FERNOX TF1 Omega Filter Instructions
- June 8, 2024
- FERNOX
Table of Contents
FERNOX TF1 Omega Filter
INTRODUCTION
Designed for installation in small or restricted access areas, this high- performance, easy to clean system filter uses Hydronic Particle Separation and magnetic filtration to remove contaminants from central heating system water.
- High capacity and compact design
- Ideal for use in restricted spaces and access areas
- Easy to install – fits on horizontal and vertical pipework in both flow directions. The filter can operate at an angle of 45°
- Fast and easy to clean without dismantling the unit
- Unique action, removes magnetic and non-magnetic contaminants from system water
- High quality valves are included
- Will not block or restrict flow
- Smart, tough, forged brass construction (no hidden porosity) with nickel plating
- Unique manifold with double radial seals and multiple orientation capability
- Powerful neodymium magnet assembly with threaded magnet cap
- As with all magnetic products, if you have an implanted cardiac device extra caution should be taken at all times when handling any magnetic filter
- Available as 22mm and 28mm products
Product Specifications
- Maximum operating temperature: 100°C
- Maximum operating pressure: 10 bar
- Maximum flow rate: 50 L/min
- Magnetic characteristics: Powerful neodymium magnetic assembly
- Drain valve characteristics: Easy to install with multiple orientation capability
- Filter material: Tough, forged brass construction with nickel plating. Compatible with EN 12165-CW617N-M
Weight
- TF1 Omega Filter 22mm 2400g (with magnet and drain valve)
- TF1 Omega Filter 28mm 2642g (with magnet and drain valve)
DIMENSION
TF1 Omega Filter 22mm
TF1 Omega Filter 28mm
Cleaning Guide
- Switch off the boiler.
- Close the inlet/ outlet valves. Remove the drain valve cap.
- Open the drain valve.
- Remove the magnet. Slowly open the inlet valve to control the flow. Flush out the filter until the water runs clear.
- Close the inlet valve. Close the drain valve.
- Replace the drain valve cap. Reinsert the magnet.
- Open the inlet/ outlet valves.
- Restart the boiler.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>