AEOTEC 360 SmartThings Cam User Guide
- June 8, 2024
- Aeotec
Table of Contents
Aeotec Cam 360 user guide.
Modified on: Tue, 31 Aug, 2021 at 2:33 PM
360 SmartThings Cam
Aeotec Cam 360 was develop to wirelessly monitor your home using WiFi
communication through SmartThings app.
It is powered by (https://www.popp.eu/products/) Aeotec WiFi
(http://aeotec.com/z-wave-gen5) technology.
The ( https://aeotec.freshdesk.com/a/solutions/articles/6000227919
)technical specifications of Aeotec Cam 360
( https://help.aeotec.com/support/solutions/articles/6000240798-aeotec-
cam-360-technical-
specifications )
( https://aeotec.freshdesk.com/a/solutions/articles/6000227919 )can be
viewed at that link.
Get familiar with your Aeotec Cam 360
Package Content
- Aeotec Cam 360
- USB Cabel
- Power Adapter
LED Status Indicator
LED Status Indicator | Status |
---|---|
No light | |
Blue on | |
Blue Slowly Blinking | |
Blue QuicklyBlinking | |
Alternately flashes Blue and Amber | |
Amber on | |
Amber Quickly Blinking | |
Amber Slowly Blinking |
Important safety use information
- For indoor use only.
- Avoid installing in wet or humid places.
- Avoid installing in high temperature environments, such as near radiators, stoves or other heat sources.
- Avoid installing on appliances that generate vibration, such as refrigerators or air conditioners.
- Avoid installing it near devices that emit strong radio waves as this may degrade wi-fi performance.
- This product can be placed on a flat surface, such as a desk or table.
- This product can be mounted on a wall or celling with supporting installation accessories.
- This product do not rotate head over allowed range (-180⁰ ~ +180⁰).
Install your Aeotec Cam 360
Pair to SmartThings app.
Before moving forward, make sure that you connect your phone to Wifi where
device is used, and download an open SmartThings App.
SmartThings is available to download on Android devices with at least 2GB of
RAM running Android 8 or higher.
Check
https://play.google.com/store/apps/details?id=com.samsung.android.oneconnect&hl=en_US&gl=US
(
https://play.google.com/store/apps/details?id=com.samsung.android.oneconnect&hl=en_US&gl=US)
for more details.
For iOS devices, you’ll need to be running iOS 11 or later. Check
https://apps.apple.com/us/app/smartthings/id1222822904
( https://apps.apple.com/us/app/smartthings/id1222822904 ) for more
details.
Through QR Code.
-
Open SmartThings.
-
Tap Add (+)
-
Tap Device
-
Select “Scan QR code”
-
Scan the QR Code located on Aeotec Cam 360
1. If you are having issues, select “Add Device Manually”
2. Input Aeotec Cam 360 Serial Number. -
Plug Cam 360 into any outlet within range of your WiFi Router.
-
Once SmartThings discovers the device, choose its Room and Location.
-
Tap Next.
-
Select a WiFi Network for Aeotec Cam 360 and enter the security password.
Through Catalog.
- Open SmartThings.
- Tap Add (+)
- Tap Device
- Choose Brand “Aeotec”
- Select “Camera”
- Tap “Start” then plug your Aeotec Cam 360 within range of your WiFi Router.
- Scan the QR code on Aeotec Cam 360.
- Once SmartThings discovers the device, choose its Room and Location.
- Tap Next.
- Select a WiFi Network for Aeotec Cam 360 and enter the security password.
Other Functions
Access Settings of Cam 360
Cam 360 offers a lot of different settings and options to fully automate and
or adjust how you want your Cam 360 to act. Accessing the menu is key to
accessing all of the hidden settings of the camera.
- Select Cam 360 in SmartThings
- Tap More Options (3 dot icon) located top right corner.
- Tap Settings
- This will give you all of the settings available for your Cam 360 which you would be able to control these specific settings:
• HDR
• Night Vision
• Wide angle view
• Image flip
• Audio sensitivity
• Speaker volume
• Status light
• Camera off location
• Waypoint Monitoring
Factory Reset
If you are having issues connecting Cam 360 to SmartThings app, use factory reset following the steps outlined below:
- Hold the reset button located on the back of Cam 360 for 3 seconds
- Release the reset button (as soon as the LED begins blinking blue)
- The speaker will sound “The camera is booting, please wait” to confirm that it is factory reset
- Once the LED begins blinking amber, the Cam 360 is factory reset and ready to be paired following the pair steps above.
WiFi Signal Strength
This function in SmartThings app will allow you to check the signal strength
between your WiFi Router and Aeotec Cam 360. This should be used if your Cam
360 becomes unavailable.
- Select Cam 360 in SmartThings
- Tap More Options (3 dot icon) located top right corner.
- Tap “Check WiFi signal strength”
Waypoint Monitoring
Waypoint monitoring allows your cam to check specific locations and monitor
those locations occasionally for movement instead of looking in a single
direction.
- Select Cam 360 in SmartThings
- Tap More Options (3 dot icon) located top right corner.
- Tap Settings
- Select “Waypoint Monitoring”
Troubleshooting
LED is not blinking amber upon initial power
If the indicator light flashes amber, this would indicate that your Cam 360
successfully booted up. If the indicator light is not flashing amber, please
reset the device following the Factory Reset steps under Other Functions.
Mobile discovery error
If Cam 360 is unable to pair with your mobile device after a factory reset,
follow the steps below:
- Confirm if the LED indicator is blinking amber
- Power cycle your Cam 360 (remove power, wait 30 seconds, then power it back up)
- Confirm that Cam 360 is within range of your mobile device for onboarding.
- Force close, then re-open SmartThings.
- Ensure QR code is scanned correctly
- Use the manual method of adding Cam 360.
Device setup error
If Cam 360 pairs with your mobile device, but fails to onboard, follow the
below steps which should help with setup finalization.
- Factory reset Cam 360
- Confirm that device is within range of your 2.4GHz WiFi network
- Ensure WiFi credentials were properly entered.
- Reboot your WiFi router and ensure there are no special network settings that may affect discovery (mesh networks, firewall, etc).
Cam 360 offline
If Cam 360 goes offline after it is added to SmartThings, follow the steps
below:
- Confirm that the Cam 360 is getting power and that the LED indicator is on.
- Confirm that the Cam 360 is in range of your WiFi network by testing its signal strength
- Reboot Cam 360 by unplugging it and then plugging it back in.
- Reboot your WiFi router and confirm that there have been no changes to your network.
- Remove Cam 360 from your SmartThings app, then factory reset Cam 360 and reconnect it.
If SmartThings app does not work
Please re-start the app. If this status persists, please contact
support@smartthings.com.
https://help.aeotec.com/support/solutions/articles/6000240797-aeotec- cam-360-user-guide-
Documents / Resources
|
AEOTEC 360 SmartThings
Cam
[pdf] User Guide
360 SmartThings Cam, 360, SmartThings Cam, Cam
---|---
References
- Zwave - Aeotec
- Loading...
- s3.amazonaws.com/cdn.freshdesk.com/data/helpdesk/attachments/production/6117254116/original/7v66ZgoM8FnP6ZHVjttAkVI4Bsnsrs3Ckw.png?1606221671
- s3.amazonaws.com/cdn.freshdesk.com/data/helpdesk/attachments/production/6122021378/original/VPN8Y_NHTQKxGO5dmUnwBpZ-SRWt-Hx2jg.png?1614054033
- Products - popp.eu