GAME OF BRICKS 42077 Light Kit for Rally Car Instruction Manual
- June 15, 2024
- Game Of Bricks
Table of Contents
GAME OF BRICKS 42077 Light Kit for Rally Car
Product Information
Specifications
- Product Name : Light Kit for Rally Car 42077
- Wire Type : Severely thin aviation-grade wire
- Tension and Pressure Tolerance: High
- Maximum Voltage: 6V
Product Usage Instructions
Safety Precautions
Before starting the installation process, please keep the following safety precautions in mind:
- Do not cut through the severely thin aviation-grade wire as it may shear during installation.
- Avoid pressing brick pieces down on the wire to prevent damage.
Installation Process
- Step 1: Unpack the light kit and ensure that all components are included.
- Step 2: If you encounter any challenges during the installation process, please feel free to reach out to our support team at [email protected]. We provide 2 years of free light kit maintenance.
- Step 3: Begin the installation process by following the steps outlined in the manual sections labeled “Installation Process 03,” “Installation Process 04,” “Installation Process 05,” and “Installation Process 06.”
- Step 4: Connect the light kit to the battery box.
- Step 5: Once the light kit is connected to the battery box, the installation will be complete.
Note: If you prefer to use another power source, make sure that the maximum voltage does not exceed 6V.
Thank You
For Purchasing this product. To give you the perfect hidden-line effect, we
use severely thin aviation-grade wire with high tension and pressure
tolerance. However, due to its thin nature, be careful not to cut through it
as it might be susceptible to shearing during installation. Always be careful
not to press brick pieces down on the wire.
**Let’s Get Started
**
if you face any challenges, please feel free to reach out via [email protected] Please note that we offer 2 years of free light kit maintenance.
Installation Process
Connect light kit to the battery box and installation will be complete. If you would like to use another power source, please make sure the maximum voltage is 6V.
FAQ’s
What should I do if I accidentally cut through the wire during installation?
If you accidentally cut through the severely thin aviation-grade wire, please contact our support team at [email protected] for assistance.
Can I press brick pieces down on the wire?
No, it is important to avoid pressing brick pieces down on the wire to prevent any damage.