ifi MZ99 Headphone Amp Instruction Manual

ifi MZ99 Headphone Amp

Thank you for purchasing the CAN Signature from ZEN series. The CAN Signature MZ99 is a balanced headphone amplifier optimized for Meze headphones.

PRODUCT SPECIFICATION

1. Power switch

2. Input channel switch

   • Input 1: RCA
   • Input 2: Single-ended 3.5mm
   • Input 3: Balanced 4.4mm

3. Power Match selection: OdB/6dB/1 2dB/18dB
   We recommend starting from OdB and then increasing the switchable gain level to attain an enjoyable and comfortable level of volume from the headphones.
   Warning: at the outset do not use excessive gain, otherwise damage to hearing or connected headphones may ensue. AMR/iFiaudio is not responsible for any damage/injury from misuse.

4. Analogue Volume Control
   At normal istening levels, the volume control should be around the 12 o’clock position. Increase the gain level to enjoy a higher listening level.

5. Single-ended 6.3mm output
   For connecting single-ended 6.3mm headphones With single-ended 3.5mm headphones, connect with a 3.5mm to 6.3mm adapter.

6. Balanced 4.4mm analogue output
   For connecting balanced 4.4mm headphones.
   Tip: As the Meze headphones use balanced design, we recommend the 4.4mm balanced output.

7. MZ99 LED
   Headphone corrections optimized for Meze headphones.

8. XSpace Matrix LED

   • The XSpace Matrix(on/off) recreates a holographic sound field.
   • It is a pure analogue signal processing circuit designed for listening to headphones as ifone was listening to speakers. This addresses the ‘music inside the head’ sensation, which makes for unsettling listening.
     Tip: Sonically- hindering DSP is NOT used for Meze headphones nor XSpace Matrix systems. They use the highest-quality discrete components and operate purely in the analogue domain. Hence all the clarity and resolution of the original music is retained

9. Settings
   This button chooses between:

   • Off
   • MZ99
   • XSpace

10. Balanced 4.4mm analogue input
    This is a balanced analogue in put.

11. Single-ended 3.5mm analogue input
    For connecting single-ended 3.Smm input.

12. RCA analogue input
    This is an analogue input.

13. Balanced 4.4mm analogue output
    This is an analogue output via 4.4mm> XLR or other balanced interconnects. You could use this for an active speaker.
    Tip: As the ZEN CAN Signature MZ99 is balanced, this is the recommended output.

14. DC 5V power
    Please connect the ZEN CAN Signature MZ99 to the enclosed power supply, the super-silent iPower2. The ZEN CAN Signature MZ99 must ONLY be powered by 5 volts.

Specifications

• I nput voltage: DC 5V/2.5A
• Max Output:
  • Balanced:

  • 15.1V/385 mW (@ 600 Ohm)

  • 11.0V/1890 mW (@ 64 Ohm)

  • 6.2V/1200 mW (@ 32 Ohm)

  • S-E:
  • 7.6V/98 mW (@ 600 Ohm)

  • 7.4V/870 mW (@ 64 Ohm)

  • 7.2V/1600 mW (@ 320hm)

• THD &N:
  • Balanced: <0.006% (@ 360 mW/2.4V 16 Ohm)
  • S-E: <0.0059% (@ 100 mW/1.27V 16 Ohm)
• SNR:
  • Balanced: >121dBA (e 15.2V)
  • S-E: >120dBA (@ 7.6V)
• Max. Input:
  • Balanced: 7.4V RMS
  • RCA: 3.8V RMS
  • 3.5mm: 1.92V RMS
• Gain: OdB, 6dB, 12dB and 18dB
• Frequency Response: 10Hz-200kHz (-3d8)
• Power consumption:
  • No Signal: 5W
  • Max Signal: -12W
• Dimensions:
  • 158x 117×35 mm
  • 6.2″ x 4.6″x 1.4″
• Net weight: 550 g (1.21 Ibs)
• Warranty period: 12 months
  Specifications are subject to change without notice.

Connection Guide

Special By Design

• Active EQ is an exact match for Meze 99 Classic headphones
• End-to-end True Differential balanced circuitry
• Premium parts selection drawn from the £3,000 Pro range

Features

• Adjustable gain to match other headphones
• X Space analogue headphone
• 4.4mm balanced output

Activ EQ

• The Meze 99 Classic headphones
  • Offers exceptional tonality
  • Delivers outstanding dynamic expression
• ZEN CAN Signature MZ99
  • Adjusts the treble for more vivaciousness
  • Enhances the mid-low bass to extract the last drop of sonic goodness
• ActivEQ
  • EQ curve precisely matched
  • Active and passive components
  • Performed in the analogue domain
  • Unmatched noise reduction
  • SNR and distortion are unaffected
  • ActivEQ can be switched off to use with other headphones

Frequency Response 20Hz to 20KHz

Pro Series High-End Circuit Design

• Class A output stage from the Pro range
• Drives 15V/ 385mW@ 600 Ohm
• <0.006% distortion

Superior Design and Components

X SPACE

• X Space – analogue headphone spatialiser.
• This opens up your music to give you the spaciousness of a live-concert atmosphere.

Specifications

Max Output

| ****

Balanced

| >15.1V/385 mW (@ 600 Ohm)

11.0V/1890 mW (@ 64 Ohm)
6.2V/1200 mW (@ 32 Ohm)

---

Single-Ended

| >7.6V/98mW (@ 600 Ohm)

7.4V/870 mW (@ 64 Ohm)
7.2V/1600 mW (@ 32 Ohm)

---

THD&N

| Balanced| <0.006% (@ 360 mW/2.4V 16

Ohm)

Single-Ended| <0.005% (@ 100 mW/1.27V 16

Ohm)

SNR

| Balanced| >121dBA (@ 15.2V )
Single-Ended| >120dBA (@ 7.6V )

Max Output

| Balanced| 7.4V RMS
---|---|---
RCA| 3.8V RMS
3.5mm| 1.92V RMS
Gain| 0dB, 6dB, 12dB and 18dB

Frequency Response

| ****

10Hz – 200kHz (-3dB)

Power consumption

| No Signal ~5W
Max Signal ~12W

Dimensions

| 158 x 117 x 35 mm
6.2″ x 4.6″ x 1.4″

Net weight

| 550 g
1.21 lbs
Line Section

Outputs

| Balanced| 6.7V max. (variable)
UnBAL| 3.5V max. (variable)
Output Impedance| Balanced| ≤200Ω
UnBAL| ≤100Ω

SNR

| Balanced| <110dB(A) @ 0dBFS
UnBAL| <110dB(A) @ 0dBFS

THD+N

| Balanced| <0.007% @ 0dBFS
UnBAL| <0.015% @ 0dBFS
Headphone Section

Outputs

| Balanced| 6.7V max. @ 600 Ω
UnBAL| 3.5V max. @ 600Ω

Output Power

| Balanced| >1000mW @ 32Ω;

74mW @ 600Ω

UnBAL| >320mW @ 32Ω;

40mW @ 300Ω

Output Impedance| Balanced| <1Ω
UnBAL| <1Ω

SNR

| Balanced| <116dB(A) @ 0dBFS
UnBAL| <115dB(A) @ 0dBFS
THD+N| <0.005% (1V @ 16Ω)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>