Paris Rhône PE-HE010 Portable Ceramic Space Heater User Manual

: June 15, 2024
: PARIS RHÔNE

Paris Rhône PE-HE010 Portable Ceramic Space Heater User Manual

Paris Rhône PE-HE010 Portable Ceramic Space Heater

PORTABLE CERAMIC SPACE HEATER
PE-HE010

THANK YOU
F O R B E I N G O U R C U S T O M E

C U S T O M E

Your purchase is truly appreciated!
We hope you are over-the-moon with our product!

1. IMPORTANT SAFETY INSTRUCTIONS

WARNING:

IN ORDER TO AVOID OVERHEATING, DO NOT COVER THE HEATER.

If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified
person in order to avoid a hazard.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
The heater must not be located immediately below a socket-outlet.
Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
Children of less than 3 years should be kept away unless continuously supervised. Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its i ntended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8years shall not plug in, regulate and clean the appliance or perform user maintenance.
CAUTION — Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
Do not use this heater if it has been dropped.
Do not use if there are visible signs of damage to the heater.
Use this heater on a horizontal and stable surface.
WARNING: Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.
WARNING: To reduce the risk of fire, keep textiles, curtains, or any other flammable material a minimum distance of 1 m from the air outlet.

INTENDED USE

This heater is not intended for use in bathroom, laundry areas and similar moist indoor locations. Never locate heater where it may fall into a bathtub or other water container.
Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
The output of this heater may vary and its temperature may become intense enough to burn exposed skin.
Use of this heater is not recommended for persons with reduced sensitivity to heat or an inability to react to avoid burns.

ELECTRICAL SAFETY

Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tipped over.
It is normal for the plug to feel warm to the touch; however, a loose fit between the AC outlet (receptacle) and plug may cause overheating and distortion of the plug. Contact a qualified electrician to replace loose or worn outlet.
To disconnect the heater, first turn it off, then remove plug from outlet. Never pull by the cord.
Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or reloadable power tap (outlet/power strip).

This heater is hot when in use. To avoid burns, do not let bare skin touch hot surface. Keep combustible materials such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (0.9m) from the front of the heater.
Extreme caution is necessary when this heater is used by or near children or invalids and whenever the heater is left operating and unattended.
Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Discard heater or return heater to authorized service facility for examination, electrical or mechanical adjustment, or repair.
Do not use the heater outdoors.
To prevent a possible fire, do not block air intakes or exhausts in any manner.
Do not use on soft surface, like a bed, where openings may become blocked.
A heater has hot and arcing or sparking parts inside. Do not use it in the areas where gasoline, paint, or flammable liquids are used or stored.
Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
Always unplug the heater when not in use.
Never tamper with the heater or attempt to fix it. Any tampering with, or modification of this product can result in serious injury, death, or fire, risk of electric shock. Do Not open. No user serviceable parts inside.
DO NOT remove product labels that contain warnings or safety instruction.
Before cleaning, or storage, or when not in use, turn the heater off and unplug it.

SPECIFICATIONS

Model	PE-HE010
Power	High Level Warm Air (2000 Watts)

Low-Level Warm Air (1200 Watts)
Voltage| 220-240V AC 50Hz

2. KNOWING YOUR HEATER

KNOWING YOUR HEATER

3. USING YOUR HEATER

Control Panel

| Power On/Off
Tap to power on/off.
---|---
| Warm/Cool Air
Tap to select high-level warm air/low-level warm air/cool air.

| Temperature/Time +/-
Tap to set the desired temperature.
(5℃-35℃)

Tap to set the activated timer to power off. (0-12h)

| Oscillation
Tap to enable/disable heater oscillation.
| Timer for power-off
Tap to activate the timer for power-off.

Long press to cancel the timer.

LED Display

Additional Functions

Memory Function

The heater is designed with power-off memory function, it will remember your last settings (except timer setting) once you power it on again.

Over-heat Protection

If the ambient temperature is higher than 50℃, the heater will beep 10 times, and the error code “FF” on the display will ﬂash slowly for 75s and then remain on. Please unplug it. When the ambient temperature drops below 50℃, plug the heater and reuse it.

Tip-over Protection

If the heater is tipped over, the error code “P4” will appear on the display, and tapping all buttons will be unresponsive. When placing it back on a flat, level and stable surface and remain upright, it will enter standby mode.

Auto Display-off

The auto display-off function will be activated by default once the heater is turned on. Tapping any button can light up the display.

4. TROUBLESHOOTING

Short circuit occurred when using.

Please ensure that the heater works within the load power of the household circuit, and the rated current of the used socket is larger than 15A.
If the socket has been used for a long period, the plug and socket will get loose. It is recommended to replace with a new and regular-brand socket, otherwise it may cause a short circuit.
Avoid using the heater and other high-power electrical appliances at the same time. Do not plug other electrical appliances into the socket where the heater is plugged in at the same time.
Always unplug the heater when it is left unattended or not in use.

Heater fails to power on.

Make sure the power cord is securely plugged into the outlet.
Make sure the heater is placed on a flat and even surface, and remain upright.

Heater suddenly stops during heating.

Make sure the preset temperature is higher than the ambient.
Make sure the heater is placed on a flat and even surface, and remain upright.
If the ambient temperature is higher than 50℃, the heater will stop heating. Unplug it and use it later.

Heater powers on but there is no heat.

Select the high-level warm air.
Close door and window to guarantee good airtightness.
Place in a position conducive to air convection

Error code appears on the display.

E1: sensor open circuit
E2: sensor short circuit
The heater will beep 10 times and tapping all buttons are unresponsive.
Unplug it from the power source and contact Paris Rhône Customer Support.

The troubleshooting guide addresses the most common problems. If problems persist, feel
free to contact the Customer Support at
support@parisrhone.co

Unplug the heater, and use the brush attachment on your household vacuum cleaner to vacuum any accumulated dust off the air inlets/outlets. Wipe down the entire surface with a soft cloth.
Place the heater back in the retail carton to protect it from dust. Store it in a cool, dry location

WARRANTY AND SERVICE

Thanks for choosing Paris Rhône PORTABLE CERAMIC SPACE HEATER .

This product is covered with Paris Rhône product and labor warranty for 12 months from the date of its original purchase.

The warranty will not apply in cases of:

– Accident, misuse, or repairs performed by unauthorized personnel.
– Any unit that has been tampered with or used for commercial purpose.
– Normal wear and tear of wearable parts.
– Use of force, damage caused by external influences.
– Damage caused by non-observance of the User Manual,e.g. connection to an unsuitable mains supply or non-compliance with the instructions.
– Partially or completely dismantled appliances.
– Defects caused by or resulting from damages from shipping or from repairs, service, or alteration to the product or any of its parts that have been performed by a repair person not authorized by Paris Rhône.

We can only provide after sales service for products that are sold by Paris Rhône or Paris Rhône authorized retailers and distributors. If you have purchased your unit from a different place, please contact your seller for return and warranty issues.

※Please have your invoice and order ID ready before contacting Customer Support.