Amax Lighting LED-RSM7DL Built In Radar Sensor Owner’s Manual
- June 12, 2024
- Amax Lighting
Table of Contents
Amax Lighting LED-RSM7DL Built In Radar Sensor
Product Information
The LED-RSM7DL is a 7 inch radar sensor LED ceiling mount light designed for new construction and remodel in wet locations. It features a built-in radar sensor that automatically turns on the light when motion is detected, providing 900 lumens of warm white light (3000K). Its sensing distance ranges from 4.5-5.5 yards and has a duration of 17 seconds when motion is detected. It is made of aluminum construction with a polycarbonate trim ring, and a diffused polycarbonate lens that controls direct glare from the LEDs. It is ideal for use in closets, bathrooms, hallways, stairways, kitchens, workplaces, garages, basements, storage, or utility rooms.
Specifications:
- Description: 7 inch radar sensor LED ceiling mount light
- Input Power: 15W
- Input Voltage: 120V
- Input Frequency: 60Hz
- Power Factor: 0.90
- Lumen: 900
- CCT: 3000K
- CRI: 90+
- Back Convex Dimension: 2 1/8×5/8
- Life: 50,000 hrs
- Warranty: 5 years Limited
- Certification: SGS Certified, Wet Location
Features:
- Diffused polycarbonate lens controls direct glare from the LEDs
- Aluminum construction with polycarbonate trim ring
- Simple snap-in installation for J-Box
- Can be installed in a 3 or 4 J-Box
- Turns off after 17 seconds delay if no motion is detected
- Turns on when motion is detected, in the dark or daytime
- Radar occupancy sensor
Product Usage Instructions
- Locate a suitable J-Box for installation.
- Turn off the power supply to the J-Box.
- Remove the old fixture and disconnect any wiring connected to it.
- Connect the wiring to the new LED-RSM7DL fixture according to the wiring diagram in the product manual.
- Attach the fixture to the J-Box using the provided screws and snap-in mechanism.
- Turn on the power supply to the J-Box.
- The LED-RSM7DL will automatically turn on when motion is detected and turn off after a 17 second delay if no motion is detected.
Specifications
Description:
This 7 inch radar sensor LED ceiling mount light is a perfect solution for areas where you need light to automatically turn on when motion is detected. This light features a 17 second duration of light when motion is detected, and with range up to 4.5-5.5 yards. Providing 900 lumens, 3000K warm white. The ideal luminaire to apply in a: closet, bathroom, hallway, stairway, kitchen, workplace, garage, basement, storage or utility room. Wet location rated.
OVERVIEW
Features
- Diffused polycarbonate lens controls direct glare from the LEDs
- Aluminum construction with a polycarbonate trim ring
- Simple snap in installation for J-Box
- Can be installed in a 3″ or 4″ J-Box
- Turns off after 17 second delay if no motion is detected
- Turns on when motion is detected, in the dark or daytime
- Sensing distance: 4.5-5.5 yards
- Radar occupancy sensor
Performance
- Input Power 15W
- Input Voltage 120V
- Input Frequency 60Hz
- Power Factor ≥0.90
- Lumen 900
- CCT 3000K
- CRI 90+
- Back Convex Dimension 2 1/8″x5/8″
- Life 50,000 hrs
- Warranty 5 years Limited
- Certification SGS Certified, Wet Location
Catalog Number
- Item LED-RSM7DL/WT
- Finish White
- Color Temp. 3000K
- Watt 15W
- Dimension 7″x1/2″
Amax Lighting, Inc.
10268 Santa Fe Springs Road, Santa Fe Springs, CA 90670
Tel: 562-945-5221
Fax : 562-464-1664
www.amaxlighting.com