aoeyoo AYK-81V14 8-PORT HDMI KVMSwitch User Manual

aoeyoo AYK-81V14 8-PORT HDMI KVMSwitch User Manual

Operating Instructions

Dear Customer
Thank you for purchasing this product. For optimum performance andsafety, please read these instructions carefully before connecting, operating or adjustingthis product. Please keep this manual for future reference.

FEATURES

• Using only 1 set of keyboard, mouse and monitor to control 8 host devices.

• Support Windows 95/98/2000/2003/NT/XP/WIN7/WIN8, Linux, Unix, MAC.

• Support hot plug, connect or disconnect devices to the KVMswitchinanytime and without turn off devices.

• Support auto switching (monitor the devices in a specified time interval.

• Support keyboard hot keys to control KVM switch.

• Available to use keyboard and mouse without any delay after switchhost
  devices.

• Support auto switching host devices by just moving mouse.

• Support resolution up to 1920*1440.

• With mounting ears.

NOTICE
Our company reserves the right to make changes in the hardware, packagingand any accompanying documentation without prior written notice.

SPECIFICATIONS

1xUSB Type A Female
Video| 1x HDMI Female
Mouse| 1x USB Type A Female
KVM Ports| Keyboard/Mouse| 8xUSB TypeB Female
Video| 8xHDMI Femal
Power| 1xDC Jack
Switches| Port Selection| 8xPushbutton
Reset| 1xPushbutton
Switch control way| Auto Switching, Timming Switch, Mouse movement switching
**** LEDS| USB Link| 8( Green)
On line/Selected| 8( Green)
Rest| 1( Red )
Emulation| Keyboard/Mouse| USB
Bandwidth| 2.25Gbps
Vedio| Resolution (Max) reach up to 1080p(1920*1440)
Scan interval| More than 1’s ( Default 6 secs)
Power Consumption| DC 12V,5watts ( Max)
**** Enviroment| Operation Temperature| +32 to +104 ℉ (0 to +40℃）
Storage Temperature| -4 to +140 ℉ (-20 to +60℃）
Humidity| 20-90%RH(No condensation)
**** Physical Properties| Housing| Metal, Black
Weight| 1.85kg
Dimensions(LxWxH)| 48.1X14.2X4.4cm

Note: Specifications are subject to change without notice. Mass and dimensions are approximate.

PACKING CONTENTS

1. HDMI KVM switch
2. 2VDC Power Supply.
3. Mounting ear 1 pair
4. Safety check: After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition.

WARRANTY

If your product does not work properly because of a defect in materials or workmanship, our Company (referred to as “the warrantor” ) will , for the length of the period indicated as below, (Parts(2)Year ,Labor(90) Days) which starts with the date of original purchase (“Limited Warranty period”), at its option either(a) repair your product with new or refurbished parts, or (b) replace it with a new of a refurbished product. The decision to repair or replace will be made by the warrantor. During the “Labor” Limited Warranty period there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. You must mail-in your product during the warranty period. This Limited Warranty is extended only to the original purchaser and only covers product purchased as new. A purchase receipt or other proof of original purchase date is required for Limited Warranty service.

Mail-In Service
When shipping the unit carefully pack and send it prepaid, adequately insured and preferably in the original carton. Include a letter detailing the complaint and provide a day time phone and/or email address where you can be reached.

LIMITED WARRANTY LIMITS AND EXCLUSIONS

1. This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by warrantor,or failures which result from accidents,misuse,abuse,neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or service by anyone other than a Factory Service center or other Authorized Servicer, or damage that is attributable to acts of God.
2. THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”.THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRNTY. (As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, travel to and from the service, loss of or damage to media or images, data or other recorded content. The items listed are not exclusive, but are for illustration only.)
3. PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.

PANEL DESCRIPTIONS

1. Working status indicators.
2. Switch button.
3. Reset button.
4. Rest status indication.

1. 12V DC power input.
2. HDMI out port.
3. USB keyboard and mouse output ports.
4. HDMI in ports.
5. USB keyboard and mouse input ports.

CONNECTION DIAGRAM

HOW TO USE KEYBOARD HOT KEYS:

1. Hit ScroIILock key twice within 2 seconds, then the buzzer will beep twice.
2. After step 1 then enter following hot key commands within 3 seconds, the KVM will execute the corresponding commands

FAQ

Keyboard and mouse don’t work at all no matter which input port is switched to| Try below ways: 1. Unplug and plug the USB keyboard and mouse2. Make sure the USB cable connections fromKVM switch to host devices are all correct3. Reset the KVM switch by press RESETkey4. Unplug and plug the power cord of theKVMswitch then press RESET key5. Make sure the precision of the mouse is lessthan 2000DPI
Only after switch to some input port thekeyboard and mouse don’t work| Make sure the USB cable connection fromKVMswitch to host devices is correct and theUSBcable isn’t broken
Mouse is slowed down/lag/delayed in Windows 95/98/2000 system| 1. Go to device manager of the Windows, makesure the KVM USB device is recognizedbyWindows, if not, go to Windows control panel andadd new hardware manually2. After KVM USB device is recognizedbyWindows, install USB drivers in Windows devicemanager

MAINTENANCE

Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzineto clean this unit.

PRODUCT SERVICE

1. Damage requiring service: The unit should be serviced by qualifiedservicepersonnel if:
   (a) The DC power supply cord or AC adaptor has been damaged;
   (b) Objects or liquids have gotten into the unit;
   (c) The unit has been exposed to rain;
   (d) The unit does not operate normally or exhibits a marked change in
   performance;
   (e) The unit has been dropped or the cabinet damaged.

2. Servicing Personnel: Do not attempt to service the unit beyond that
   described in these operating instructions. Refer all other servicing to authorizedservicing personnel.

3. Replacement parts: When parts need replacing ensure the serviceusesparts specified by the manufacturer or parts that have the same characteristicsas the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>