TRADE FORCE TF Glove Instruction Manual
- June 8, 2024
- TRADE FORCE
Table of Contents
TRADE FORCE TF Glove Instruction Manual
A. Use
These gloves are designed to protect the hands mainly against mechanical risks and comply with the applicable harmonized EN or EN ISO Standards as shown by the pictograms being mentioned on the gloves or packaging enclosures. The gloves therefore will provide protection against the specific risks as shown by these pictograms which are defined by these harmonized standards. The gloves are in conformity with the European Regulation 2016/425/EU. Please ensure the glove are used only for the designated purposes, as explained above. The levels of performance against mechanical risks are only for the palm of the glove. The glove is not washable.
Explanation of symbols & pictograms
Test agency:
These gloves are certified by: CTC (0075), 4 Rue Hermann Frenkel 69367 Lyon, Cedex 07, France
Declaration of conformity:
For a copy of the dedaration of conformity we would like to refer you to the following web link: www.buytradeforce.com
B. Precautions for use
- Never use the gloves with chemicals.
- Before usage, inspect the gloves for any defects or imperfections. Avoid wearing gloves which are dirty on the inside- they may irritate the skin, causing dermatitis or worse.
- Gloves should not come in contact with a naked flame.
- Contaminated gloves should be cleaned or washed or wiped dry before removal
- Gloves which have a tear level of 1 or above(as per EN 388)should not be used for protection against serrated blades or when there is a risk of entanglement with moving machine parts.
C. Hazardous ingredient
Some gloves might contain ingredients which are known to be a possible cause of allergies in sensitised persons, who may develop irritant and/or allergic contact reactions. If allergic reactions should occur, obtain medical advice immediately.
Warning: If the product contains nature rubber latex, it may cause allergic reactions.
For more information, please contact TRADEFORCE.
D. Care instructions
Storage : Keep away from direct sunlight; store in a cool dry place and
keep in the original packaging. Keep away from ozone sources. If gloves are
properly stored, as indicated above, they won’t lose their performances and
won’t change the glove characteristics significantly If gloves could be
affected by ageing or storage, the expiry date is mentioned on the packaging
materials.
Cleaning : Gloves that can be laundered will carry care pictograms, which
will be depicted on the specific information on or inside each packaging
enclosure. For these gloves, the performance of the unused glove will not be
reduced after 1 laundering cycle. It is the customer or launderer who is
responsible for the performance of the gloves after laundering when the gloves
have already been used TRADEFORCE cannot be held liable for this.
E. Disposal
Used gloves may be contaminated with infectious or other hazardous materials.
Dispose of according to Local Authority Regulations. Landfill or incinerate
under controlled conditions.
GLOVE SIZE CHART
Measure width of palm(as shown below) and refer to chart to determine
estimated glove size
For “in between” results it is recommended to select the larger size
Disclaimer : Sizing chart is a guide only, glove type may vary in actual size and dimensions depending on style, materials and cut. Glove fit cannot account for individual preferences. For more into contact.