MAGICAL EARS COLLECTIBLES 112322 Mickey Mouse Remote Control Trackless Train Instructions

MAGICAL EARS COLLECTIBLES 112322 Mickey Mouse Remote Control Trackless

Train

4 MODES

MODE 1 “INDEPENDENT MODE” (LOCOMOTIVE)

1. Slide the switch on the backside of the remote control to the ON position (as shown in the image). The pairing indicator (red LED) on the remote control will start blinking.
2. Slide the switch on the bottom of the Locomotive to the “I” location.
3. When paired successfully, the pairing indicator (red LED) on the remote control will stop blinking and remain solid ON. The locomotive is now ready for play.
   • NOTE: If the LED continues to blink and does not change to solid ON, the pairing has not been completed. Start over and repeat steps 1-2.
4. If no activity is detected after 5 minutes, the Locomotive will turn OFF. Slide switch to OFF (“O”) then back to Independent Mode (“I”) to turn Locomotive back ON.

MODE 1 “INDEPENDENT MODE” (RAILWAY CAR)

1. Slide the switch on the bottom of the Railway Car to the “I” location.
2. Watch it roam, spin, and shake freely! Railway Car(s) will sense the surroundings to help prevent hitting objects.
   • NOTE: The guest is not able to control the Railway Car(s) with remote control.
3. If no activity is detected after 5 minutes, the Railway Car will turn OFF. Slide switch to OFF (“O”) then back to Independent Mode (“I”) to turn Railway Car back ON.

MODE 2 “FOLLOW ME MODE”

1. Slide the switch on the backside of the remote control to the ON position (as shown in the image). The pairing indicator (red LED) on the remote control will start blinking.
2. Next, slide the switch on the bottom of the Locomotive to the “II” location.
3. When paired successfully, the pairing indicator (red LED) on the remote control will stop blinking and remain solid ON.
4. NOTE: If the LED continues to blink and does not change to solid ON, the pairing has not been completed. Start over and repeat steps 1-2.
5. Slide the switch on the bottom of the Railway Car(s) to the “II” location.
6. Place Railway Car(s) directly behind the Locomotive to have them “connect”.
   • NOTE: For an optimal connection, place Railway Car(s) 1.5” – 2.0” apart.
7. Move the Locomotive using the directional joysticks on the remote control. The Railway Car(s) should follow behind!
   • NOTE: Locomotive cannot move backward when it is in “Follow Me Mode”.
   • NOTE: If the Railway Car(s) lose connection in “Follow Me Mode”, pick up Railway Car and place it behind Locomotive or other Railway Car(s) to reconnect.
8. If no activity is detected after 5 minutes, the Locomotive and Railway Car(s) will turn OFF. Slide switches to OFF (“O”) then back to Independent Mode (“I”) again to turn them back ON.

REMOTE CONTROL

“TRY ME MODE”

1. Press the button on the front of the side of the Locomotive to activate sounds.
2. Press the button on the front of the Railway Car(s) to activate sounds.
3. Sounds will cycle through randomly.

FCC STATEMENT

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

CAUTION:
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

NOTE:
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS B DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.

THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE IN A RESIDENTIAL INSTALLATION. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTIONS, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. HOWEVER, THERE IS NO GUARANTEE THAT INTERFERENCE WILL NOT OCCUR IN A PARTICULAR INSTALLATION. IF THIS EQUIPMENT DOES CAUSE HARMFUL INTERFERENCE TO RADIO OR TELEVISION RECEPTION, WHICH CAN BE DETERMINED BY TURNING THE EQUIPMENT OFF AND ON, THE USER IS ENCOURAGED TO TRY TO CORRECT THE INTERFERENCE BY ONE OR MORE OF THE FOLLOWING MEASURES:

• REORIENT OR RELOCATE THE RECEIVING ANTENNA.
• INCREASE THE SEPARATION BETWEEN THE EQUIPMENT AND THE RECEIVER.
• CONNECT THE EQUIPMENT TO AN OUTLET ON A CIRCUIT DIFFERENT FROM THAT TO WHICH THE RECEIVER IS CONNECTED.
• CONSULT THE DEALER OR AN EXPERIENCED RADIO/TV TECHNICIAN FOR HELP.

HEREBY, INTERNATIONAL TOY, INC. DECLARES THAT THE RADIO EQUIPMENT TYPE RADIO- CONTROLLED TOY IS IN COMPLIANCE WITH DIRECTIVE 2014/53/EU. THE FULL TEXT OF THE EU DECLARATION OF CONFORMITY IS AVAILABLE AT THE FOLLOWING INTERNET ADDRESS:
https://support.disney.com/hc/en-gb/articles/360034640231-Declarations-of- conformity.

DO NOT IMMERSE THE PORTION WITH THE BATTERY COMPARTMENT IN LIQUID.

WARNING!
CHOKING HAZARD-SMALL PARTS. NOT SUITABLE FOR CHILDREN UNDER 3 YEARS.

BATTERY

REQUIRES 11 AAA 1.5V BATTERIES, INCLUDED.

https://support.disney.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>