talent SOUND and LIGHTING BXR-1 Bluetooth Audio Receiver with Rechargeable Battery and USB Cable User Manual

: June 8, 2024
: talent SOUND and LIGHTING

Table of Contents

Bluetooth Pairing a Single BXR-1
Stereo-Link Two BXR-1s Together
Features
Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

talent SOUND and LIGHTING BXR-1 Bluetooth Audio Receiver with Rechargeable Battery and USB Cable

Bluetooth Pairing a Single BXR-1

Power on you Bluetooth device.
Power on the BXR-1 and the LED ring flashes red and blue looking to pair.
Navigate to your Bluetooth device’s set up screen and look for Talent BXR-1 and connect.
When paired successfully the blue light flashes rapidly.
Adjust the volume on your Bluetooth device and audio component.

Stereo-Link Two BXR-1s Together

Pair the first BXR-1 using Steps 1 thru 5.
Press and hold the STEREO-LINK button on both BXR-1 for 2 to 3 seconds.
Both STEREO-LINK LEDs will flash blue while searching for each other.
When they’re successfully paired, one BXR-1 will flash red and blue, and the other just blue.
Go to your phone’s Bluetooth settings and pair with the second BXR-1.

Note: To unlink the two BXR-1s hold the STEREO-LINK button down for 10 seconds and turn them off. The BXR-1 will start flashing red and blue when turned back on to indicate unlink was successful.
BXR-1 is an XLR Bluetooth receiver with 5.0 version chip. This chip offers high quality sound and its compatibility enables it to perform well with any Bluetooth device. Connect the 3-pin XLR to a mixing console or active speaker and sync it to a smartphone, tablet or other Bluetooth device for wireless performance up to 50 ft. The STEREO-LINK button lets you pair two BXR-1 Bluetooth receivers together for stereo sound.

Features

Micro USB Charging Port
Power On/Off switch
PAD 0db to -10db: Used to prevent signal overload and distortion.
Charge Indicator: Rapid flashing blue light signals low battery. Solid blue light shows battery is charging, and when the light goes out the battery is fully charged.
LED Indicator Ring: Flashes red and blue when trying to pair. The blue light flashes rapidly when successfully paired. Solid blue light indicates the BXR-1 is paired and playing music. Flashing Blue light indicates that the BXR-1 is connected and waiting for music.
Stereo-Link button
Male Balanced XLR Connector

Note: Before you plug in the BXR-1 into any device, make sure that the device’s power is off to avoid a loud popping sound. The BXR-1 works with any device that accepts a line-level XLR input.

Specifications

Bluetooth version: V5.0
Battery: 3.7V Lithium Polymer 502035
Standby current : <50uA
Working current : ≥30mA
Temperature range: -40° F to 176° F
Wireless transmission range: 10m (33 ft.)
Frequency response: 20 to 20,000 Hz
Sensitivity: -80 dBm<±0.1% BER
Bluetooth frequency: 2.4 Ghz-2.48 Ghz
Signal to noise: ≥75 dB
Distortion: ≤0.1%
Charge method/port: 5 VDC Micro USB
Stand by: Approximately 50 days
Working time :Approximately 10 hours
Size: 1.32″ D x 1.08″ H x 4.88″ L (33.4 x 27.5 x 124 mm)