EBAKIN Y91 Heart Rate Smart Bracelet Instructions

EBAKIN Y91 Heart Rate Smart Bracelet

Thank you for purchasing our bracelet.
Please read the manual carefully before using it .

Settings

Use H Band APP on your iOS or Android smartphone (No I pad or Computers) as follows.
Note: The hardware and system of your phone shall meet the following requirements.

1OS 8.0 or above

|

Android 4.0 or above

---|---
|

Search and download H Band APP

1. Search and download H Band APP from the Apple Store, 91 Assistant, 360 Mobile Assistant or other app stores.
2. Scan the QR code. It probably has a problem to open the link by scan tools of your cell phone, please copy the link and open it through browsers.
   |
   ---|---

Product activation and installation

The product must be activated by charging before initial use, and then charge the product to ensure normal power supply. The hand ring will automatically power on.

How to charge?

• Rotate at 45 degrees, remove the strap

• Take apart the watchband,  and one end of the inside with the charging Symbol is the usb charging port

• The end of the usb chip is inserted into the usb charging tank

• Switch one the power and start charging

Connect the bracelet

Open Bluetooth and H Band APP, click connection, select Y91 to connect, please choose to allow access location info. When the tracker is connected successfully, the sign on the upper left corner of it is displayed like this:

Notes while connecting:

1. Bluetooth is turned on
2. Sufficient power in the bracelet
3. Keep your cell phone and bracelet within 50cm when connecting
4. If your phone can’t find the bracelet in the APP, please open all permissions of H Band software in your phone settings.

Common Questions:

The equipment could not be found when connecting?

1. Ensure that the Bluetooth of the smartphone is on, the smartphone operating system should be Android 4.4 and above, or 10S 8.0 and above.
2. Ensure that the distance between the phone and the device is less than 0.5 meters. After connection, the device should be kept in a valid range ( normally less than 10 meters).
3. Ensure that the equipment is not being recharged. If you still have problems after charging, please be free contact us.

Occasional Bluetooth connection failed?

1. The Bluetooth service has an exception after the phone restarted.
2. Restart the phone or the Bluetooth service, then it can connect properly.

Appearance Introduction

Names of different parts

Functions introduction

Interface

Note: Interfaces of finding the phone, stopwatch, and countdown are closed by default, which will be displayed on the bracelet after turning them on in the APP settings- My device-Switch setting.

Setting the interface

Make sure the bracelet and APP are connected. Enter APP, click Settings – Main interface style settings – select the corresponding style. It can be checked on the screen of the tracker.

Turn on/turn off

Turn on: On power, touch the screen and hold for about 4 seconds, enter the main interface; Touch the button and hold for 4 seconds, enter Bluetooth address and software version interface.
Off power: Switch to the shutdown interface and touch the screen for 4 seconds.

Sport mode

1. Press the sport mode option for 4 seconds for you to enter into sport mode .
   There are 10 sports modes in total
   
   a. You can click the touch key to choose your sport mode
   b. Press and hold the touch key for 2 seconds to enter your sport mode

2. Exit sport mode
   Switch to interface of the photo 1
   Click the touch button, enter the interface of the photo 2
   Then click he touch button for 4 seconds, Yan can exit sport mode.| |
   ---|---|---

3. Data saving
   a. If the sports last less then 1 minute, the user will be reminded of unsuccessfully saving the data.

b. The screen would return automatically to the main interface within 4 seconds but Sport mode will work in the background

Steps, calorie, mileage

Heart rate testing

Enter heart rate interface, the bracelet would test automatically. In the beginning, the data would fluctuate, but it will gradually stabilize. After the test, it would show the result. If your heart rate can’t be detected, the screen would show in this way,—/—. If there is no operation, the screen would be closed after 60s
(No matter whether the heart rate is detected or not)
• APP Testing Mode

• Heart Rate Data Panel
  

Heart rate monitoring

1. As long as you wear the bracelet, it will automatically detect your heart rate, steps and calories, and sync to APP.
2. Automatic heart rate monitoring is on as default and it automatically detects every 30 minutes/ If you want to turn it off, please set it in the app: Settings -Y91- Switch setting – HR automatic monitoring-turn off
3. To monitor your heart rate more accurately, please keep it a bit tighter than usual when you are taking exercise.

ECG

1. While doing ECG detection, make sure wear bracelet on the left wrist meanwhile put your finger on the right hand on the front side of the electrode plate, the ECG chip in the bracelet could collect biological signal from the heart
2. While doing ECG detection, make sure the electrode plate on the bottom of the bracelet touch your wrist skin well, and put your finger on electrode plate covering as much area as possible
3. Keep quiet and don’t remove your finger from electrode plate
4. If user’s skin is too dry, it’s suggested to apply electric conduction gel/ lotion or hot towel dressing for a while, then do ECG detection,

Blood Oxygen

While detecting blood oxygen, due to the signal weak on the wrist position, if couldn’t show the result while wearing, it’s suggested to take off the wristband, keep your finger pulp touch tightly the sensor on the bottom to test.

keep your finger pulp touch tightly the sensor on the bottom to test

Sleep monitoring

Enter the sleep monitoring interface, which shows the total sleep time of the previous day. This function works automatically. Generally, you can know the data 10-30 minutes later after getting up

Looking for a cell phone

Keep the H Band working in the background on your phone, if you switch the Interface to the searching mode and hold for 4 seconds, and the phone connected to the watch would ring and vibrate.

Stopwatch

Turn on the stopwatch in the APP, then turn to the stopwatch interface by pressing the screen and holding for 4 seconds.

Countdown

Turn on the countdown in the APP and choose a time period, after pressing OK, the bracelet would automatically display the countdown. Press and hold for 3 seconds, it would be turned off.

Information reminder

Turn on APP- Settings-My device-Message alert, turn on or turn off the alert. If you want to display the messages, please set in the corresponding APP.

Call reminder

After setting up a call reminder, the bracelet would continually vibrate when someone calls in. You can make it mute by short touch and reject to pick by long touch.

Alarm clock

In the APP, you can set alarms and choose the right icon. The maximum of alarms is 20.

Motion alert- remember to move

Set a reminding time in the APP, if it’s the time, the tracker would alert.

Heart rate alert

The bracelet automatically detects heart rates, lf the data reaches  the warning number or higher than that, the bracelet would automatically remind you, the default reminder value of heart rates is 115, and you can set a new one according to your situation.

Remote control to camera of smart phone

Connect the bracelet and open the APP, click Y91, take a photo, enter the camera interface, and the wrist screen automatically turns on. Then you can click the bracelet to take photos.

Wearing test

When the switch in the APP is turned on, your wrist would be tested in the wearing process to avoid wearing miscarriage.

Female physiological period

The female function is only used for female users. It would be turned on when setting the profile as a female in the APP Set the data after turning on, that is, only record menstrual period, pregnant period, treasure mother period, then enter the secondary period and select your own basic information.

Data modification

Battery icon status description

• Low power

• Charging

About the Waterproof

1. The waterproof grade of the bracelet is IP68, which means that protection against dust inhalation; protection for short immersion.
2. The activity scenes it allows are as follows: wear it in a rainy day and wash faces and hands, wear it for swimming and up to 3 meters diving.
3. Please do not wear a bracelet to swim in the sea or take a hot shower.

Product parameters

This device complies with A Part 15 of the FCC Rules. The operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver:
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning

Improper use, such as replacing batteries would cause the risk of explosion! Please dispose of used batteries properly.

Used batteries must not be treated with residual waste and must be disposed of separately. Dealing with the used batteries at common sites personally is free. The owner of the old battery is responsible for carrying these batteries to the sites or similar places.
You will help to recycle valuable raw materials and toxic substances through this little personal effort.

Q: Received this fitness tracker watch but it’s only giving me time in digital, how do you get round old style clock face’
A: Please connect the tracker with your phone, open the APP(H Band) and then choose: Settings – My deviceY97 – More – Settings of main interface style – Style 2.
Q: How to get the automatic blood pressure monitorer?
A: Settings – My deviceY97 – More – Switch setting – BP automatic monitoring
Also you can switch on the Bp private mode, set your personal-tailored BP mode to obtain more accurate data.

Warm Tip:

You can get more information on APP(H Band), just open the APP, connect the tracker with your phone, scroll down on the Dashboard, look more data history about your Sport, Sleep, Heart rate and Blood pressure. Also can set your tracker by choose: Settings – My device Y91 –

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>