VONYX STM3030 Mixer 4 Channel Instruction Manual

: June 8, 2024
: VONYX

Table of Contents

VONYX STM3030 Mixer 4 Channel
UNPACKING INSTRUCTION
OPERATION
- FRONT PANEL
TECHNICAL SPECIFICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VONYX STM3030 Mixer 4 Channel

VONYX STM3030 Mixer 4 Channel product

Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the unit in order to benefit fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference.

Prior to using the unit, please ask advice from a specialist. When the unit is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
The unit contains voltage carrying parts. Therefore do NOT open the housing.
Do not place metal objects or pour liquids into the unit This may cause electrical shock and malfunction.
Do not place the unit near heat sources such as radiators, etc. Do not place the unit on a vibrating surface. Do not cover the ventilation holes.
The unit is not suitable for continuous use.
Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
When unplugging the unit from a mains outlet, always pull the plug, never the lead.
Do not plug or unplug the unit with wet hands.
If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
If the unit is damaged to such an extent that internal parts are visible, do NOT plug the unit into a mains outlet and DO NOT switch the unit on. Contact your dealer. Do NOT connect the unit to a rheostat or dimmer.
To avoid fire and shock hazard, do not expose the unit to rain and moisture.
All repairs should be carried out by a qualified technician only.
Connect the unit to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.
During a thunderstorm or if the unit will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
If the unit has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on. Never use the unit in humid rooms or outdoors.
To prevent accidents in companies, you must follow the applicable guide lines and follow the instructions.
Do not repeatedly switch the fixture on and off. This shortens the life time.
Keep the unit out of the reach of children. Do not leave the unit unattended.
Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
Do not force the controls.
This unit is with speaker inside which can cause magnetic field. Keep this unit at least 60cm away from computer or TV.
This unit is with built-in lead-acid rechargeable battery. Please recharge the battery every 3 months if you are not going to use the unit for a long period of time. Or the battery may be damaged.
If the battery is damaged please replace with same specifications battery. And dispose the damaged battery environment friendly.
If the unit has fallen, always have it checked by a qualified technician before you switch the unit on again.
Do not use chemicals to clean the unit. They damage the varnish. Only clean the unit with a dry cloth.
Keep away from electronic equipment that may cause interference.
Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
Switch the unit off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the unit.
Make sure that the mains lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
The mains voltage is 220-240Vac/50Hz. Check if power outlet match. If you travel, make sure that the mains voltage of the country is suitable for this unit.
Keep the original packing material so that you can transport the unit in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.

The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION!
Immediately upon receiving of the equipment, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing materials. In the event that an equipment must be returned to the factory, it is important that the equipment be returned in the original factory box and packing. If the equipment has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.

POWERSUPPLY
On the label on the backside of the equipment is indicated on this type of power supply must be connected. Check that the mains voltage corresponds to this, all other voltages than specified, the equipment can be irreparably damaged. The equipment must also be directly connected to the mains and may be used. No dimmer or adjustable power supply.

OPERATION

POWER ON – Once you have made all the equipment connections to your DJ- mixer, press the POWER (11). The power will turn on and the POWER LED (10) will glow RED.
CHANNEL 1 – SWITCH (4) allows you to select the PHONO 1/LINE 1 (18) jack to input phono or line level. The CHANNEL SLIDE (5) controls the output level of this channel.
CHANNEL 2 – SWITCH (6) allows you to select the PHONO 2/LINE 2 (19) jack to input phono or line level. The CHANNEL SLIDE (7) controls the output level of this channel.
CHANNEL 3 – SWITCH (8) allows you to select the MP3 OR LINE 3 (20) jack to input phono or line level. The CHANNEL SLIDE (9) controls the output level of this channel.
CROSSFADER – The CROSSFADER (13) allows you to the Mixing CH1/CH2 source into another.
MIC – Connect the microphone with a 1/4” connector at the rear panel (16 and 17). The volume of microphone 1 and 2 can be controlled with the microphone volume control (2).
TALKOVER (3) – The purpose of the talk over section is to allow the program playing to be muted so that the mic can be heard above the music. When you press the SWITCH, the talk over will be on and the volume of all sources except the Mic inputs are lowered by 12dB. The MIC VOL (2) allow you to control the level of MIC1/MIC2.
PHONE – Connect your headphones to the headphones socket (22) and select the desired channel (channel 1-3 or MIC) for monitoring with the Cue switch(1). With this knob PHONE(14), you can adjust the headphones volume
VU-Meter – The VU-meter (12) indicates either the MASTER output left and right levels.
MP3 PLAYER (15) – SD / USB / BT-Player. See explanation later.

FRONT PANEL

VONYX STM3030 Mixer 4 Channel 01 REAR PANEL USB / SD / BT PLAYER

LCD DISPLAY
The LCD display show you some information as playback support, file name, elapsed time, total time, file number, total file number, file system (MP3 or WAV ) and playback mode (Repeat one, repeat all, random or repeat intro).
Note: In BT-mode, LCD display show only connexion status (connected or disconnected). All playback information are on the BT-device.
SD CARD
Connect on this slot your SD card.
Note: Before to eject SD card, please set the playback in pause mode or select another playback support (USB or BT).
USB
Connect on this slot your USB key.
Note: Before to eject the USB key, please set the playback in pause mode or select another playback support (SD card or BT).
MODE
This button have two functions :
- A short press allows you to choose the playback support : SD, USB or BT.
- A long press allows you to switch the MP3-player ON or OFF.
  Note: If you choose BT-mode, the MP3-player will enable BT-connexion system. You can join your BT-device with the player. For that, you must to enable your BT-system on your device. You device will search the player and find the BT-system called (BT). To link your device to the player, you must to enter PIN code 0000. Now, your device and the MP3-player are linked. You must to start playback on your device to listen it on the mixer.
PLAY / PAUSE
This button is used to start the playback or to enter in pause mode.
FOLDER / RECORD
This button have two functions :
- A short press allows you to select a directory on the playback support (SD card or USB). For that , select a directory in using track selection buttons ( 8 and 9 ). Then press folder button to enter in the directory. After select the file you want to listen in using track selection buttons ( 8 and 9 ) than press folder button to start the playback.
- A long press allows you to record your mix. The master signal will be recorded (all input except SD / USB player). The record will be done on the playback support you use before to start the record.
REPEAT / DELETE
This button have two functions :
- A short press allows you to choose play mode (repeat all file, repeat one file, repeat intro or random play).
- A long press allows you to delete one of your recorded file. For that select the file you want to delete in using track selection buttons (8 and 9) then press (and hold the press) the repeat button to delete the file.
TRACK / SEARCH
This button have two functions :
- A short press allows you to select the previous file.
- A long press allows you to do the fast back search on the file.
TRACK / SEARCH

This button have two functions :

A short press allows you to select the next file.
A long press allows you to do the fast search on the file.

TECHNICAL SPECIFICATION

Power supply: 12V DC/500mA via 230VAC 60/50Hz adapter
Frequency response: 20Hz – 20kHz
THD: <0.02%
Input Line: 150mV/100k
Phono: 3mV/50k
Mic: 1mV/1k
Output Master: 1.5V/600 ohms
Headphone: 200Mw
Signal to noise Line: >80dB
Phono: >70dB
Mic: > 70dB
Dimension: 132x267x55mm
Weight: 1.15kg

The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice. The products referred to in this manual conform to the European Community Directives to which they are subject: