KNZ Glow S Bluetooth 5.3 Speaker User Manual
- June 8, 2024
- KNZ
Table of Contents
Glow S Bluetooth 5.3 Speaker
User Manual
PRODUCT ILLUSTRATION
|
---|---
CHARGING
When you open the silicone cover, the USB Type-C charging port is the first to
the left. Use the charging cable included in package. Connect the USB Type-C
end to Glow S speaker, and connect the USB end to USB power source (wall
charger, computer, portable battery, etc.) to charge the speaker. Before
using, make sure the Glow S speaker is fully charged. A solid red LED light
indicates that the speaker is being charged, and it will turn off when the
speaker is fully charged.
POWER ON/OFF
When speaker is off, press and hold the power button for 4 seconds to turn the
power ON. When the speaker is on, press and hold the power button for 3
seconds to turn it OFF. If not connected to any device for a long time, the
speaker will power off automatically to save battery life.
BLUETOOTH MODE
After power on, Glow S speaker goes directly to Bluetooth mode if there is no
external device connected to it, such as microSD card, AUX cable, or USB
driver. If there are external devices connected to it, you will need to press
the Mode (“M”) button to switch to Bluetooth mode.
PAIRING
When Glow S is in Bluetooth mode, turn on the Bluetooth settings of your
phone, tablet or other Bluetooth enabled device, and search for Bluetooth
devices. Locate “KNZ Glow S” and connect to it. Once successfully paired,
there will be a tone indicating Bluetooth connection is set up and ready to
use.
PAIRING TWO GLOW S SPEAKERS
The true wireless capability of Glow S speaker support two such speakers to be
connected as a stereo pair. To pair two Glow S speakers, follow below
instructions:
- Power on both speakers, and make sure they are both not connected to any other Bluetooth devices.
- Press and hold the Mode (“M”) Button on one speaker, and you will hear a tone from both speakers when they are successfully connected.
- Find “KNZ Glow S” in your phone’s Bluetooth settings list and connect to it.
HANDS FREE PHONE CALL
To disconnect the two paired speakers, press and hold the Mode (“M”) Button
and it disconnects the two linked speakers.
- Press the Power Button to answer an incoming phone call.
- Press and hold the Power Button for 2 seconds to reject an incoming phone call.
MUSIC PLAY
- Select a song or playlist on your Bluetooth enabled device, Press Power Button to play. Press Power Button again to PAUSE listening.
- Short press the “+” Button to switch to the last song or the beginning of the current song. Short press the “-” button to switch to the next song.
VOLUME CONTROL
Long press the “+” Button to tune up volume. Long press the “-” Button to tune
down volume.
MICROSD/USB/AUX MODES
- Insert MicroSD card into the card slot on back of the speaker. Press the “M” button to switch to microSD mode to play.
- Plug USB drive to the USB port on back of the speaker, and press “M” button to switch to USB mode to play.
- Use the included AUX cable, connect one end to the AUX port on back of the speaker, and connect the other end to AUX supported phone, tablet or computer, then press “M” button to switch to AUX mode to play.
CHANGE THE LIGHT SHOW PATTERN
Press the Light Mode button to change the pattern of the light show. The last
mode in the loop turns lights off. You can keep lights off to get extended
battery life.
PRODUCT SPECIFICATIONS
Product Dimension: 8″x3.5″x3.5″
Product Weight: 1.4 lbs
Battery Type: Rechargeable Lithium polymer battery
Charging Time: 2∼3 hours
Music Play Time with Light Show: 6 hours (medium volume);
Music Play Time with Light Off: Up to 10 hours
Bluetooth Version: v5.3
Wireless Range: 33 ft
Speaker Output: 10W
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer-ence to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. For
further inquiries please visit
www.knztech.com/support.
WARRENTY
KNZ Technology LLC. warrants this product as free of defects in material,
design, and workmanship for the period of one year from the original date of
purchase. The warranty is limited to the original purchaser. If during the
period of warranty this product proves defective under normal use and service,
you should return the product to the retailer from whom it was purchased or to
an authorized warranty center. The liability of KNZ Technology LLC. and its
appointed repair company is limited to the cost of repair and/or replacement
of the product under warranty. Products sent for warranty service must be
accompanied by a copy of the original purchase receipt, the original box,
materials, and accessories. All cost associated with the return of the product
under warranty are the responsibility of the original purchaser. Shipping and
Handing Fee will apply in order for KNZ Technology LLC. to ship out a
new/refurbished product to a customer. KNZ Technology LLC. will not assume any
responsibility for any loss or damage occurred in shipping.
KNZ is registered trademark of KNZ Technology LLC. All other trademarks are
the property of their respective owners. Copyright 2021. All rights reserved.
This product is not a toy. Contains small parts, not for children under 3
years.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>