OdeSea TX-65 PRO Outboard Motor Trolley Instruction Manual

June 9, 2024
OdeSea

OdeSea TX-65 PRO Outboard Motor Trolley

OdeSea TX-65 PRO Outboard Motor Trolley

Features TX-65 Pro

  • Easy in use
  • Light weight (4kg)
  • 50% weight reduction
  • Non corroding
  • No welding used
  • Easy one time assembling

Installation instruction

OdeSea TX-65 PRO Outboard Motor Trolley 1

Setting up the trolley for your engine

Step 1. Lower the trolley bracket to lowest position

OdeSea TX-65 PRO Outboard Motor Trolley 2

Step 2. Lock the engine in straight position

OdeSea TX-65 PRO Outboard Motor Trolley 3

Step 3. Position the engine on the ground next to the trolley, with the back of the engine clamp parallel to the front of the trolley bracket.

OdeSea TX-65 PRO Outboard Motor Trolley 4

Step 4. Measure the horizontal distance between the bracket and the end of the engine tail.

OdeSea TX-65 PRO Outboard Motor Trolley 5

Step 5. Slide the tail support to the previously measured position on the tube and tighten the knob.

OdeSea TX-65 PRO Outboard Motor Trolley 6

Now the trolley is set up for your engine. This does not need to be changed when you only use this specific engine on the trolley.

Mounting the outboard engine

WARNING! Read these instructions to ensure safe mounting of the outboard engine

Note: it is possible to use the outboard trolley as a single person.
The TX-65 outboard motor trolley is ready for mounting an outboard engine after being fully assembled and set up for your outboard engine. To mount an outboard engine onto the trolley, please read the following steps carefully.
Make sure that:

  • the wheels are set to the maximum width and the knobs are turned tight
  • the tube with the bracket is down so that the bracket rests on the frame
  • the knob of the horizontal tube is tight

Step 1: Lift the outboard engine about 10 cm high and place the tail of the outboard engine in the tail-support. Use 2 hands!

OdeSea TX-65 PRO Outboard Motor Trolley 7

Step 2: Tilt the outboard engine so that it is straight above the bracket.

OdeSea TX-65 PRO Outboard Motor Trolley 8

Step 3: Hold the engine with 1 hand. With the other hand lift the trolley bracket until it cannot go any higher.

Step 4: Tighten the knob of the tube with the bracket to fix it in position.

OdeSea TX-65 PRO Outboard Motor Trolley 9

Step 5: Hand tighten the clamp screws of the outboard engine to the trolley bracket.

Step 6: Adjust the handle to your desired height.

OdeSea TX-65 PRO Outboard Motor Trolley 10

Now your outboard trolley is ready to go!

Documents / Resources

| OdeSea TX-65 PRO Outboard Motor Trolley [pdf] Instruction Manual
TX-65 PRO Outboard Motor Trolley, TX-65 PRO, Outboard Motor Trolley, Motor Trolley, Trolley
---|---

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals