MAD DOG GMC302 Live Stream Pro Steaming Microphone User Manual

MAD DOG GMC302 Live Stream Pro Steaming Microphone

SAFETY CONDITIONS AND HAZARDS

1. Use the device according to its intended purpose described in the operating manual.
2. Please carefully read the present operating manual before using the product.
3. Do not immerse the device in water or in other liquids.
4. Do not start a device with a damaged housing.
5. Avoid excessive shocks to the device and hitting other objects.
6. Do not use the device in extremely low and high temperatures.
7. Do not use the device in conditions of high humidity or in places where the device could come in contact with water.
8. Clean the device using a dry, soft cloth.
9. This product may only be operated by children 8 or more years old, mentally and/or physically deficient persons and persons without knowledge of or experience in operation of this appliance type if supervised or instructed in safe operation, with clear understanding of all related risks. Children should not play with the device. Unsupervised children should not carry out the cleaning and maintenance of the device.
10. When tightening mechanical components, never apply excessive force.
11. Keep the device away from children so that they do not play with it.
12. Keep the device cables away from hot surfaces and sharp edges.
13. Do not place the microphone too close to the speakers, as their operation may cause interference and malfunction of the device.

INTRODUCTION

Thank you for the trust you have placed in us when you purchased your Mad Dog device. We are convinced that this high-quality device will provide you with a lot of joy and satisfaction during its use.
PLEASE CAREFULLY READ AND FOLLOW THE OPERATING MANUAL!
This device is intended for domestic or other non-commercial use. The manufacturer will not be held liable for damages resulting from improper or non-compliant use.

TECHNICAL DATA

FREQUENCY CHARACTERISTICS

DEVICE DESCRIPTION

1. Pop filter
2. Table Clamp
3. Stand
4. Microphone
5. Foam overlay
6. Shock absorber
7. Stand adapter
8. XRL cable
9. 2x 3.5 mm mini jack adapter

INSTALLATION AND INITIAL START-UP

Installing the microphone stand to the worktop.

1. Screw the clamp to the edge of the worktop:
2. Place the stand in the hole and tighten the screw:
3. Attach the stand adapter, and then the shock absorber to the stand:
4. Place the microphone in the shock absorber:
5. Install the foam overlay over the microphone:
6. Bolt the pop filter onto the stand and place it in front of the microphone while recording:
7. After connecting the cable, the device is ready for operation:
8. If necessary, connect the XRL cable and the adapter that allows you to connect both headphones and microphone using the single mini-jack connector on a desktop or laptop computer.

Basic ways to connect the microphone using the splitter:
If there’s just 1 3.5 mm 4-pin jack input in the computer, in order to be able to use the headphones and the microphone at the same time, there are two basic ways of connecting:

1. Mad Dog GMC302 microphone (3.5 mm jack) + headphones without microphone (3.5 mm jack) –connect both sources to the splitter (green socket for headphones, red for microphone). The microphone cannot be connected to the headphone input directly in the headphones.
2. Mad Dog GMC302 microphone (3.5 mm jack) + headphones with microphone (USB) – connect the microphone to the splitter (green headphone input), turn off USB audio recording in the sound settings and leave the default settings for the built-in sound card.

These changes are made in the control panel in the „Sound” section. After correctly connecting the microphone, go to Start -> Settings -> Sound, and then check whether the microphone records sound correctly.

TROUBLESHOOTING

DIRECTIONS FOR USE

Be sure to set the volume control to the minimum value before connecting the microphone, and only after connecting the microphone, gradually adjust the sound settings until the appropriate level is reached.
If the microphone is covered or placed too close to a computer speaker, it may result in interference or distorted sound. To avoid this, first turn down the volume in the controller, and then set the microphone at an appropriate distance, remembering not to point it at the computer speakers. Do not hit the microphone or expose it to strong shocks, this may adversely affect the operation of the device.

ECO-FRIENDLY AND GREEN DISPOSAL

This device is marked, following Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on waste electrical and electronic equipment (WEEE), with the symbol of a crossed-out waste container:

Do not dispose of the device marked with this symbol together with household waste. For disposal return the device to your local waste treatment and disposal facility or contact your local authorities.
YOU CAN HELP PROTECT THE ENVIRONMENT!
Proper handling of waste electrical and electronic equipment contributes to avoiding harmful consequences for human health and the environment resulting from the presence of hazardous components and improper storage and processing of such equipment.

WARRANTY

MICROPHONE WARRANTY CONDITIONS

1. ART-DOM Sp. z o.o. with its registered office in Łódź (92-402) at ul. Zakładowa 90/92 National Court Register Number 0000354059 (Guarantor) guarantees that the purchased device is free from physical defects. The warranty covers only defects resulting from the causes inherent in the item sold (manufacturing defects).
2. A disclosed defect will be removed at the Guarantor’s expense within 14 days from the date of reporting the damage to the authorized service or point of sale.
3. In exceptional cases, e.g. the need to import spare parts from their manufacturer, the repair period may be extended up to 30 days.
4. The warranty period for the user is 24 months from the date of delivery of the goods.
5. The goods are intended for use only in the conditions of an individual household.
6. The present warranty does not cover:
7. damage caused by using the device in a manner inconsistent with the user manual,
8. mechanical, chemical or thermal damage,
9. repairs and modifications made by companies or persons that were not authorized to do so by the manufacturer,
10. parts that are easy to use or consumables such as batteries, bulbs, fuses, filters, knobs, shelves, accessories,
11. installation, maintenance, inspection, cleaning, unlocking, removal of contaminants and instruction.
12. The Guarantor will select the mode of defect removal at its own discretion. Removal of a confirmed defect of the device will take place through warranty repair or replacement of the device. The Guarantor may perform repairs when the buyer requests replacement or the Guarantor may perform replacements when the buyer requests repair if bringing the goods (device) into conformity in accordance with the granted warranty in the manner selected by the buyer is impossible or would require excessive costs at the part of Guarantor. In particularly justified cases, if both repair and replacement are impossible or would require excessive costs for the Guarantor, the Guarantor may refuse to bring the goods into compliance with the granted warranty and propose another way to settle the warranty claim.
13. The exchange of goods is made at the point of sale at which the goods were purchased (replacement or refund) or an authorized service point if it offers such service (replacement). The returned device must be complete, without mechanical damage. Failure to comply with these conditions may result in failure to accept the warranty claim.
14. In the event of non-compliance of the goods with the sales contract, the buyer is entitled by law to legal protection measures on the part and at the expense of the seller, and the warranty does not affect these legal protection measures.
15. The warranty is valid in Poland.
16. The condition for the warranty repair or replacement of the device is the presentation of proof of purchase and the use of the goods in accordance with the information contained in the user manual.

CAUTION!
Damage or removal of the rating plate from the device may result in warranty being deemed void.

We are constantly improving our products, so they may differ slightly from the images presented on the packaging and in the user manual. Please read the user manual carefully before operating the device.
ART-DOM Sp. z o.o., ul. Zakładowa 90/92, 92-402 Łódź. National Court Register number 0000354059

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>