Blissaeon MetaCe BS1 Ceramic Craft Bluetooth Speaker User Manual

Blissaeon MetaCe BS1 Ceramic Craft Bluetooth Speaker

Features and Benefits

• Ceramic Craft for Better Sound Quality
  The ceramic body of the speaker is made in Jingdezhen which is known as the Millennium Porcelain Capital for its more than 2,000 years of porcelain making history.

• Enhanced Bass with DEAA Technology
  Exclusive bass up DEAA (Dynamic Energy Allocation Algorithm) technology boosts low frequencies to make the beats hit even harder.

• Wireless Stereo Pairing
  Connect 2 MetaCe Sound speakers via a single device for 360° stereo sound and double the volume.

• Wireless Bluetooth Streaming
  Wirelessly connect up to 2 smartphones or tablets and take turns playing music with exceptional 360° sound.

• More than a Speaker
  It can be used as a handicraft ornament due to its ingenious ceramic design, and can also be used as a night light for a bedside table.

What’s in the box

• 1 x MetaCe BS1
• 1 x Type-C USB cable
• 1 x Storage box
• 1 x User Manual

Specifications

• Bluetooth Specification: V5.1
• Bluetooth Frequency: 2.402-2.48GHz
• Frequency Response Range: 50Hz-20KHz
• Waterproof Level: IPX5
• SNR: ＞85dB
• TWS: Yes
• Operation Range: Up to 10 meters
• Play Time: Up to 12 hours (50%volume, depending on audio content)
• Output Power: 5W(RMS)/10W(Peak)
• Rated Charging Voltage: DC 5.0V
• Battery Type: 1100mAh/3.7V
• Standby Time: Up to 400 hours
• Charging Time: 2.5hours

Product Overview

1. Power on/off

   • Press & Hold
     1-2 seconds Long press the Power button for 2 seconds

   • Press x2/Double Press
     Press x2 Switch light state BLN/Off/On

   • Press x1
     Press x1 Controlling Music Play/Pause

2. Pair with your device

   • Turn on the speaker MetaCe BS1 Long press the Power button for 2 seconds
   • The speaker will automatically enter Bluetooth connection mode, and you will hear a voice prompt
   • Find the speaker MetaCe BS1 on your device and pair it. And you will hear a voice prompt when the connection is successful

3. Pair TWS
   After connecting your device with the first speaker, power on the second speaker. Once both speakers are in True Wireless mode, they will automatically pair with a Bluetooth-enabled device.

When turned on, the speaker will automatically connect to the last connected device if available. Otherwise the speaker will enter pairing mode. Having a connection problem? Remove *MetaCe BS1″ from your device’s BT list and ensure the speaker is within 1 meter from the device. Start pairing process again. For the best sound quality, make sure there is a clear line of sight between the connected device and the speaker.

Charge the speaker

• When the speaker is with low battery, audio notification will be heard.
• Use the included Type-C USB cable to charge the speaker and charge the speaker fully before first use.
• Disconnect your speaker from the charger when fully charged. Do not charge your speaker for extended periods.

Trouble Shooting

•  Make sure you are using the MetaCe original USB cable.

•  Connect the USB cable to a different USB power supply.

•  Connect to a different AC (mains) power source

The speaker won’t pair with mobile device| •  On your mobile device, turn the BT Function off and then on. Remove your speaker from the BT list on your device. Pair your device again
**** No sound| •  On your mobile device, turm the BT function off and then on. Remove your speaker from the BT list on your device. Pair your device again.

•  Increase the volume on your speaker, your device and music source.

Notes

1. Keep the speaker out of the reach of pets and children to prevent it from being damaged.
2. When cleaning the broken speaker, please be careful not to be hurt by ceramic fragments.
3. Please do not expose the speaker to heavy rain or use it in a humid environment for a long time.

FCC

NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part15 of the FCC Rules.Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Warranty Certificate

• MODEL: ………………………………………………………………………..
• DATE OF PURCHASE: ………………………………………………………
• CUSTOMER’S NAME: ………………………………………………………
• CUSTOMER’S PHONE #: ………………………………………………….
• CUSTOMER’S ADDRESS: …………………………………………………
• OFFICIAL DEALER STAMP: ………………………………………………………………………..

Please keep the invoice & this certificate.
Thank you for purchasing our product. We offer 1-year free warranty service from the date of purchase in accordance with the following term & conditions:

1. This certificate must be presented together with invoice for warranty service.
2. Free warranty does not include:
   • Replacement and repair of cabinet and supplied accessories.
   • Damage caused by accident, negligence, abuse or misuse improper power supply.
   • Normal wear & tear or any unauthorized repair or being tampered with.
3. This certificate will be void if altered.

Note: If the ceramic housing of the speaker is damaged within one year from the date of purchase, we will provide a 50% coupon for you to re-purchase on Amazon. You can contact us at the following email address to request the coupon. support@blissaeon.com
If you have any problems with the product, you can also contact us through the email address above.

support@blissaeon.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>