Huastlink Z2101 Wireless Router Installation Guide
- June 4, 2024
- Huastlink
Table of Contents
Huastlink
Wireless Router Installation Guide
Login management page
Open the browser, then enter the default IP address “http://192.168.1.1 or
the domain name http://router.epplink.net“, and enter the default password
“admin” to log In to the management page. (It is recommended to use Goalie,
Firefox, Safari browser), or scan the following QR code through WeChat to
enter the management page.
Note: when logging in with a domain name, the IP and DSN of the login
computer must be set to automatically obtain
Configure Internet access
WAN setting
After logging In, select ‘Network” →”WAN’ to set the Internet access mode.
There are three Internet access modes: “automatic access /PPPoE/ fixed IP”.
Please choose the correct Internet access mode according to the requirements
of broadband operators.
Automatic access to the Internet (default)
Select “Auto Get” and then the device will automatically get the IP address
from an ISP (Network server provider). Select this connection method when your
ISP does not provide arty IP network parameters.
PPPoE dial-up
Select “PPP of the dial’ and enter the account password provided by the
operator. After saving, the account can be dialed automatically. After dialing
successfully, the assigned IP address can be obtained for Internet access.
Fixed IP Internet access
Select the “fixed IV, then input the IP/subnet mask/gateway provided by the
operator, then after saving.
Reminding:
The device supports a WAN port. If the WAN port has no access line or the WAN
port b interrupted. If APN cannot be accessed from the external network. the
device will be returned repeatedly. ‘Advanced Sump ‘Execution Action’ in
‘Network Watchdog’ should be changed to ‘No action.
Set the wireless password
Is not set by default. It Is recommended to change the wireless password for
your network security.
Select ‘Wireless Settings’ 4 “2.4g” to enable the wireless network, set the
wireless name, set the encryption mode lit is recommended to u<e
WPAWAESIenentntion made) and the wireless password (to set the password,
select “2.4g Advanced Option” and the password should be at least 8 diffs),
and click save.
Change the system administration password
Click the icon to bring up a dialog box. Select the Change Administrator
Password option to pop up the password service dialog box to make changes.
Enter a new password and click ‘Ok” to automatically Jump to the login interface. Enter a new password to log in.
Cloud Login
Cloud login can log In to the local setting page through the firewall, which Is mainly used for remote management, remote assistance and so on. II The cloud login function is turned off by default. If this function needs to be enabled, the “Select Service and Application” ‘Cloud Login’ interface enables the cloud login, and the cloud login address will be generated after it is enabled, as shown in the figure below: (http://78a35133333058b9d9.os.ac- rink.com:81) , Enter this url In your browser to log In remotely to the management device.
|
---|---
FAQ
What is the default Web IP address and default password? The router’s
default IP address is 192.1681.1, and the default password is ADMIN.
How do I restore the router to factory Settings? When the system is
running normally, hold the router’s Reset button with a spike for about eight
seconds and wait for the device to restart To complete.
What to do if I forget my router admin password? The router’s default
administrative password is ADMIN. Try logging in with the default password. If
the default password is not available, please restore factory Settings before
using the default password to log in.
Why plug in the external network cable to complete the quick setup, but still
be unable to access the Internet? Replug and unplug the network cable
connected to the external network port, and turn off and restart the GPON
/ADSL modem/home gateway for 10 minutes, then try again later. Verify that the
user name and password if are correct, and confirm the account number,
password, and payment to the network operator customer service.
Product Warranty
The following conditions are not covered by the warranty replacement, please note:
- Unauthorized repair, unauthorized disassembly
- Product failure or damage caused by failure to Install, use, maintain, or store in accordance with the instruction manual.
- Artificially injecting or tearing, altering the serial number of the product.
- Has exceeded the warranty, warranty period.
- External factors or human behavior lead to product damage, such as Input inappropriate voltage, high temperature, liquid, mechanical damage,broken, severely oxidized or rusted, etc.
- Customer damage caused by transportation during the repair process.
- Failure or damage caused by force majeure (such as fire, earthquake, etc.) or natural disasters (such as lightning strikes).
- Other failures or damages caused by problems other than product design, technology, manufacturing, q
quality, etc.
This device complies with pan 150i the MX: Rules. Operation is subject to the
following two ( I ) This device may not awe harmful interference. and (2) dip
device mint accept any interter. received. including emergence that may cause
undesired operation.
Warranty description
- The product warranty time is 1 year, the warranty method Is for customer service, warranty replacement is limited to this machine, packaging, software production Product
- The power adapter has a warranty period of 1 year, such as the power adapter has obvious hard object damage, cracks, broken feet, serious deformation, damage to the power cord, disconnection, and bare core are not guaranteed, and users can purchase It Themselves
- The repaired machine, if it is under the warranty period, will continue to enjoy the warranty service; if it is less than 3 months from the end of the warranty period,the replaced product has a 3-month warranty from the date of replacement.
- The mailing fee for the returned product is the one-way responsibility of the sender. User stub In order to protect your rights and interests. please fill In carefully and keep it as a voucher for maintenance.
User stud
User Information:…………………..
Contact address:…………………….
Contact number:…………………..
E-mail:……………………………….
Product certification
Model number:……….
QC:………………………
date:…………………..
Note: The final interpretation right of this manual belongs to our
company. There are product changes, which are subject to the actual product
without prior notice! Any Changes or modifications not expressly approved by
the party responsible for compllancecouldvoid the user’s authority to operate
the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device. pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference nice in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the Instructions, may cause harmful interference to radio
communic aCarti however, there Is no guarantee that Interference Will not
occur In a particular instillation. If this quip ent does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user Is encouraged to try to correct the
interference by one or more of the folk:ming measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which thereceiwr is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with R radiation exposure limits set forth fur an uncontrolled environment. This equipment should be instead and operated with a minimum distance of 20,:m between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>