VIRONE WB-1 Wireless Battery-Free Switch With Receiver User Manual
- June 9, 2024
- VIRONE
Table of Contents
VIRONE WB-1 Wireless Battery-Free Switch With Receiver
IMPORTANT
Before connecting and using the device, read this Operating Manual and keep it
for future reference. In case something written herein is unclear, please
contact the seller. The manufacturer is not responsible for any damage that
can result from improper device installation or operation. Any repair or
modification carried out by yourselves results in loss of guarantee.
In view of the fact that the technical data are subject to continuous
modifications, the manufacturer reserves a right to make changes to the
product characteristics and to introduce different constructional solutions
without deterioration of the product parameters or functional quality.
Additional information about VIRONE products are available at www.virone.pl.
Orno-Logistic Sp. z o.o. holds no responsibility for the results of non-
compliance with the provisions of the present Manual. Orno Logistic Sp. z o.o.
reserves the right to make changes to the Manual – the latest version of the
Manual can be downloaded from support.virone.pl. Any
translation/interpretation rights and copyright in relation to this Manual are
reserved. Do not use the device against its intended use.
- Do not use the device against its intended use.
- Do not immerse the device in water or another fluid.
- Do not install and operate the device when the housing is damaged.
- Do not modify the device or do not repair it by yourself.
- The device is intended for indoor use.
DISPOSAL
Every household is a user of electrical and electronic equipment and therefore
a potential producer of hazardous waste to humans and the environment from the
presence of hazardous substances, mixtures and components in the equipment. On
the other hand, waste equipment is a valuable material, from which we can
recover raw materials such as copper, tin, glass, iron and others. The symbol
of a crossed-out rubbish bin placed on the equipment, packaging or documents
attached thereto indicates the necessity of separate collection of waste
electrical and electronic equipment. Products marked in this way, under
penalty of a fine, may not be disposed of in ordinary waste together with
other waste. The marking also means that the equipment was placed on the
market after the 13th August 2005.
It is the user’s responsibility to hand over the waste equipment to a
designated collection point for proper treatment. Used equipment may also be
returned to the seller in case of purchase of a new product in a quantity not
greater than the new purchased equipment of the same type. Information about
the available waste electrical equipment collection system can be found at the
information point of the shop and in the municipal office. Proper handling of
waste equipment prevents negative consequences for the environment and human
health!
WIRING DIAGRAM
DIMENSIONS
CHARACTERISTICS
The device receives a radio signal from a wireless, battery-free switch (transmitter) and controls the load. The device has a built-in radio transmitter and operates at 433.92 Mhz. The switch functions as a 1-channel remote control. The receiver can be paired with multiple switches (transmitters).
TECHNICAL DATA
- Nominal voltage: 230V ~, 50Hz
- Output type : on/off power output
- Max. current : 10A
- Max. power of traditional light source : <2300W
- Max. power for LED: <500W
- Current consumption (standby): <0,5W
- Working frequency: 433.92MHz
- Range in open field : Max. 80m
- Maximum number of paired transmitters: 10
- Working temperature : -20°C~+60°C
- Material: fireproof PC (receiver)
- Dimensions:
- 50×22.6mm (receiver)
- 86x86x17.4mm (transmitter)
- Net weight:
- 0.040kg (receiver)
- 0.076kg (transmitter)
OPERATING
Power indicator:
- not light (power supply disconnected)
- illuminated (power supply connected)
- LED flashes (in pairing mode)
Receiver control button:
- briefly press (on/off),
- press the button for approx. 3 seconds (enter pairing mode),
- press and hold the button for 10 seconds (delete all paired transmitters),
Change the default device status after a power failure
The factory setting of the device status is off. You can change this setting as follows:
- Disconnect the power supply to the device and wait 30 seconds.
- Press and hold the receiver control button.
- With the button pressed, connect the power and when the LED on the receiver turns on you can release the button.
Pairing the receiver with the transmitter
-
Enter pairing mode for this purpose.
Press and hold the control button for approx. 3 seconds until the LED on the receiver starts flashing or Within 5 seconds of turning on the receiver press the switch (transmitter) 3 times, the led on the receiver should flash. -
Press the switch (transmitter) briefly to confirm pairing.
Note : If no action is taken within 30 seconds of entering pairing mode, the device will automatically exit pairing mode.
Deleting paired transmitters
Press the control button on the receiver for approx. 10 seconds, the led should flash quickly 2 times. This means that all transmitters have been successfully deleted from the memory or Within 5 seconds of switching on the receiver press the switch (transmitter) 5 times, the led on the receiver should flash quickly 2 times. This means that all transmitters have been successfully deleted from the memory.
ORNO-LOGISTIC Sp. z o.o.
ul. Rolników 437, 44-141 Gliwice, POLAND tel. (+48) 32 43 43 110,
www.virone.pl
Model : WB-1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>