GO-TCHA Classic for Pokemon Go User Guide
- June 8, 2024
- GO-TCHA
Table of Contents
GO-TCHA Classic for Pokemon Go User Guide
Thank you for purchasing the Go-tcha Classic for Pokémon Go!
Enjoy Pokémon GO on the move without looking at your smartphone!
What’s In The Box?
In your Go-tcha Classic for Pokémon Go box you should receive:
- x1 Go-tcha Classic USB device
- x1 Go-tcha wristband
- x1 Go-tcha USB charger cable
Connecting Your Go-tcha
To connect your Go-tcha Classic to the Pokémon App:
- Open the Pokémon GO App
- Touch the Main Menu
- Touch Settings
- Touch ‘Pokémon GO Plus’
- Press the button on the Go-tcha Classic to make it discoverable to the Pokémon Go App
- Touch your ‘Pokémon GO Plus’ under Available Devices list to connect.
Using Your Go-tcha Classic – Manual Catch
- Go-tcha Classic will vibrate and animate the screen to show a new/duplicate Pokémon is near
- Press the Go-tcha Classic button/screen to catch the Pokémon
- Go-tcha Classic will vibrate and animate the screen to show a successful/unsuccessful catch
- Go-tcha Classic will vibrate and animate the screen to show when a Pokéstop is in range
- Press the Go-tcha Classic button to retrieve items from a Pokéstop
- Go-tcha Classic will vibrate and animate the screen to show it has successfully/unsuccessfully collected the items and how many items it has collected
Using Your Go-tcha Classic- Auto Catch
To turn the ‘Auto-catch’ function on, press the Go-tcha Classic button until ‘Auto-catch ON’ is selected.
If you have Auto Catch on:
- Go-tcha Classic will vibrate and animate the screen to show a successful/unsuccessful catch
- Go-tcha Classic will vibrate and animate the screen to show it has successfully/unsuccessfully collected the items and how many items it has collected at a Pokéstop
To turn ‘Auto-catch’ off, press and hold the Go-tcha button until ‘Auto-catch OFF’ is selected.
Charging Your Go-tcha Classic
The Go-tcha Classic charges via a magnetic USB cable. Simply remove the Go- tcha Classic unit from the wrist band, connect the magnetic cable and connect the other end to a USB power source. The cable will only connect one way around – you will feel the magnets indicating the correct orientation as you position the connector. Simply return the Go-tcha Classic to the bracelet when fully charged.
A full charge takes approx. 1 hour and lasts for approx. 12 hours with continuous use. Standby time is approx. 48 hours.
Once connected you can check that your Go-tcha is charging by pressing the screen button. The charging animation will appear to confirm that the Go-tcha is charging. If there is another Go-tcha animation running, then wait for the animation to stop and the screen is blank – now press the screen button to confirm the charging animation is displayed.
Go-tcha Classic Screens
THIS PRODUCT IS NOT SPONSORED, ENDORSED, OR APPROVED BY THE POKÉMON COMPANY OR NIANTIC.
Device requires Bluetooth low-energy compatible smartphone with Pokémon GO app
installed. Compatible with iPhones using iOS Ver. 12 onwards installed.
Compatible with Android devices with 2 GB RAM or more, Bluetooth Smart
(Bluetooth Ver. 4.0 or higher) capability, and Android Ver. 4.4–6.0 installed.
Technical Support
Before contacting Datel’s customer service department, please ensure that you have read through and understood the information in this manual/guide. If you contact support, please ensure that you have information on when and where you purchased this product to hand.
Datel Customer Services Europe
Customers Services, Datel Ltd,
Stafford Road,
Stone,
Staffordshire,
ST15 0DG.
UNITED KINGDOM
Web: https://support.codejunkies.com
© 2021 Datel Ltd. PowerSaves is a trademark of Datel Ltd. Pokémon is a trademark or registered Trademark of the POKÉMON COMPANY. All other trademarks are the property of their respective owners. Go-tcha Classic for Pokémon Go is a 100% unofficial product and is NOT sponsored, endorsed or approved by NINTENDO, nor any games developer or publisher.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>