perixx PERIMICE-508 Wired Ergonomic Vertical Mouse User Manual
- June 8, 2024
- Perixx
Table of Contents
perixx PERIMICE-508 Wired Ergonomic Vertical Mouse
Product Illustration
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE 1:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
NOTE 2:
Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Caution
- The manufacturer and re-resellers are not responsible for any technical malfunctions, damage, or personal injury incurred by:
- Any attempt to dismantle, change or modify the product in any manner
- Malfunction or damage is due to misuse or improper alteration or repair.
- Malfunctions or damage caused by external influences such as falling
- Malfunctions or damage is caused by fire, salt, gas, earthquake, lightning, wind, water, or other natural calamities, or abnormal voltage.
- Malfunction or damage is caused by other devices connected to the products.
- Malfunctions or damage is caused by high temperature, and humid, greasy, dusty, and hazardous environments.
- You are cautioned that changes or modifications not expressly approved by Perixx Computer GmbH could void your authority to operate the equipment.
- All brand names, trademarks, and logos are the properties of their respective owners.
Please Note : Long-term repetitive use of any keyboard and mouse could cause injury to the user. Perixx recommends users avoid excessive use of this or any keyboard and mouse.
Important Safety Instructions:
- Avoid dropping.
- Do not disassemble.
- This product is suitable for moderate climates only.
- The maximum ambient temperature during use of this product must not exceed 40 degree
- Open flame sources, such as candles, must not be placed on this product.
- Only use a dry cloth or brush to clean this product.
- Perixx offers a one-year limited warranty with an optional one-year extension.
Specification
- Interface USB Type-A
- Size 124 68*6mm
- Weight 159g
- Cable length 1800mm
- Material ABS
- Operating system Win 7 or later requirements
- Number of buttons 6
- DPI 1000(L)/1600(H)
- Tracking speed 251PS
- Report rate 125Hz
- Durability 5 million keypresses
PERIMICE-508 Programmable Driver Settngs
Please download and install PERIMICE-508 programmable driver from our website.
(https://eu.perixx.com/pages/download-driver)
After the installation, you can start the setting by clicking the icon.
Main Control
There are 5 buttons which can be set up.
- In section A STANDARD BUTTON ASSIGNMENT, you can assign standard functions to 5 buttons with the drop-down list options.
- In section B GAME PROFILES, you can create, save and load your own settings for up to 5 profiles. You can also edit the existing profiles by clicking EDIT PROFILE.
- In sectionC DOUBLE CLICK, speed can be adjusted based on your needs.
- After the settings, please press APPLY to save the settings. Then you can press OK to close the window or CANCEL to discard the settings.
- For more information, please visit our website. https://eu.perix.com/pages/user-manual
- All buttons on PERIMICE-508 are programmable with the following functions: Click, Assign Macro, Multimedia, Windows, Menu, Wheel click…etc.
- The following pages will introduce how you can set up Macro, Multimedia and Windows function
Macro Manager
- You can create a new Macro setting by pressing the NEW button. Then you can enter the Macro name in A and press ENTER key on the keyboard to save.
- Start to record the Key Press Sequence by clicking B START RECORD button and stop the recording by pressing the button again.
- Your Keypress Sequence will be recorded in the middle column C and you can decide the D LOOP TIMES repetition rate as well.
- Afer the selection, please press OK to save the setting or CANCEL to discard the setting and leave from the program.
- Once the Macro is recorded, you can simply press DELETE to abandon the setting.
The Multimedia and Windows sub menus can provide more options in multimedia
and office settings.
Advanced Control
- In A, you are allowed to choose your favorite settings for VERTICAL SCROLL SPEED (Mouse Wheel), POINTER SPEED and POINTER VISIBILITY.
- You can also restore the factory settings in B by selecting RESET
- After the settings, please press APPLY to save the settings. Then you can press OK to close the window or CANCEL to discard the settings.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>