Strobos STBS HSP Generator User Manual
- June 8, 2024
- Strobos
Table of Contents
Strobos STBS HSP Generator
INSTRUCTIONS FOR INSTALLATION AND OPERATION OF STROBOS SIREN HSP
Siren STBS HSP is used to generate warning (sound and light) signals in special vehicles. The device has a built-in microphone that allows you to broadcast alert voice messages freely. Siren is intended mainly for special vehicles, fire brigade, police, ambulance, military vehicles. The device is intended for motor vehicles and boats.
List of items included in the set:
- Amplifier in an aluminum housing- 1 pcs.
- Manipulator – remote control with a handle- 1 pcs.
- Cables
- Additional button
Installation instructions
The amplifier should be placed inside the vehicle, in a place not exposed to
moisture and wetting and in a place providing adequate air circulation which
ensures proper operation of the device.
The siren works with loudspeakers with 6-11 ohm impedance. Loudspeakers not
included in the warning lamp shall be mounted in the front of the vehicle in
such a way that the front is not covered by any elements of the vehicle
structure. Otherwise, the required sound pressure level may drop.
The amplifier should be mounted with at least two bolts, ensuring that the
device can’t be moved while driving.
Cables must not be exposed to contact. Their incorrect connection will damage the device. It is recommended to use the cables included in the set.
Siren HSP is not intended for boats and quads.
In case of connection problems, please contact us by email:
info@strobos.pl
We are available from Monday to Friday from 8 am to 4 pm.
Connection diagram of the amplifier
-
Siren HSP has 5 high-current outputs.
The high-current outputs should be connected with warning lamps and additional lighting. For proper installation, connect the red (+) cable from the lightbar (external warning light) to the siren, while the black (-) cable from the lightbar should be connected to the battery or vehicle installation. -
Only 12V can be connected to the 12V device. Only 24V lighting should be connected to the device at 24V. Connecting devices with incorrect working voltage can lead to damage to the device or electrical installation in the vehicle.
-
The speaker should be connected to two brown wires coming out of the cube (there is no plus and minus in the speaker, you only need to close the circuit).
-
Manipulator – The remote control should be mounted on the vehicle in a place easily accessible to the driver and passenger. The remote control holder should be screwed to the upholstery. It must not be exposed to moisture or water.
-
White cables (2 pcs) please connect to horn in vehicle.
Remote control manual
The function of quick activation of the signaling:
- First press – sound signal + lights
- Second press – blue lights only
- Disabling privileged signaling
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>