AoKe A50 Pro Earbuds User Guide
- June 8, 2024
- AOKE
Table of Contents
AoKe A50 Pro Earbuds
Table of Product Contents
-
Charging Case*1
-
Charging Case*2
-
Type-C Charging Cable*1
-
Instruction Book
-
Earbud Tip*4
Product Specification
| Bluetooth Version | 5.3 |
|---|---|
| Support | HFP/A2DP/HSP/AVRCP |
| Charging Port | Type-C |
| Battery life | 6 hours (earbuds) + 24 hours (4 times full charge with box |
| Charging time | 1.5hours for earbuds / 1.5hours for charging case |
| Transmission range | 15 meters (without obstacles) |
Introduction
How do I pair two headphones with my phone
-
Please make sure both the earbuds and the charging case are fully charged before first use.
-
Step 1
Take both earbuds out of the charging case and both earbuds will power on and start pairing automatically (If the earbuds are not connected to your device for more than 5 minutes ,the earbuds will automatically turn off Press the MFB button for about 3 seconds to manually turn on the earbuds when prompted “Power on”.) The indicator light of one earbud will flash white alternately, and the other earbud will slowly flash white when A50 earbuds paired successfully -
Step 2
Enable the Bluetooth pairing mode on your phone device, search and select “A50Pro” to connect. (You should hear a voice prompt “Connected” when wearing earbuds). -
If indicator light of earbud is off ,it means the phone is connected
-
Automatic connection By default, the earbuds will connect the last paired phone automatically when power on.
-
Prompt
1. If you have any problem pairing the two earbuds with your phone, put the earbuds back in the charging case and repeat the above steps. Or refer to the reset steps of Frequently Asked Questions in the manual.
2. These earbuds can be used not only together, but also individually If you want to use single earbud, just take one earbud out of the case and connect it to your phone. or when using two earbuds, manually turn off one earbud or put one back in the charging case and you’ll be able to use the other one earbud alone.
Functions
- Telephone Communication
| Answer call | tap once |
|---|---|
| Hang up | press and hold the key for 2s |
| Refuse incoming call | press and hold the key for 2s |
- For Music
| Play/pause | tap twice |
|---|---|
| Previous track | press and hold “L” for 2s |
| Next track | press and hold “R” for 2s |
| Activate Siri | quickly tap for three times |
| Turn down volume | single tap on left earbud |
| Turn up volume | single tap on right earbud |
Charging
-
Earbuds Charging
The earbuds will only be charged when you correctly place them in the charging slots and close the lid.(You can charge the charging case and the earbuds at the same time, or you can charge the charging case first and then the earbuds. -
Case Charging
There is a Type-Cusb charging cable in the package, please use it to charge the case directly. The charging box white lights will blink continuously when charging, and each light represents 25% of the power. -
Battery Status Indicator
Note : The 4 white lights of the charging box are only used to display the remaining power of the charging box and whether the left and right earphones can be charged normally.
- When put earbuds back to the box, the 4 indicators will display the remaining power of the box in 5 seconds, and each white light represents 25 % power of the box.
- After 5 seconds, the 2 lights in the middle of the charging box will be off, and the first light and the fourth light will be on at the same time, indicating whether the left earphone and the right earphone are charged normally.
- When the earbuds and the charging box are fully charged, or the charging box power is empty, the indicator light on the charging box will turn off.
Charging Alerts
- After using it for a long period of time, due to the oxidation of the magnet connector, the earbuds might not be charged or even turned on.
- You can fix this problem by cleaning the magnet connectors on the earbuds and charging case with an alcohol wipe
Storage and Maintenance
- If the earbuds have not been used for more than 3 months, we recommend that you charge it.
- Please use an charger approved by FCC (Federal Communications Commission). Children aged 12 and under require adult supervision.
- Do not expose the earbuds to high or low temperatures, and do not use the earbuds during a thunderstorm.
- Avoid free fall or violent shock to the device. Keep the device away from sources of fire and do not place the device in water.
Activation & Warranty
Permanent replacement of damaged, defective item or missing components. Please
activate via email below within 15 days.
motastservice@gmail.com
Frequently Asked Questions
Q : Why don’t these earbuds pair with my phone?****
A : Make sure the earbuds are fully charged and powered on. Make sure your phone’s Bluetooth is enabled If there is no problem with the two points stated above, turn off the powered-on earbuds after 5 continuous and quick clicks. Put them back into the charging case and close the lip, wait for 1 minute, then open the charging case and reconnect the earbuds to the phone.
Q : Why does the music cut in or out?****
A : First, keep the earbuds no more than 15m away from your phone (no
obstacles). If the distance is less than 15 m, follow these steps:
1. Put the earbuds back into the case and close the lid, manually click
“forget the A50 Pro” on your phone
2. After 10 seconds, open the charging case and reconnect these earbuds with
your phone
Q : Why the earbuds still won’t be charged or disconnect from the phone after I put them in the case and close the lid?****
A : Make sure the charging case is not in a low battery state. If the charging case is in a low battery state, the earbuds will neither be charged nor disconnected. In this case, please use a type-c charging cable to fully charge the case.
Q : Are these earbuds sweat- and water-resistant?****
A : These earbuds are sweatproof and slightly waterproof. For electronic devices, we do not recommend that you submerge the earbuds in water For more detailed product FAQs, please contact our customer service.