Pro iDSD Signature Amplifier User Manual

Pro iDSD Signature Amplifier

Thank you for purchasing this Pro series iDSD Signature. The Pro iDSD Signature is a ‘state of the art’ reference digital to analogue converter. lt is able to excel in many scenarios – as a wireless hi-res network player or the central DAC in an expensive high-end home system, to quote just two examples. The on-board balanced headphone section means high-end headphones can also be directly connected to it.

Feature:

• Reference-class DAC/preamp, network streamer and headphone amplifier
• Quad-stack DAC – 4x DACs in interleaved configuration enables exceptional resolution
• Crysopeia FPGA Digital Engine delivers bespoke digital filtering and up sampling
• Powerful XMOS XU216 X-Core 200 Series chipset processes incoming digital data
• State-of-the-art hi-res audio support: 32-bit/768kHz PCM and DSD512, plus full MQA decoding
• Choose between ‘Bit-perfect’ fidelity and a range of advanced digital filtering/up sampling modes
• DSD Remastering: option to upconvert PCM and DSD files to DSD512 or DSD1024
• Global Master Timing femto-grade clock system with external clock input options
• Zero-jitter memory buffer and galvanically isolated inputs eradicate digital distortion
• Wide range of digital inputs and analogue outputs – balanced and single-ended
• DLNA network streaming via Wi-Fi or Ethernet cable
• Discrete, fully balanced Class A amplifier stage with adjustable gain
• Tube and solid-state analogue modes – choose at the flick of a switch

1. LED indicator P4
2. Power P4
3. Input selector (incl. Brightness/Polarity) P4
4. Filter selector (incl. DSD Remastering/WPS)P5-6
5. Output mode: Solid-State/Tube/Tube+P7
6. OLED display P8
7. Single-Ended 3.5mm headphone socket P8
8. Headphone gain selection: 0dB/9dB/18dB P8
9. Headphone 6.3mm socket P8
10. Balanced 4.4mm headphone socket P8
11.  Analogue volume control (Line and Headphone outputs) P8
12. IR remote control sensor P8
13. XLR Balanced signal outputs P9
14. Single-Ended signal outputs P9
15. Output selector: HiFi Fixed/HiFi P9
16. Variable/Pro Fixed/Pro Variable P9
17. Ethernet P10
18. Host USB P10
19. Device USB P10
20. Coaxial/Optical Digital Input P11
21. . Micro SDHC P11
22. XLR Digital Input P11
23. Wi-Fi antenna P. BNC Digital Input P11
24. Clock Sync mode: P12
25. Atomic/DARS/Word/Standalone P12
26. Clock Sync output P12
27. DC loop out supply P12

Analogue 13-16
Outputs Digital 16-23
Inputs Clock 24-25

• LED
  Green: Warming Up
  White: Solid-State Mode
  Orange: Tube Mode
  Red: Protection Mode

• Standby/PoweR

• Input selector
  Use the selector to ’cycle’ through the following input options:

  • WiFi/Ethernet/Hard Disk/Micro SDHC
  • Device USB (connect to a computer)
  • Coaxial/Optical Digital Input
  • XLR Digital Input
  • BNC Digital Input

Also available via the input selector are:

• * Brightness (press to adjust)

  • Polarity (hold to adjust)
• Digital filter selection

The Pro iDSD Signature offers the following three choices of digital processing:

• Direct – Bit-Perfect
  • Both PCM and DSD signals are not processed in any way.

For PCM this is effectively what is sometimes called “non-oversampling” or “zero-oversampling.”
For DSD it means the file is retained in the original DSD format and directly converted to analogue without any digital processing.

PCM – Upsampling
In this case PCM is up-converted to 16 x PCM (705.6/768kHz) using a choice of digital filters.
The following five digital filters are available:

‘Bit-Perfect’ No digital filtering is applied, one tap
‘Bit-Perfect+’ No digital filtering is applied, one tap, SINC roll-off is corrected
‘Gibbs Transient Optimized’ Minimum filtering, no pre-ringing, minimum post ringing, 32tap
‘Anodizing’ taps Modest filtering, no pre-ringing, modest post ringing, 128tap
‘Transient Aligned’  Max filtering, max pre-ringing, maximum post-ringing, 16,384 taps

The digital filter selections can be made ‘on the fly’ to suit the listener’s preferences.

Each filter affects a different time-domain and frequency-domain performance.
DSD remains completely unprocessed.
DSD – Remastering
In this case incoming audio (except DSD512) is converted to either DSD512 or DSD1024 as selected, using the filter selected (including Bit-Perfect, meaning no digital filtering is applied).
All these digital processing options apply to ALL sources, including the network audio bridge and AES-EBU & S/PDIF inputs.
Inputs other than USB are currently limited to maximum sample rates of 192kHz PCM and DSD64 via DoP.
Please try all the different options to see which you enjoy the most.
Full Galvanic Isolation
All inputs are galvanically-isolated (including USB). The USB input is self- powered and does not draw power from the USB bus. Therefore, the USB section is quite impervious to aftermarket add-ons or tuning accessories.
WPS
For ease of use, simultaneously use the WPS button on the Pro iDSD Signature and the router so that they can both complete the handshake to pair up.

• Output section mode: Solid-State / Tube / Tube+

The Pro iDSD Signature is a one-of-a-kind product that is able to switch between:

• ‘Solid-State’ – a purely solid-state J-FET based circuit of fully-discrete Class A topology.
• ‘Tube’ – the J-FET circuitry is switched to the valve Class A section based on 2 x GE5670.
• ‘Tube+’ reduces available negative feedback to a minimum. As a result, a greater amount of the tubes natural harmonic distortion is produced (even order harmonics dominate).

When switching, there is a momentary pause as the circuit switches over.
The audio circuit is a development of if’s revolutionary ‘TubeState’ design. It is fully-discrete, fully-balanced with either tube or J-FET input switchable, bipolar second stage and mosfetbuffered bipolar Class A power stage (with Class AB for low impedance headphones and very high levels). The circuit is fully DC coupled.
Please note that, due to the wear on the cathode of tubes after an extended period of time in solid-state mode, the tube heater element will automatically power down and turn off the tubes. If the tube heater is shut off when switching to tubes, they will need to warm-up again (as if the whole Pro iDSD Signature itself was powered up from cold). Music will continue to play via the solid-state section until the tubes are ready.
This ensures maximum longevity for the NOS General Electric 5670 tubes.

• OLED display
  Headphone 3.5mm single-ended socket

3.5mm with TRRS iFi S-Balanced.

Headphone gain selection: 0dB/9dB/18dB
Always start from 0dB and then increase the gain level to attain an enjoyable and comfortable level of volume from the headphones.
Warning: at the outset do not use excessive gain, otherwise damage to hearing or connected headphones may ensue. AMR/iFi audio is not responsible for any damage/injury from misuse.

• Headphone 6.3mm socket

Balanced 4.4mm headphone socket
4.4mm TRRS Balanced headphones.
Tip: if possible, always use balanced headphones to take full advantage of the true balanced nature of the Pro iDSD Signature circuitry.

• Analogue volume control
  At normal listening levels, the volume control should be around the 12 o’clock position. Increase the gain level to enjoy a higher listening level.

• Infrared remote receiver
  Window for infrared remote receiver signal.

Rear of Pro iDSD Signature

Analogue Outputs

• XLR Balanced signal outputs
  Balanced signal output to an amplifier.

Single-Ended signal outputs
Single-Ended signal output to an amplifier.

• Output selector: HiFi Fixed/HiFi Variable/Pro Fixed/Pro Variable
  It is possible to set the signal output to different levels for home or studio use. Industry standard signal output levels apply; balanced output is ~4.6V (HiFi Fixed mode) and ~11.2V (Pro Fixed mode).
  Variable is adjusted via the front volume control. With the volume control at maximum the same signal levels listed above are achieved.

• Ethernet
  For a wired connection directly from a router or Network Attached Storage (NAS) source. Using the Legacy Player App stream Spotify (incl. Connect), TIDAL, Napster, QQ Music and many more.

•   Source Host USB ‘Type A’

For connecting an external hard disk drive (HDD, FAT32*), USB memory stick or similar to play music:

• * Drive must not draw large amounts of power (meaning mechanical HDD should be self powered).

  • Drive must be formatted as FAT32(*)
• Device USB ‘Type B’

For connecting a PC host such as a laptop or a server.

• Coaxial/Digital input
  For connecting an S/PDIF source such as a high-end CD transport.

• Micro SDHC

Insert a Micro SDHC card (FAT32*) with music files, up to 128GB is supported. All files from MP3 to FLAC to DSD(**) can be played directly through the Pro iDSD Signature via the Legacy Player App.

• AES/EBU (XLR) digital input

For connecting an XLR single link source such as a high-end CD transport or a Digital Audio Workstation (DAW).

• Wi-Fi antenna

Using the Legacy Player App, connect the Pro iDSD Signature to the local WiFi system to stream Spotify, TIDAL, Napster, QQ Music and many more.

It is also possible to enjoy Airplay network audio playback from iPhone, iPad and Mac computers. Wirelessly, just about every music format up to 192kHz/32-Bit from MP3 to FLAC to DSD can be played directly through the Pro iDSD Signature via the Legacy Player App or suitable server software.

• BNC digital input

BNC multifunction input (S/PDIF/AES3id) such as from a high-end CD transport. For clock synchronization in recording studios, the Pro iDSD Signature supports AES3id based DARS (Digital Audio Reference Signal) according to AES11.
It is equally possible to use an atomic reference clock (at least Sanford Research Systems PERF10 should be used) to further elevate the Pro iDSD Signature performance over the internal clock system.

Clock

• Clock Synch mode: Atomic/DARS/Word/Standalone

If the Clock Synch mode* is used, please select the correct clock device.

Atomic Clock: DARS:

Word Clock: Standalone:

Connect to an external atomic clock source (10MHz).
Digital Audio Reference Signal, connect to an external DARS clock reference (it is a S/PDIF signal without any actual audio data).
LRCLK / WCLK of I2S Signal.
No external clock source is used]

• Clock Synch output

BNC multifunction Sync Out (DARS out, Word out), selection via Clock Sync mode* switch.

• DC loop out supply

loop through for use with other Pro series products (e.g. Pro iCAN Signature).

• DC power supply connection

15V/4A DC power input.

Tip: Any 9v to 18v DC power source with a minimum of 60VA rating can be used with the Pro iDSD Signature (including vehicular, RV and boat based 12V DC power). We strongly recommend the use of the included iPower Plus 15v. It offers the latest in power supply technology and is better and cleaner than any battery or aftermarket linear power supply.

Design Notes from the AMR/iFi Research & Development department
The Pro iDSD Signature is an all-out assault on the state-of-the-art and its ground breaking digital engine will be used across the next generation of WiFi products.

1. DAC section The Pro iDSD Signature uses a quad ‘core’ of iFi audio’s bit-perfect DSD & DXD DAC by Burr-Brown in a custom’ interleaved’ configuration. A total of eight pairs (four for each channel) of differential signals are used and mixed.
   While the Pro iDSD Signature does include an FPGA for digital filter duties, the FPGAs themselves do not perform d/a conversion. There are always external d/a sections, with a limited number of elements. In the Pro iDSD Signature we use four interleaved 64-element converters, to give a total of 256 element DAC per channel, manufactured to the highest level of precision. Discrete DACs added can neither offer those elements’ numbers nor the accuracy required.
   All signals to the DACs are re-clocked with the low-jitter Global Master Timing® derived master clock from the AMR DP-777.

2. D igital Processing Imperfect or Up sampled

All digital processing is bit-perfect, without employing ASRC or up conversion unless digital filters embedded in the Crysopeia FPGA remastering engine are explicitly selected. Divergent digital filters (including bit-perfect mode without digital filtering) are selectable and operate in synchronous mode de.

The Pro iDSD Signature uses the second generation XMOS XU216 X-Core 200 Series 16-core processor with a maximum of 2,000 MIPS (two billion instructions per second) calculation power in dual-issue mode as USB interface.
The X-Core 200 handles decoding of signals from all Inputs, be it USB (up to 768kHz/DSD512), AES/EBU or S/PDIF (up to 192kHz/24Bit) and WiFi/network/mass- storage (up to 192kHz/32Bit).

Hi-res Network Audio
In addition to traditional inputs, the Pro iDSD Signature integrates a WiFi/network playback system, with built-in Spotify and Tidal (and other streaming services), wide protocol support including Airplay and USB memory/HDD/SD card playback to make a full standalone streamer/network audio player with 32 bit/192kHz & DSD64 support.
The following playback options are available with the Pro iDSD Signature:

• Airplay network audio playback from iPhone, iPad and Mac computers
• DLNA network audio playback from smartphones, tablets and Windows/Linux computers
• Playback from a hard disk drive (HDD), USB memory or SDHC memory card
• Playback from Network Attached Storage (NAS)
• Streaming playback includes Spotify, TIDAL, Napster, QQ Music and others
• The Pro iDSD Signature includes MQA() technology, which enables you to play back MQA() audio files and streams, delivering the sound of the original master recording.

The Pro iDSD Signature includes MQA technology, which enables you to play back MQA audio files and streams. ‘MQA’ or ‘MQA.’ indicates that the product is decoding and playing an MQA stream or file, and denotes provenance to ensure that the sound is identical to that of the source material. ‘MQA.’ indicates it is playing an MQA Studio file, which has either been approved in the studio by the artist/producer or has been verified by the copyright owner.
MQA and the Sound Wave Device are registered trade marks of MQA Limited.© 2016

Zero Jitter Memory Buffer for all inputs
Data for all inputs is sent to a large ‘dynamic’ memory buffer, where it is de-jittered to eliminate any transmission of source jitter to the DAC output. The memory buffer data is then re-clocked by the low-jitter Global Master Timing® clock, which also drives the X-Core 200 & FPGA engine.

Studio Grade DSD1024 Remastering

While the X-Core 200 is optimal for USB audio, AES/EBU/S/PDIF, MQA, DSD etc. decoding, it is not the best platform for DSP, digital filters and PCM-to-DSD conversion.
The other half of the digital processing is carried out by the Crysopeia FPGA engine. It handles digital filtering and PCM-to-DSD remastering up to DSD1024. We believe that FPGA excels in up sampling and digital filtering duties.
On-board hardware up sampling allows us to not only overcome the current DSD512 USB limitation, but also to implement multiple filters optimized for specific time-domain behavior related to both stages; digital and analogue. This level of optimization is simply not possible in generic software up conversion (as found in i.e. Foobar 2000).

There are five filters available:

‘Bit-Perfect’ No digital filtering is applied, one tap
‘Bit-Perfect+ ‘ No digital filtering is applied, one tap, SINC roll-off is corrected
‘ Gibbs Transient Optimized  Minimum filtering, no pre-ringing, minimum post ringing, 32 taps
‘Apodising’ Modest filtering, no pre-ringing, modest post ringing, 128 taps
‘Transient Aligned’ Max filtering, max pre-ringing, maximum post-ringing, 16,384 taps

Full Galvanic Isolation
All inputs are galvanically-isolated (including USB). The USB input is self- powered and does not draw power from the USB bus. The USB section is quite impervious to aftermarket add-ons or tuning accessories. The isolation barrier is placed not in the inputs but instead between the relatively noisy digital processing section and the clock / reclocker / DAC section, so not only USB related but all digital noise is isolated.
Cutting-Edge S/PDIF
The S/PDIF inputs use the technology derived from the AMR DP-777; a brand new solid-state HD-VDi implementation, memory buffer and the Global Master Timing® clock system. Given this extreme attention to jitter reduction, the S/PDIF inputs benefit little from additional tweaks or tuning gizmos.

External Clock options &  Synchronization
For the purpose of synchronization in recording studios, the Pro iDSD Signature supports AES3id based DARS (Digital Audio Reference Signal) according to AES11. And if you happen to have a really good atomic clock (of Sanford Research Systems PERF10 quality or higher), it can be used to further elevate the Pro iDSD Signature’s already impressive internal clock system performance. This is very much an over-specified approach, yet the iFi flagship deserves this feature in order to be as future-proof as possible.

• Passive Filtering and Discrete Analogue stage
  Each d/a converter operates in the ‘voltage output mode’, giving >119dB dynamic range. All filtering is passive. A fully-balanced 3rd order capacitor/inductor/capacitor filter is used to remove ultrasonic noise directly after the d/a conversion rather than active, feedback-based circuits.
  Active filters struggle with the amount of ultrasonic noise and RFI they have to handle and at a few 100kHz they often lose the ability to filter noise at all, which is precisely where a lot of it is present.
  Passive CLC circuitry in the Pro iDSD Signature provides the correct filtering well into the MHz region, so that the follow-on analogue stage is not required to handle ultrasonic noise and RFI originating within the DAC processes.
  An all-analogue six-track Japanese Alps potentiometer is to be found directly after DAC and filter stages. It can be bypassed if volume control is not required.
  The actual analogue circuitry is more precisely a line/headphone driver stage. First seen in the Pro iCAN, it’s fully balanced and 100% discrete, direct- coupled (without coupling capacitors) and tube/solid-state
  user-selectable. Our design is not just op-amp based discrete but radically different – pure Class A topology. It was inspired by exceptional sounding, legendary studio equipment.

• Power Supplies
  All incoming DC is converted to a high-frequency waveform and then rectified and filtered by a choke input capacitor filter (that is straight out of classic tube design, brought up to the latest 21st century technology).
  This produces a first-level DC bus from which all further voltages are derived. This circuit also generates a galvanically-isolated power supply voltage for the USB input circuitry.
  The digital section is powered by a bank of ELNA Dynacap DZ (TM) super capacitors of 6.6 Farad (6,600,000uF) value in total. ELNA Dynacap DZ (TM) super capacitors have around 400x lower internal impedance (in comparison to similar products of regular grade) and are used to avoid the typical drawback of the very high internal impedance of common ‘super capacitors’.
  Individual low-noise TI LDO regulators with local LC filtering provide the final low-noise power for all individual digital sections. A total of six individual regulators cover clock, S/PDIF input and the digital section. The analogue side of the DAC is supplied with ultra-low noise super-regulators based on iFi audio’s custom ultra-low noise OV2028 operational amplifier.
  The USB input section has its own separate power management system with multiple regulators and filtering operating from the galvanically-isolated voltage generated to power this section.
  Higher voltages (especially for the tubes) are required for the analogue stage, which in effect operates on 60V rail providing massive potential dynamic range. These are generated from the main DC bus and are filtered via multiple inductor/capacitor stages based on great Elna Silmic capacitors.

Every section in the Pro iDSD Signature has received massive attention to detail. Classic, very low-noise design techniques found in tube equipment have been combined with 21st century tech to deliver extreme performance.

Specifications

Sample rates:PCM up to 768kHz
DSD up to 49.152MHz (DSD 1024)
MQA up to 384/352.8kHz
DXD and double-speed DXD (2xDXD)

Input

USB (required for DSD, DXD and sample rates above 192kHz)
AES3 (XLR – single link)
S/PDIF (coaxial/optical combo)
BNC multifunction (S/PDIF in or sync input)

Output

Balanced XLR at 4.6V (+15.5dBu – HiFi) or 10V (+22dBu – Pro)
Single-Ended RCA at 2.3V (HiFi) or 5V (Pro)
Headphones 6.3mm & SE 3.5mm jack at 0.55V/2.1V/5V (Output impedance <1 Ohm) Headphones 4.4BAL mm jack at 1.13V/4.6V/10V (Output impedance <2 Ohm) Headphones out 1,575mW RMS x 2 @ 64 Ohm, 4,200mW max. x 2 @ 16 Ohm

Volume control

Balanced (6-gang) Alps potentiometer, motorised with IR remote control

XLR/RCA outputs can be selected as fixed level or adjusted
6.3mm headphone jack is always adjusted

Other functions
Various digital and analogue filters can be selected for DSD and PCM up to 384kHz

PCM Filters:

Bitperfect 44.1 – 192kHz, always used for 352.8 – 768kHz
Bitperfect + 44.1 – 96kHz
Gibbs Transient Optimized Apodising 44.1 – 384kHz
Transient Aligned 44.1 – 384kHz

DSD filters:

fixed 3rd order analogue filter @ 80kHz with correction for DSD’s -6dB gain

Gain (headphone section): user-selectable: 0dB, 9dB and 18dB

dynamic range A119dBA us (solid-state, PCM, -60dBFS)

Output power: 4,200mW / >1,575mW (16Ω, balanced/single-ended)
Output voltage: > 11.7V / >5.9V (600Ω, balanced/single-ended)
Input voltage (Pro iDSD Signature): DC 9V/6.7A – 18V/3.35A

Input voltage (iPower Elite):  AC 85 – 265V, 50/60Hz

Power consumption < 22W idle, 50W max.
Dimensions: 213 x 220 x 63 mm (8.4″ x 8.7″ x 2.5″)
Net Weight: 1.98 kg (4.37 Ibs)
Limited Warranty: 12 months*

Note: the clock sync in/out options allow several Pro iDSD Signature units to be slaved together for multichannel use. 8-12 channels are supported on one USB 2.0 connection from the host computer.
*12 months typical or as permitted/required by local reseller laws.
**Specifications are subject to change without notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>