rizoma PTS668 Plate Holder User Manual
- June 8, 2024
- rizoma
Table of Contents
PTS668 Plate Holder
User Manual
Welcome to Rizoma
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate
you for your excellent choice. Please carefully follow the instructions in
this guide, which will allow you to mount and use the product correctly and
enjoy all the features it has.
For your protection and safety, RIZOMA expressly recommends that you have the
installation of the product performed by skilled personnel. Improper
installation, repair or maintenance, can cause accidents. Keep this user guide
as a reference for the future.
General conditions
Attention: This component comes assembled for shipping purposes only.
Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or
procedures, which, if not followed, may result in death or serious injury.
- Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
- For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
- After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly suggest to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike.
Your RIZOMA products require regular inspection and maintenance. The more you
ride the more often you must inspect your RIZOMA products. If your products
are leaking, bent, deformed, cracked, chipped or worn, no matter how slight,
immediately have a RIZOMA dealer inspect the products before you ride again.
In any case never try to repair or modify the Rizoma products or their
components, always replace with Rizoma original components.
Rizoma products may not be compatible with your motorcycle or with other
aftermarket equipment installed before. For your safety Rizoma suggests to
always contact your RIZOMA dealer.
O.E.M.: original equipment manufacturer.
License plate
– Before you
start mounting the product please check the completeness of the kit on the
part list. The difficulty level and the time of assemblage shown do not
include the removal of OEM components.
Warning: Make sure that your motorbike is standing firmly before you
start work, as a fall may lead to damage to the motorbike or injury to you or
others, also make sure that the temperature of the exhausts and the engine are
similar to the ambient temperature.
WARNING: TO CLEAN YOUR LICENSE PLATE DON’T USE DETERGENT, AGGRESSIVE
PRODUCTS OR ABRASIVE SPONGE THAT CAN DAMAGE OR SCRATCH YOUR LICENSE PLATE, BUT
USE ONLY NEUTRAL DETERGENT WITH COLD WATER.
– Improper installation could damage the electrical system of the motorcycle
and cause a fire, resulting in personal injury or death. Electrical shock
hazard. Disconnect the battery before starting to install turn license plate
bracket or rear light or the turn signals. The pins must always be isolated
and respect the polarity in the connections. The warrantee is not valid for
any electric wires cutting or any product modify or tampering.
REMOVE ORIGINAL LICENSE
PLATE
INSTALL
M6X60 SCREW
INSTALL
STICKER
INSTALL
BRACKETS
INSTALL BUSHINGS AND RUBBERS
INSTALL
SPACER
INSTALL
BRACKETS ON CHASSIS
TIGHTEN SCREWS
INSTALL LICENSE PLATE LIGHT
INSTALL UNIVERSAL LICENSE PLATE
INSERT
WIRING
ADJUSTMENT
REFLECTOR
CONNECTIONS
WARNING:
FOR CORRECT INSTALLATION OF LICENSE PLATE LIGHT FOLLOW THESE STEPS: RESPECT
THE POLARITY IN THE CONNECTIONS AND ALWAYS CHECK THAT THE TERMINALS ARE
ISOLATED.
Warnings
RIZOMA reserves the right, in its sole discretion, to make changes to the
product and this information at any time and without prior notice. Although
many catalogs and advertisements depict riders engaged in extreme or stunt
riding, this activity is extremely dangerous, increases the risk of an
accident, and increases the severity of any injury. The action depicted is
performed by professionals under strictly controlled riding conditions.
Only you know the limits of your riding ability and only you can control the
conditions under which you ride. By and in consideration for his/her purchase
and use of the RIZOMA product, the user expressly recognizes and agrees that
in the event of any claim arising out of the use of this RIZOMA product,
whether such claim is based in contract, warranty, tort (personal injury or
wrongful death) or otherwise, the laws of the Republic of Italy shall apply
and jurisdiction and venue for any such action shall be in the Courts of Busto
Arsizio, Italy.
All riders are strongly urged to take a motorcycle rider safety clinic. Always
wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a
full face helmet), that has been approved by ANSI , SNELL, CE, or any other
relevant authority, and any other safety equipment necessary for your riding
style, such as full finger gloves, boots, and body armor.
Be sure to read and follow all the instructions and warnings that originally
accompanied your motorcycle, as well as the literature that accompanied any
other component parts installed on your motorcycle.
Be sure that your tires are inflated to the correct pressure and that there is
no damage whatsoever in the tread or sidewall of the tire.
Legal note
Some of our products may not be approved for road circulation in the
countries where homologation is required.
Thus RIZOMA® srl declines any responsibility for a different use of its
products.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>