BESDER A8B WiFi CCTV IP Camera User Guide

BESDER A8B WiFi CCTV IP Camera

APP download

Search and download ” iCS ee”in the app store or scan the QR code below to download

Connect to the power supply

Plz connect camera to the power cable,and turn on the power If you need to storage the video via the local TF card, plz install the TF card first then turn on the power TF card doesn’t support the hot plugging, plz plug and unplug memory card when device is power off)recommend use the cloud storage, safe and con venient , the detailed operation see “step

Register/login

1. Open” iCS ee” app, click “sign up” then use the phone number or mailbox to register account(image 1)
2. Register successfully, enter your phone number or mail number in the login interface, enter the password, login your app.
3. You can also use the wechat, facebook, line or the temporary visit to login app

Camera network configuration wifi configuration

wifi configuration(recommend)

Note:
camera can support 2.4G wifi for the time being, doesn’t support 5Gwifi,plz set the router parameter to 2.4G first before configuring network, during the connection, phone,router and c amera need keep within the 2m distance

1. Phone connect to the wifi network
2. Click the “+”in the upper right corner(image 2)click the ” A dd WiFi camera”(image 3)  according to the device’s voice prompt, followthe app interface guide to enter router’s password(image 4)click ” confirm ” start to configure network(if the device doesn’t appear voice prompt for a lo ng time, you can long press the reset to restore default, then go on to configure network)
3. Enter the search device’s interface, the device is in the connection process, plz wait(image 5)
4. After connecting successfully , interface will prompt to set device’s password and name for your device, after finishing, follow the app interface guide to complete network configuration (image 6,7,8,9)
5. After finishing, device will show in the device’s list, it represent the device is connect ing successfully(image 10)
6. Click it you can view the monitoring image, and do the relevant operation and setting(image 11)

If the wifi configure failed, you can choose the below ways to configure device:

AP mode configure network(android version)

1. Long press reset to restore default
2. Press the camera reset three times to enter the AP mode (most devices will voice prompt “enter the AP mode”).
3. Login the “ iCS ee” app ,click the “+”in the upper right corner, and click more in the upper right corner image 12
4. click “Add camera(AP mode)(image 1 3
5. Enter “choose device’s hotpot” interface, connect the searched device’s hotpot (robot’ hotspot name: r obot_XXXX; o ther device’s hotspot name: camera_XXXX) XXXX)(image 1 4
6. After connecting successfully, interface will show router setting page, choose your wifi, enter wifi’s password to start configure network(image 1 5
7. Interface will show Connect to the router network ”(image 1 6
8. After connecting successfully, follow the app interface guide to complete network configuration.
9. Device will show in the device’s list, which represent device connection successful(image 1 0)0). click it to view the monitoring image, also can do the relevant operation and setting(image 1

AP mode configurate network(ios version)

1. Long press reset to restore default
2. Press the camera reset three times to enter the AP mode (most devices will voice prompt “enter the AP mode”).
3. Login the “iCS ee” app ,click the “+”in the upper right corner click “ A dd camera(AP mode)(image 1 7
4. Click the To set the WiFi ””(image search the wireless network of the mobile phone, select the wireless hotspot of the device, enter the wireless password: 1234567890, then connect device’s wireless hotspot ( robot’ hotspot name: r obot_XXXX; other device’s hotspot na me : c amera_XXXX)
5. Return “ iCS ee”app, enter “router setting” interface(image 1 9 enter wifi account and password, click confirm to start router network configuration.
6. Enter “searching device” interface, wait for connection(image 20
7. After connecting successfully, follow the app interface guide to complete network configuration.
8. Device will show in the device’s list, which represent device connection successful(image 1 0)0). click it to view the monitoring image, also can do the relev ant operation and setting(image 1 1)

Wired network configuration (the device should support wired n etwork connection, that is, the device has a network connection port)

1. Long press reset to restore default
2. Connect your router to camera via network cable
3. Connect phone to your router wif i network
4. Login “ iCS ee” app, click the “+”in the upper righ t corner, and click more in the upper right corner image 21).
5. click “ A dd the camera on same router(image 2 2
6. Enter search device interface, click searched camera to add device(image 2 3 ),d evice will show in the device’s list, which represent device c connect successfully (7 Click it to view the monitoring image, also can do the relevant operation and setting

Hotpot direct connection to configurate network

(no need external network, connect to device’s hotpot directly to configure network ,in this mode, the mobile phone cannot receive messages from the device and use the cloud service)

1. Long press reset to restore default
2. Press the camera Reset three times to enter the AP mode (most devices will voice prompt “enter the AP mode”)
3. Search the wireless network of the mobile phone, select the wireless hotspot of the device, enter the wireless password: 1234567890, then connect device’s w ireless hotspot ( robot’ hotspot name: r obot_XXXX; o ther device’ s hotspot name: c amera_XXXX)
4. Open“ iCS ee”app,via temporary visit mode to add device directly (image
5. Device will show in the device’s list, which represent device connect successful ly (imag e 10). Click it to view the monitoring image, also can do the relevant operation and setting (image

4G/5G device network configuration

If your device is 4G/5G device,plz choose this way to add it
Click the “+”in the upper right corner in the main interface, click “ A dd 4G/5G camera”(image 2 5 scan the QR code in the device t o complete the network configuration(image 2

Add shared device
See this method for devices that need to be Shared by others. Login “ iC S ee” app, click the “+”in the upper right corner in the main interface, click the “ S can the QR code to add the camera ”(image 2 7 ), Scan the QR code of the device shared by others or add the devic e by entering the device serial number(image 2 8 )(the shared de vice need to connect the network and add successful ly in the app)

O pen cloud storage
Click “ C loud”or “ C loud S torage”in the device list(image 29,30 ),follow app interface guide to realize and open the cloud storage

Q&A

• Q: How does the camera store videos?

  • Local TF card storage, maximum support 128G, automatically delete earlier videos after TF card is full, and loop recording;
  •  Cloud storage

• Q: What should you do if you forget the device access password?
  A: After restoring the device to factory settings, reconnect and set a new access password
  Note : The access password involves privacy and security, please treat it with caution.

• Q: What should you do if the camera cannot be connected or it is abnormally offline during use?

  • Check whether the camera power supply and router network are normal
  • Unplug the camera power to restart the camera
  • Restore the camera to the factory settings (press and hold the Reset button for about 6 seconds, until you hear the “Restore factory settings, please do not power off” prompting sound), and then add the device again acco rding to the instructions
  • If the wireless network configuration is unsuccessful, please select wired network or AP network configuration mode.

• Q: Press the device reset button many times, there is no voice prompt for AP mode switching?
  A: The device can only switch the mode once using the reset key, and the switch will not be executed again. It can only be restarted and switched again. Or use the mobile terminal to switch modes.
  Q: AP mode network configuration (the device has been deleted), how to so lve the problem if the device with the same serial number is prompted when adding a device?
  A: Click  Me 】 【 Tool s 】 【 Clear Cache 】 on the APP interface, and re add the device after clearing the cache.

• Q: how to do if dual light camera can’t alarm with dual light?
  A: Open monitor image, click the icon in the lower right corner of the main interface to confirm whether choose the d ual light mode

• Q:how to solve the issue which does not have alarm video?
  A: Click 【 S ettings 】 【 Smart Alarm 】 【 Alarm Action 】 【 Take a Video 】 on the main interface of APP to check whether the box has been checked. 【 Alarm Time 】 Whether the selection is correct.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to pa rt 15 of the FCC Rules. These limits are designed to provide reasonable protectio n against harmful interference in a residential ins tallation. This equipment generates, uses and can radiate radi o frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause h armful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the se paration bet ween the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experi enced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is sub ject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Caution Any changes or modifications not ex pressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) u sed for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co located or operating in conjunction with any other antenna or transmitter. End users and installers must be provide with anten na installation instructions and transmitter operating conditions for satisfying RF exposure com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>