People Technology IP-WLBG-4CH Scanner User Manual
- June 8, 2024
- People Technology
Table of Contents
People Technology IP-WLBG-4CH Scanner
Introduction
Purpose
This document provides basic guidelines for customers who use products
designed by People & Technology.
Range
The scope of this document is to provide software descriptions and general
instructions from IP-WLBG-4CH.
Object
This document is intended for customers using People & Technology’s IP-WLBG-
4CH.
Question
Please contact http://www.pntbiz.co.kr for
technical support and documentation errors.
Component Description
- IP-WLBG-4CH Scanner Body
- Antenna (Removable)
If the component is missing or damaged, contact your place of purchase. Please keep the boxes and packaging materials in case of return.
Hardware Specification
Features/Description
- MCU: ST STM32F722VE ARM® Cortex® -M7 CPU with FPU
- Wi-Fi: TI CC3235S ARM® Cortex® -M4 Core at 80 MHz
- Memory: RAM (Up to 256KB)
- Storage : External S-Flash
- Network: 802.11 a/b/g/n : 2.4GHz and 5GHz
- BLE: Scanner + Peripheral (nRF52832 x 4)
- Antenna BLE: x 4 / Wi-Fi x 1
- Power USB 2.0 Power: ( 5.0 V / 3.0 A)
- HW / SW Version: V 1.0 / V 1.0
Direct current [D.C] symbol
Scanner Install Location
This scanner can be connected to the network anywhere within the range of the wireless network. However, the operating distance of the scanner, the range of wireless connections, may vary significantly depending on the physical arrangement of the scanner. For example, the thickness and number of walls that a wireless signal passes through can limit the scope of the scanner.
- It is recommended to be near the WiFi router.
- Stay away from potentially interfering devices.
- Stay away from solid metal doors or metal surfaces.
- Glass, insulated walls, tanks, mirrors, bricks, and concrete can affect radio signals.
Scanner Installation
- Connect the scanner to the USB DC adapter.
- Check the LEDs on the scanner.
LED Scenario
- Powered On
- WiFi (AP) Connected
- BT Signal Received
- Data Transmitted
How to set up the Scanner
-
Run the settings app provided. After launching the app, click the button in the lower right corner to search for the scanner.
-
Select the scanner you want to set from the list.
-
Enter the PASSWORD you received.
-
Enter PASSWORD and the screen for setting up the scanner will be displayed.
-
Click the Search icon on the right side of SSID to start WiFi scanning.
-
Select the WiFi you want to connect to from the list.
-
Check the selected WiFi SSID.
-
Enter your WiFi password.
-
Check the scanner ID.
-
Enter the server information to which the scanner will send data.
(Default value is WMS server information) -
When the setting is complete, click the ” Save ” button to finish the setup.
FAQ
- Q1. If you USB Scanner not found.
- A1. Turn off the scanner, power it back up, and try connecting it. It can only be accessed within 30 seconds of the initial power supply.
- Q2. If you unable to connect to WiFi SSID.
- A2. Please check your WiFi information and router settings.
- Q3. If you forgot ID and password.
- A3. Please contact the place of purchase or head office.
- Q4. If you want to buy an antenna.
- A4. Please contact the place of purchase or head office.
If you have any questions, please contact
http://www.pntbiz.com
FCC Rules
O FCC Compliance Statement(Part 15.19 (3))
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
O FCC Interference Statement(Part 15.105)
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to correct the interference by one of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
O FCC Caution (Part 15.21)
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment. This
transmitter must not be co‐located or operating in conjunction with any other
antenna or transmitter.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20 cm between the radiator and your body. This transmitter
must not be co‐located or operating in conjunction with any other antenna or
transmitter.
Copyright ⓒ 2018 People & Technology Co., Ltd. All Rights Reserved