WitMotion WT901BLECL Bluetooth 5.0 Inclinometer Sensor User Guide
- June 9, 2024
- WitMotion
Table of Contents
WitMotion WT901BLECL Bluetooth 5.0 Inclinometer Sensor User Guide
How to get the APP? iPhone Search
“WITMOTION” on App Store
Android
Scan the QR code and download
Preparation
-
Turn the sensor switch to ON, the blue light will flash quickly.
-
Download and install the APP, allow the access of Bluetooth, Location.
-
Open the APP, select module type “BLE5.0 Series”
Quick pairing
Step 1. Click “Scan” to search for the device (“WT901 BLE”+”MAC address”)
Step 2. The data appears automatically after successful pairing, and the
blue light will flash slowly.
Config Menu
Step 1. Click the icon in the upper left corner.
Step 2. Configure the sensor as you wish.
*For details, please kindly check the manual.
Data Recording
-
Click record, start recording, then click stop as you prefer.
-
The recorded file can be found by searching “rec” on the file manager of your phone.
-
The txt file can be easily opened if you use the Excel nrnnram likp Mirrncnft nffirpi
Document Center:
Scan the QR code to get the complete tutorial of
WT901BLECL
Having troubles with our products?
We are here to help.
support@wit-motion.com
PC Connection
How to get software?
Scan the QR code, click to download BLE5.0 Software for Windows PC and unzip
the files.
For cable connection, you can simply use the cable packed with sensor.
For adapter connection, you need buy the BLE 5.0 adapter
WT901BLECL
Type-C cable
BLE Adapter
Cable Connection
Step1. Connect the sensor with offered Type-C wire and turn the switch to
ON.
Step2. Install the driver- CH340, scan the QR code, click to download
driver.
Step3. Open the device manager, confirm if there is Com ports (COM &LPT)
generated.
Step4. Open the software(Minimu.exe)
Step5. Hit “Aulo-search” button and wait for 30 seconds, data will appear.
Adapter Connection
The pairing process of connection may vary from the different operating systems.
Windows 7 OS computer
Please check below QR code for detailed instructions.
Windows 10 OS computer
Complete Process:
Step 1. Insert adapter into the USB port firstly, turn on the sensor after blue light of adapter flashes.
Step 2. You can find “nRF52” on “Bluetooth & other devices” control panel
once it is recognized.
Step 3. Run the MinilMU.exe application as page 10 hit “search” button to
find the device
Step 4. Select “device” and wait for 30 seconds, data will appear.
Config Menu
Preparation: Ensuring the sensor is “Online”.
Calibration on PC software: It is recommended to calibrate for the first time
usage.
- For more, please kindly check the manual.