Shenzhen Huier Industrial H32 4 In 1 Wireless Charger User Manual

4-IN-1 Wireless Charger (Foldable)
User Manual

Product Description

This device is a 4-in-1 fast wireless charger which can support power charging for Qi compatible mobile phone/ iWatch’ TWS Bluetooth Earphones. Also nightlight design is special and more practical.
This product adopts folding design. The folding method of the product is more convenient for storage and carrying. It can charge multiple devices at the same time Place the device in the charging area to wirelessly charge the device. You can place the phone vertically or horizontally without affacting the charging of the phone, and you can video chat or watch your favorita movies while charging.

Specifications

Watch”
Product List| Wireless charger x1, QC 3.0 adapter x1, Type-C charging cable x1, manual x1

Operation Steps

1. Please firstly power on the device by our equipped QC 3.0 adapter and Type-C charging cable.

2. If the power is connected, the indicator light turns red. When the wireless Charger ts in standby mode, the red light will remain on. The indicator light turns blue when the phone is in normal charging mode.

3. When charging devices such as Ql-enabled mobile phone, iWatch, or TWS. Bluetooth Earphones, just place these devices on the corresponding charging area and they will be charged only atier 0.1 second. When the devices are full charged or you want to terminate charging, just take them away from the charging area.
   Put and charge when powered on
   

4. When the charger is unfolded, the phone can be placed on the stand horizontally or vertically to get charged

Smart Indicator Light

1. standby mode – the red light is always on
2. Wireless phone charging – light turns blue

Compatibility

Compatible with all Qi-enabled devices
This wireless charger is designed to deliver to 15W output, depending on what your device model is.
For Apple watch series 8/SE 2/7/6/SE/5/4/3/2.
For Airpods Pro/3/2(wireless version only)’ and more TWS Bluetooth Earphones with wireless charging cases.
For iPhone 14/14Pro/14 Pro Max/13/13 Pro/ 13 Pro Max/ 13 Mini/ 12/ 12 Pro/ 12 Pro Max/ 11/ 11 Pro/ Pro Max/ X/ XS/ XS Max! XR/ 8/8 Plus.
For Samsung Galaxy S21/ $20/ $10/ S10 Plus/ S10E/ S9/ S9 Plus/ Galax S8/ S8 Plus/Note 10/ Note 9/ Note 8/ Note7/ S7/ S7 Edge/ S6/ S6 Edge/ S6 Edge Plus.
For Other Qi enabled Devices ( Support wireless charging).

Notes

Please pay attention to the following issues, otherwise it may cause abnormal charging, high charging temperature, intermittent charging, or even not charging.

1. Please put the phone/ Watch/ TWS earphones at the center of charger area.
2. It’s recommended to use the equipped Quick charger 3.0 adapter({ 9V/2A). 5V/2A mode is normal charging, and the charging speed is slower.
3. The charging distance is 2-10mm, please don’t wear protective case which is thicker thanb 5mm.
4. The watch has temperature control when the temperature reaches 45 degrees, which will stop charging automatically. If the temperature is normal, it will continue to charge.
5. The lower the temperature is, the faster charging speed is. The charging speed is faster in winter than in summer.
6. Please don’t charge in high temoersture and humid environments to avoid damage of circuit.
7. Put it at the place that children can’t reach to avoid unnecessary accidents.
8. Please place the charger away from flammable and explosive liquids or gases.
9. Do not place magnetic cards, magnetic stripe media and precision machinery too close to the charger.
10. No metal or magnetic objects around 6mm of the back center of the phone during charging.
11. Step 1: In the alarm clock display mode (A1, A2, A3).
    Step 2: Press f or | key to turn the alarm clock on or off.” –” means off, “On” means on.
    Step 3: Press and hold the M key to enter the alarm clock setting, then the panel will display the hour and minutes. Set the time at this time.
    Step 4: Press the f or | key to set. The 7 key will adjust up (increase) and the down key will adjust down (decrease).
    Step 5: Briefly press the M key to enter the minute setting. Press the “↑” or “↓” key to set.
    Step 6: Briefly press the M key to exit the setting.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body..

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>