Gallet BOU 792 Electric Kettle with Regulation Instruction Manual
- June 4, 2024
- Gallet
Table of Contents
Gallet BOU 792 Electric Kettle with Regulation
INSTRUCTIONS FOR USE
Dear customer, thank you for purchasing our product. Keep these instructions
including the warranty, the receipt and, if possible, the box with the
internal packing.
SAFETY WARNING
GENERAL PROVISIONS:
- Before the first use, read the instructions for use carefully, look at the illustrations and store the instructions for use for the future. Consider the instructions for use as a part of the appliance and pass them on to any other user of the appliance.
- Check whether the data on the type label correspond with the voltage in your socket. The power cord plug has to be connected to the properly connected and grounded socket according to the national standard.
- This product can be used by children at the age of 8 years and older if they are supervised or if they were instructed regarding use of the appliance in a safe way and if they understand possible risks. User cleaning and maintenance must not be performed by children if they are younger than 8 year and unsupervised. Children younger than 8 years must be kept out of reach of the appliance and its power cord.
- The device may be used by persons with reduced physical or mental abilities or lack of experience and knowledge only if they are under supervision or they have been instructed about using the appliance safely and understand the potential dangers.
- Children must not play with the appliance.
- The electric kettle is intended for heating a maximum of 1.8 l of water. If the water level exceeds the maximum recommended amount, hot water may be splashing out.
- WARNING: Do not open the lid if the water is boiling or if it is hot.
- CAUTION – Do not use the appliance with a program, time switch or any other part that turns the appliance on automatically as there is a risk of fire if the appliance is not covered or placed properly.
- The kettle may not be used without the filter sieve.
- When the appliance is in operation, prevent pets, plants or insects to get in contact with it.
- Do not plug the fork of the supply cord into the power outlet and do not unplug the cord with wet hands or by pulling by the supply cord!
- Use the kettle with the stand designed for this type only and only for its intended purpose.
- Prevent injuries when handling (e.g. by hot water, steam).
- The appliance is equipped with the heat safety lock which disconnects power supply if the steam sensor fails, if water boils away or if an empty kettle is turned on. If it happens, unplug the appliance from power supply and let it cool down. Do not fill the kettle with cold water in order to cool it down quickly. It could reduce life of the heating element.
- Use this appliance only for the purpose for which it was designed as specified in this user‘s manual. Never use the appliance for any other purpose.
- All text in other languages and pictures shown on the packaging, or the product itself, are translated and explained at the end of this language mutation.
- WARNING: There is a risk of injury in case of incorrect use (not in accordance with the manual) of the appliance.
- The producer is not responsible for damage caused by improper use of the appliance (e.g. burning, scalding, fire) and its guarantee for the appliance does not apply to situations when the safety warnings above are not complied with.
USE OF THE APPLIANCE
- Use the electric kettle with the stand designed for this type only.
- Never immerse the electric kettle and the stand in water and other liquids (even partially)!
- The kettle may not be used without the filter sieve.
- Never leave the appliance unsupervised and check it during the whole time of water heating!
- This appliance is not intended for outdoor use. Do not place any objects on the appliance.
- The appliance is intended for home use and similar (in shops, offices and similar workplaces, in hotels, motels and other residential environments, in facilities providing accommodation with breakfast). It is not intended for commercial use!
- The electric kettle cannot be used for heating other liquids than water! Never insert into the kettle tea bags, tea leaves or any other ingredients for the beverage!
- Use the appliance in the working position only at places with no risk of turning over and in sufficient distance from heat sources (e.g. heater, stove, cooker, oven, grill), flammable objects (e.g. curtains, drapes, etc.) and wet surfaces (e.g. sinks, wash basins, etc.).
- Do not place the appliance near objects or under objects which could get damaged by steam, e.g. walls, kitchen cupboards, sideboards, paintings, or curtains. Leaking steam could damage them.
- Do not use the appliance in an environment saturated with explosive or flammable steams.
- There must be water in the electric kettle before putting into operation. Do not fill the electric kettle with water if it is on the stand.
- Do not touch outer surfaces during operation of the kettle, they are hot and there is a risk of getting burned. Do not touch thel lid during and after cooking!
- According to the type of your kettle, the surface is ceramic or glass. These materials are very fragile, pay special attention when handling, operation, maintenance and storage to avoid injury. Never use the kettle if it is broken, cracked or shows signs of any damage or fissure.
- Before switching on the kettle ensure that the water level is between MIN and MAX marks
- If you are not going to use the electric kettle for longer time, we recommend unplugging the stand from power supply by taking the fork of the power cord out of the socket.
POWER CORD
- If the power cord of the appliance is corrupted, it has to be replaced by the manufacturer, its service technician or a similarly qualified person so as to prevent dangerous situations.
- Never use the appliance if its power cord or plug is damaged, if it does not work properly, if it fell down and was damaged or if it fell to water. In this case take the appliance to a special service to check its safety and proper function.
- Never put the power cord on hot surfaces or do not let it hang over the edge of a table or a work top. Plugging or pulling the power cord e.g. by children can result in tilting over or drawing the appliance down and serious injury!
- The power cord must not be damaged with sharp or hot objects, open fire, it must not be sunk into water or bent over sharp edges.
DESCRIPTION OF THE APPLIANCE
A – electric kettle
- A1 – water gauge
- A2 – handle
- A3 – lid
- A4 – lid lock button
- A5 – signal lights
- A6 – filtration sieve
B – control panel with display
- B1 – ON/OFF button; 100 °C/KEEP WARM with a signal light
- B2 – temperature setting button with a signal light
- B3 – dechlorination button with a signal light
- B4 – display with a signal light indicating the selected temperature and current water temperature
C – removable stand
- C1 – central connector
- C2 – supply cord
The control electronics ensures the appliance turns off automatically after the set temperature or boil of water has been reached.
INSTRUCTIONS FOR USE
Remove all the packing material and take out the electric kettle with the stand. Remove all possible adhesion foils, stick-on labels or paper from the appliance. Before the first use, fill the electric kettle with clean water to the maximum level, turn it on and let the water boil. Then pour out the water and repeat the procedure several times (at least five times).
APPLICATIONS
Unwind the necessary length of the power cord C2 from the storage space of the
stand C. Place the stand on a suitable surface, in the height of about 85 cm,
out of reach of children and incapacitated persons and plug the fork of the
power cord to the electric socket (you will hear a signal sound; the display
will come on, the icons will flash briefly and the current water temperature
will be shown; the B1 button signal light is flashing).
Hold kettle A on the handle A2. Open the lid A3 by pressing the lock button A4. Fill the kettle with drinking water. Minimum and maximum water level is indicated by the watermark A1. Close the lid by snapping and position the kettle filled with water onto the removable base C (you will hear a signal sound; the display will come on, the icons will flash briefly and the current water temperature will be shown; the B1 button signal light is flashing). If there is no action, the temperature displayed will disappear. If the kettle remains placed on base C, the B1 button signal light will remain flashing.
A) Water heating to 100°C
Press the button B1 to automatically switch on the kettle to a temperature of
100 °C; the background colouring of the signal lights A5 will come on. By
pressing the button B1 repeatedly, the kettle will switch off.
As soon as the required temperature is reached, the kettle will switch off.
B) Heating water to a temperature between 60 and 90 °C
By pressing the B1 button, the kettle will switch on automatically to a
temperature of 100 °C; when you press the B2 button repeatedly, you can set
the required temperature to 60, 70, 80 or 90 °C; the selection of the required
temperature is indicated by the indicator light on display B4. When you select
the temperature, refrain from pressing anything – heating will start
automatically.
At the same time, the relevant background colour of the signal light A5 will come on. As soon as the temperature setpoint is reached, the kettle will switch off (you will hear a signal sound). When the kettle is heating, you can change the temperature setpoint by simply pressing the temperature selection button B2.
C) Heating water to a temperature between 60 and 90 °C with the KEEP WARM
function (maintaining the temperature)
Press and hold the B1 button for approximately 2 seconds. When you press the
B2 button repeatedly, you can set the required temperature to 60, 70, 80 or 90
°C; the selection of the required temperature is indicated by the relevant
signal light on the display B4 flashing. When you select the temperature,
refrain from pressing anything – heating will start automatically. When the
heating process is finished, you will hear a signal sound and the kettle will
keep the temperature for 2 hours.
D) Water dechlorination feature
By pressing the B1 button, the kettle will switch on automatically at a
temperature of 100 °C. Press the dechlorination button B3. You will hear a
signal sound again and the dechlorination process will be started (the signal
light of the dechlorination button will be on). After 3 minutes of boiling,
boiling will switch off automatically, you will hear a signal sound and the
dechlorination process will be completed.
Please consider the following tips as examples and inspiration not intended to provide complete instructions, but just to show the possibilities of heating of various liquids. Water temperatures are only approximate and may vary according to personal taste, quantity, type, quality and age of the used tea, coffee, etc.
- 60 °C = hot beverages,
- 70 °C = green tea,
- 80 °C = white tea,
- 90 °C = oolong teas, coffee, instant drinks, soup,
- 100 °C = black, herbal tea.
Note: To ensure maximum accuracy of the temperature set, which is lower than 100°C, we recommend heating no less than 0.7 litres of water (preferably more than 1 litre).
Always use fresh drinking water for boiling. The temperature and time heating depends on the amount of water and the initial temperature of water. For the correct temperature setting, follow the manufacturers‘ instructions that are described on food packages (e.g. tea, coffee, instant drinks, soap, etc.).
Note
- Lifting the kettle off the stand cancels all the set functions.
- If you set a heating temperature that is lower than the current water temperature, you will hear two signal sounds and the kettle will switch off. However, if you activate the KEEP WARM function when setting a temperature that is lower than the current temperature, the kettle will maintain the temperature at the value you have set (i.e. it will wait till the water temperature drops to this value and maintain it).
MAINTENANCE
Clean the kettle only when it is cooled down! Do not use rough and aggressive detergents (e.g. sharp objects, scrapers, diluting agents or other solvents)! The casingof the electric kettle is made of top-quality glass and the heating bottom is made of top-quality stainless steel, but in common use, impurities from water get stuck on them (water scale), particularly above the heating element. It is not rust or another material defect of the kettle container and the appliance is not subject to a complaint for this reason.
Cleaning the kettle
In the hard water area, it is important to do the decalcification regularly to
keep the kettle in good working condition, because too much scale inside may
cause the kettle fail to work. For the best performance of your kettle,
decalcify the unit from time to time. The frequency depends on the hardness of
your tap water and how many times you have used the kettle. Decalcification
will clean the interior of the unit.
This may be done in the following manner:
Put about 50 g of citric acid into the kettle with limescale sediment. Fill
the kettle half with water and stir. After dissolving, fill it up to ¾ of the
maximum amount of water. Place the kettle on the stand and turn on. Turn off
the kettle before reaching boiling point, let the solution work for 10 minutes
and then pour it out. Rinse the kettle thoroughly with clean water. In case of
very thick sediments, you can repeat the process. Clean the kettle regularly!
Expert service must do the large maintenance or to intervene into inside parts of the appliance! Non-observance of the instructions of the manufacturer cancels the right for guarantee repair!
TECHNICAL DATA
- Voltage (V) shown on the type label of the appliance
- Absorbed power (W) shown on the type label of the appliance
- Max. volume (l) 1,8
- Weight (kg) approximately 0,8
- Protection class of the appliance I.
- Size (mm): 255 x 160 x 225
- Input in off mode is <0,5 W
The manufacturer reserves the right to change the technical specifications and accessories for the respective models.
LEGISLATIVE & ECOLOGY
WARNING:
DO NOT USE THIS PRODUCT NEAR WATER, IN WET AREAS TO AVOID FIRE OR INJURY OF
ELECTRIC CURRENT. ALWAYS TURN OFF THE PRODUCT WHEN YOU DON’T USE IT OR BEFORE
A REVISION. THERE AREN’T ANY PARTS IN THIS APPLIANCE THAT ARE REPARABLE BY
CONSUMERS. ALWAYS APPEAL TO A QUALIFIED AUTHORIZED SERVICE. THE PRODUCT IS
UNDER A DANGEROUS TENTION.
HOUSEHOLD USE ONLY. DO NOT IMMERSE IN WATER OR OTHER LIQUIDS. TO AVOID THE DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES, OR PLAYPENS. THIS BAG IS NOT A TOY.
Disposal of old Electrical & Electronic Equipment (Applicable in the
European Union and other European countries with separate collection systems).
This symbol on the product or on its packaging indicates that this product
(or battery/accumulator) shall not be treated as household waste. Instead, it
shall be handed over to the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate
waste handling of this product. The recycling of materials will help to
conserve natural resources. For more detailed information about recycling of
this product, please contact your local Civic Office, your household waste
disposal service or the shop where you purchased the product. The symbol
indicates a WARNING.