Maxax F21-PK Columbus 60 Inch Pink-Gold Tripod Floor Lamp Instruction Manual
- June 8, 2024
- Maxax
Table of Contents
Maxax F21-PK Columbus 60 Inch Pink-Gold Tripod Floor Lamp
Dear Customer:
Thank you for your business!
If you have any question or problem, please send us an email to
support@4modernhome.com or call us at
870-949-8466. We will do everything
possible to make you completely satisfied with your purchase. Product reviews
help future customers to make their purchase decision.
You are encouraged to share your experience by leaving a short product review
on the platform where you bought this product.
Thank you!
Assembly & Installation Instructions
Warning: If any special control devices are used with this fixture,
follow the instructions carefully to assure full compliance with N.E.C.
requirements.
If there are any questions, contact a qualified electric contractor.
Warning: California Residents Proposition 65 This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
Warning: California Residents Proposition 65 This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
Caution: It is highly recommended to get an electrician to install this light. Please make sure to turn the electricity off at the main circuit breaker before beginning installation. All glass is fragile. Use care when handling glass component(s) and/or lamp(s)
- Unpack all parts from cartons carefully.
- Carefully pull-out excess power cord from the lamp base while assembling to prevent the cord from becoming twisted.
- Tighten the tubes(B)into the tubes(A)until tight.
- Tighten the tubes(C)into the tubes(B)until tight.
- Tighten the tubes(D)into the tubes(C)until tight.
- Tighten the whole tubes(A)(B)(C)(D)into the lamp socket (E)until tight.
- Place the shade(F)onto the lamp socket(E).
WIRE CONNECTION DIAGRAM
Wires meeting safety standards are required to connect the electical circuit
CAUTION: Risk of fire
Please read all instructions carefully. Before you proceed to install,make sure that the power supply is turned off and remains off until installation is completed.
PARTS INCLUDED
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>