John Kovac 26 String 3.5 Octave Harpune Folk Harp Kit and Supplies Instruction Manual

June 9, 2024
John Kovac

John Kovac 26 String 3.5 Octave Harpune Folk Harp Kit and Supplies

John-Kovac-26 String-3.5-Octave-Harpune-Folk-Harp-Kit -and -Supplies-
PRODUCT-IMAGE

26 String, 3.5 Octave Kovac Harpune Folk Harp Kit & Supplies

(See the Harpune plans & installation directions for exact details)

Strings & Hardware Kit
  • 1 Set, 26 Nylon monofilament Strings, starting at 1 octave below Middle C (See 2nd page below & see Kit for details) 26 Small Plastic or Wood Beads typically used for Crafts & Necklaces (Sized to fit strings & knots)
  • 26 Eyelets (Brass Grommets) (21 Small Grommets – use #44 Gauge Drill Bit; 7- Medium Grommets – use #32 Gauge bit) 26 (13L/13R) Guitar tuning machines with ¼” shafts & grommets
  • 26 Screw sets for the guitar tuning machines
  • 6 Screws for the harp sides (#8 x 1” Washer Heads, Decorative)
  • 1 Nut & Bolt (¼”-20 x 2.5” Hex Head)
  • 2 Long Screws (#8 x 1.5” Washer Heads, Decorative)
  • 16-20 1” Brads (or, Paneling Nails)
  • 2 Rubber feet with screws (3/4” x 1” approx.)
  • 1 Guitar String Winder
  • 1 Electronic Note Tuner, optional (Highly Recommended) (For best results, use our Middle C Finder instead of a piano)

Select Wood (You supply)

  • Sides: 2 Pine, single planks, straight, no knots (1” x 10” x 6’)
  • Soundboard: 1 Luan Plywood (2’ x 4’ x 1/8” or ¼”)
  • String Bridge (Guide) Pins: 2 Dowels (3/16” x 4’) (Oak or Poplar)

Tools & Supplies (Not limited to the following) (You supply)
Jig Saw (&/or Band Saw), Circular Saw with guide, Drill or Drill Press (recommended), Various Drill bits, Hammer, File Assorted Clamps, assorted Sand Paper (60/80 to 220 grit), Screw Driver, Scissors Select wood surface finishes (lacquer, varnish, shellac, etc.), 0000 Steel Wool & Lint Free Cloth
(Various Polyurethanes aren’t normally recommended for musical instruments.)

Time to Finish: 24 Hours approximately (Per John Kovac)

Updated String Sizes Document provided only within kits or string sets
26 String Harpune Standard Red C’s

String Diameter Length
1G
2F    Blue
3E
4D
5C     Red
6B
7A
8G
9F   Blue
10E
11D
12C   Red
13B
14A
15G
16F   Blue
17E
18D
19C   Red
20B
21A
22G
23F   Blue
24E
25D
26C   Red

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals