Sunco SM2x2-40W-0K-6PK 2×2 LED Selectable Ceiling Panel Installation Guide

Sunco SM2x2-40W-0K-6PK 2×2 LED Selectable Ceiling Panel

Installation

EASY INSTALLATION Recessed Mount

1. Turn off circuit breaker before installing.

2. Place Ceiling Panel face down on flat surface.

   • Unscrew left driver and set aside screw.
     Optional: If using dimmer, unscrew right driver cover.

3. Pop out knockout (choice of 5).
   Optional: If using dimmer, pop out 2nd knockout.

4. Connect supply wires to Ceiling Panel wires with included wire nuts:

   • Black to Black (Live)
   • White to White (Neutral)
   • Green to Green (Ground)
     OPTIONAL : o use the dimming feature, connect pink and purple wires on the Ceiling Panel to compatible dimmer (not included).

5. Replace driver covers.

   • Tighten screws.

6. Set the preferred color temperature using CCT on back of Ceiling Panel.

7. Bend 4 protective brackets located on back of the Ceiling Panel up 90o.

8. Turn brackets 90o. The hook should face the outside edge of the Ceiling Panel.

9. Turn on the circuit breaker and test light.

WIRING DIAGRAM

SPECIFICATIONS

• Voltage
  • 100-277V
• Wattage
  • 40W
• Moisture Rating
  • Damp
• Housing Material
  • SPCC+PS Lens
• Weight
  • 4.18lbs
• Warranty
  • 7 Years

EASY INSTALLATION Suspension Mount

1. Turn off the circuit breaker before installing.

2. Place Ceiling Panel face down on flat surface.

   • Unscrew the left driver and set aside the screw.
     Optional: If using a dimmer, unscrew right driver cover.

3. Pop-out knockout.
   Optional: If using dimmer, pop out 2nd knockout.

4. Connect conduit to knockout.

   • Feed wires through

5. Connect supply wires to Ceiling Panel wires with included wire nuts:

   • Black to Black (Live)
   • White to White (Neutral)
   • Green to Green (Ground)
     OPTIONAL: To use the dimming feature, connect pink and purple wires on the Ceiling Panel to a compatible dimmer (not included).

6. Replace driver covers.

   • Tighten screws.

7. Set preferred color temperature using CCT on back of the Ceiling Panel

8. Drill 2 holes into ceiling.

9. Place anchors into hole, insert wire rope, and screw.
   Refer to the suspension kit’s (not included) install manual for complete details.

10. Adjust the support rope/wire to ensure Ceiling Panel is level.

11. Turn on the circuit breaker and test light.

WARNING

To reduce the risk of fire, electric shock, or physical injury:

• Turn off the circuit breaker before installing this fixture.
• This product should be installed by a person familiar with the construction and operation of the product and the hazards involved. Safety eyeglasses and gloves are recommended.
• Abide by related regional and local laws or regulations.
• Proper grounding is required to ensure safety.
• Check for shipping damage before installing. If the product is damaged, do not use it.
• Keep fixtures away from corrosive substances.
• Clean fixtures regularly to ensure proper operation. Do not clean with harsh solvents.
• Use safety precautions and abide by regional and local laws or regulations.
• This product is not compatible with 3rd party sensors.
• Suitable for damp locations at temperatures ranging from -4°F to 113°F. Not for use where directly exposed to water.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>