CASIO 3517 Stainless Steel Casual Watch User Guide
- June 8, 2024
- Casio
Table of Contents
CASIO 3517 Stainless Steel Casual Watch
You can also find information about operational procedures at the CASIO website. https://support.casio.com/global/en/wat/model/3517/
About This Manual
- Button operations are indicated using the letters shown in the illustration.
- Each section of this manual provides you with the information you need to perform operations in each mode.
Procedure Lookup
The following is a handy reference list of all the operational procedures
contained in this manual.
Watch Features
- Timer
- Stopwatch
- Alarm
- Dual Time
You can also find information about operational procedures at the CASIO website.
https://support.casio.com/global/en/wat/model/3517/
Configuring Time and Date Settings
To set the time and date
- Hold down A while in the Timekeeping Mode until the seconds digits flash on the display because they are selected.
- Press C to change the selection in the following sequence.
- While the seconds digits are selected (flashing), press D to reset the seconds to 00. If you press D while the seconds count is in the range of 30 to 59, the seconds are reset to 00 and 1 is added to the minutes. If the seconds count is in the range of 00 to 29, the minutes count is unchanged.
- While any other digits (beside seconds) are selected (flashing), press D to increase the number or B to decrease it. While the 12/24-hour format setting is selected, press B or D to toggle it between 12 and 24.
- Except for when adjusting the seconds or setting the 12/24-hour format, holding down a button changes the current selection at high speed.
- When the 12-hour format is selected, the indicator P appears on the display to indicate “P.M.” times. There is no indicator for “A.M.” times.
- The year can be set in the range of 2000 to 2099.
- The watch’s built-in full automatic calendar makes allowances for different month lengths and leap years. Once you set the date, there should be no reason to change it except after you have the watch’s battery replaced.
- The day of the week is displayed automatically in accordance with the date (year, month, and day) settings.
- After you set the time and date, press A to return to the Timekeeping Mode.
Selecting a Mode
- Press C to change from mode to mode.
- If you do not press any button for a few minutes while making settings in any mode (indicated when settings are flashing), the watch automatically clears the setting screen (settings stop flashing) and returns to the normal display for the mode you are in.
- In any mode, hold down C for at least two seconds to return to the Timekeeping Mode.
- In any mode press L to illuminate the display.
You can also find information about operational procedures at the CASIO website. https://support.casio.com/global/en/wat/model/3517/
Timer Mode
The countdown timer can be set within a range of 1 second to 24 hours. When the countdown reaches zero, an alarm sounds for 10 seconds or until you press any button.
To set the countdown start time
- Hold down A while in the Timer Mode. The hours digits flash on the display because they are selected.
- Press C to change the selection in the following sequence.
To switch auto repeat timing and the progress beeper on and off
- Hold down A while in the Timer Mode. The hour digits flash on the display because they are selected. Press A again to move the flashing to the auto repeat ON/OFF setting.
- Press B or D to toggle auto repeat on ( ) and off.
- Press C to move the flashing to the progress beeper ON/OFF setting.
- Press B or D to toggle the progress beeper on ( ) and off.
- Press A to return to the Timer Mode.
- When the end of the countdown is reached while auto repeat is on, the alarm sounds, but the countdown restarts from the beginning without stopping. You can stop the countdown by pressing D and manually reset to the start time by pressing B.
- If you set a starting time of 10 seconds or less and have Auto Repeat turned on, the countdown timer tone (which normally sounds for 10 seconds) sounds for only one second.
- When the progress beeper is turned on, the watch beeps as the countdown time passes the 10, 5, 4, 3, 2, and 1-minute marks, and the 50, 40, 30, 20, 10, 5, 4, 3, 2, and 1-second marks.
Stopwatch Mode
The Stopwatch Mode lets you measure elapsed time, split times, and two
finishes. The range of the stopwatch is 23 hour, 59 minutes, 59.99 seconds.
You can also have an alarm sound when a target time is reached. The Stopwatch
Mode also features an Auto-Start function.
About the Auto-Start function
With the Auto-Start function, the watch performs a 5-second countdown. When
the countdown reaches zero, stopwatch operation starts automatically. During
the final three seconds of the countdown, a beeper sounds with each second.
To turn the Auto-Start function on and off
While the display is showing all zeros in the Stopwatch Mode, press B to
toggle it on and off.
- The indicator A.START appears and 05 is shown in the upper display while Auto- Start is turned on. The A.START indicator is not shown and the upper part of the display shows the current time when Auto-Start is turned off.
About the Target Time function
With the Target Time function, an alarm sounds for ten seconds whenever the
time being kept by the stopwatch reaches a target time you have preset.
To set the Target Time and to turn it on and off
- While the display is showing all zeros in the Stopwatch Mode, hold down A, and the hour digit of the target time starts to flash because it is selected.
- Press C to change the selection in the following sequence.
- Press D to increase the selected number or B to decrease it. Holding down either button changes the selection at high speed.
- Press B and D at the same time to clear the setting to 0:00′ 00″.
- Press A to move the flashing to the target time ON/OFF setting.
- Press B or D to toggle the target time on and off.
- Press A to return to the Stopwatch Mode.
Important!
The alarm will not sound if you do not turn on the target time.
- Press A, C or L to stop the alarm after it starts to sound.
Alarm Mode
When the Daily Alarm is switched on, the alarm sounds for 20 seconds at the preset time each day. Press any button to stop the alarm after it starts to sound. When the Hourly Time Signal is on, the watch beeps every hour on the hour.
To set the alarm time
- Hold down A until the hour digits start to flash on the display. The hour digits flash because they are selected.
- This operation will switch the Daily Alarm on automatically.
- Press C to change the selection in the following sequence.
- Press D to increase the selected digits and B to decrease them. Holding down either button changes the selection at high speed.
- The format (12-hour and 24-hour) of the alarm time matches the format you select for regular timekeeping.
- When setting the alarm time using the 12-hour format, take care to set the time correctly as morning (no indicator) or afternoon (P).
- After you set the alarm time, press A to return to the Alarm Mode.
To turn the daily alarm and hourly time signal on and off
Press B while in the Alarm Mode to change the status of the daily alarm and
hourly time signal in the following sequence.
- The alarm on indicator ( ) and the Hourly Time Signal on indicator ( ) are shown on the display in all modes while these functions are turned on.
To test the alarm sound
Hold down B while in the Alarm Mode to sound the alarm.
- Note that pressing B also changes the alarm and the hourly time signal ON/OFF settings.
Dual Time Mode
The Dual Time Mode lets you keep track of the time in another time zone. You can also select the timekeeping format (12-hour or 24-hour) separately from the Timekeeping Mode.
To set the Dual Time
- Hold down A while in the Dual Time Mode. The hour digits flash on the display because they are selected.
- Press C to change the selection in the following sequence.
- Press D to increase the selected digits and B to decrease them. Holding down either button changes the selection at high speed.
- After you set the time, press A to return to the Dual Time Mode.
- In the Dual Time Mode, the seconds count is synchronized with the seconds count of the Timekeeping Mode.
- In the Dual Time Mode, press B to toggle between the 12-hour and 24-hour formats.
Illumination
The face of the watch is illuminated for easy reading in the dark.
To turn on illumination
In any mode (except when a setting mode, with flashing digits is on the
display), press L to illuminate the display.
Illumination Precautions
- Illumination may be hard to see when viewed under direct sunlight.
- Illumination turns off automatically whenever an alarm sounds.
- Frequent use of illumination runs down the battery.
Specifications
- Accuracy at normal temperature: ±30 seconds a month
- Timekeeping: Hour, minute, second, pm (P), day of the week, month, day
- Time format: 12-hour and 24-hour formats
- Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099
Timer
- Measuring unit: 1/10 second
- Input range: 1 second to 24 hours
- Others: Auto repeat function, progress beeper function
Stopwatch
- Measuring unit: 1/100 second
- Measuring capacity: 23 hours 59 minutes, 59.99 seconds
- Measuring modes: Elapsed time, split time and two finishes Others: Target Time Alarm, Auto-Start
- Alarm: Daily alarm, hourly time signal
Dual Time
- Illumination: LED (light-emitting diode)
- Battery: One lithium battery (Type: CR2025)
- Battery life: 10 years under the following conditions
- One 2-second light operation per day
- One 20-second alarm operation per day
Specifications are subject to change without notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>