GAGGENAU VI 422 613 15 Inch Stainless Induction Cooktop Instruction Manual
- September 3, 2022
- Gaggenau
Table of Contents
VI 422 613 15 Inch Stainless Induction Cooktop
Instruction Manual
VI 422 613 15 Inch Stainless Induction Cooktop
VI 422 613
Stainless steel frame Black glass-ceramic Width 15″ (38 cm)
Installation accessories
In combination with several Vario cooktops, connecting strips must be used.
Choose the respective VA 420 strip from one of the below, depending on type of
installation.
VA 420 000
Connection strip for combination with other Vario 400 series for flush
mounting.
VA 420 010
Connection strip for combination with other Vario 400 series for surface
mounting.
Optional accessories
GP 900 001
Stainless steel frying pan Non-stick cooking, ø 6″.
GP 900 002
Stainless steel frying sensor pan Non-stick coating, ø 7″.
GP 900 003
Stainless steel frying pan Non-stick coating, ø 8″.
Combinable with:
VL414712 AL400721 AI442720 / AI442760 AW442720 / AW442760 AF210791
Good to know:
Wall installations require the hood to be as large as the cooktop(s). Island
installations require the hood to be larger than the cooktop(s).
Vario 400 series flex induction cooktop
VI 422
- Free positioning of cookware inside combined cooking areas
- Frying sensor function for temperature control in pans
- Easy control of all functions with bi-colored display
- Solid stainless steel control knobs Precision crafted ” stainless steel frame
- For surface-mount installation with a visible edge or for flush installation
- Can be perfectly combined with other Vario 400 series appliances
Cooking zones
2 flex induction cooking areas. Small area: 7 ½” x 9″
(2200 W, with booster 3700 W), Large area: 15″ x 9″
(3300 W, with booster 3700 W).
Operation
Control knobs with illuminated ring, cooking zone, and output level markings.
Electronic power control in 17 output levels.
User-friendly control with bi-colored display (white / orange).
Features
Flex function for rectangular cooking areas.
Frying sensor function.
Booster function.
Stopwatch.
Short-term timer.
Options menu.
Power management.
Cooktop-based ventilation control when paired with VL 414 712 downdraft.
Home network integration for digital services (Home Connect) wireless via
WiFi.
The use of the Home
Connect functionality depends on the Home Connect services, which are not
available in every country. For further information please check: home-
connect.com.
Safety
Operation indicator.
Pot detection.
Digital 2-stage residual heat indicator
Safety shut-off.
Planning notes
Planning notes
Depending on the type of installation (surface-mounted or flush-mounted), the
specific location of the cut-out and the knob positions may vary.
The drawing “Installation of the control knob” must be observed if the panel
is more than 1″ thick (there must be a recess at the rear).
If combining several Vario 400 series appliances, a connection strip VA 420
must be placed between the appliances.
Depending on the type of installation, the corresponding connection strip must
be provided.
The weight-bearing capacity and stability, in the case of thin countertops in
particular, must be supported using suitable substructures.
Taking into account the appliance weight and additional loads.
Additional instructions for flush mounting:
Installation is possible in countertops made of stone, synthetics, or solid
wood.
Heat resistant and watertight sealing of the cut edges must be observed.
For a suitable heat-resistant filler please consult the countertops
manufacturer.
The groove must be continuous and even so that uniform placing of the
appliance on the gasket is ensured.
Do not use discontinuous lining.
The joint width may vary due to the size tolerances of the combinations and of
the countertop cut-out.
If installing several Vario products in individual cut-outs allow for a
minimum distance of 2″ between the cooktops.
Operates with magnetic (induction) iron pots and pans only
For optimal heat distribution, the use of flat bottom cookware is recommended.
Immersion depth 2 ” 2 ¾” depending on the type of installation.
To ensure that the appliance works correctly, the cooktop must be sufficiently
ventilated either from the rear or base of the cabinet.
Please see the installation instructions for further detail.
The appliance can be snapped into the countertop from above.
Appliance weight: approx. 22 lbs.
If installing several appliances in individual cut-outs allow for a division
bar of a minimum 1 ³¹/” (50 mm) between the individual cut-outs.
“Operates with magnetic (induction) iron pots and pans only.
For an optimal heat distribution, the use of flat bottom cookware is
recommended.”
The appliance can be snapped into the countertop from above.
Appliance weight: approx. 22 lbs.
Rating
Rating: 3,120 W (208 / 220 V) 3,600 W (240 V)
Minimum fuse protection: 15 A
Electrical: 208 / 220240 V / 60 Hz
Electrical connection: Hardwire required, 59″ cable length.
Surface-mount Installation
Installation of the control knob
Flush-mount Installation
A: ⅛” (3.5-0.5 ) measurements in inches (mm)
Longitudinal section
Cross-section
Measurements in inches (mm)
Numbers indicated inside parenthesis ( ) = mm
www.gaggenau.com/us
Revised: January 2022