CRASH DATA GROUP CDR Pro Tool Kit User Guide
- October 28, 2023
- CRASH DATA GROUP
Table of Contents
CRASH DATA GROUP CDR Pro Tool Kit
INTRODUCTION
Thank you for your purchase of the CDR Pro Tool Kit. This kit includes all current available hardware for DLC vehicle imaging. It does not include any of the cables or adapters required for direct-to-module (D2M) vehicle imaging – all direct-to-module cables and adapters can be purchased separately on the Crash Data Group website at www.crashdatagroup.com
Included in your CDR Pro Tool Kit you will find
CDR 900 Upgrade Kit
Also Included
Additional information and Video Tutorials
Bosh CDR Tool Support: https://crashdatagroup.com/pages/bosch-edr-
documents-support
Tutorials and How To’s: https://www.youtube.com/channel/UCgOhmWXtM_H-
_d2ELEXFiqA
Getting Started
- Unpack your CDR Pro Tool Kit and check contents.
- Install the current version of the Bosch CDR software. The software and user manual are available as a digital download from the Crash Data Group website.
- Activate your software. You will receive an email from Bosch with an attached .CTF file and instructions for activation.
- Open the CDR software and review the CDR Help File. Help > Bosch CDR Help The CDR Help File includes a comprehensive getting started guide and tutorial for first time users. It also includes Vehicle & Cable Look Up, Collecting Data, Using Collected Data, Software Menu Selection & Toolbars and a Glossary of terms. The Help File is an indispensable tool for the CDR user.
- Install the USB-to-Serial driver program. The link to the most current version is located in the Help File – simply search for “USB”.
- Set-up and register the CDR 900 VCI. Launch your CDR software and select “How to Setup and Register CDR 900” from the “Register a CDR 900 Device” option in the “Setup” menu.
- Practice! If your car or a friends car is supported (check the Help File), try using the CDR Tool on those vehicles. There might not be any crash data or recorded events, but the process is the same and will generate a CDR report.
- The Crash Data Group YouTube channel has many videos on using and setting up the Bosch CDR Tool. Just serach for “Crash Data Group” on www.youtube.com.
www.crashdatagroup.com
(800) 280-7940
crash@crashdatagroup.com
References
- Crash Data Group - EDR Tools, Crash Data Retrieval, CDR – crashdatagroup
- Bosch EDR: Documents & Support – crashdatagroup
Read User Manual Online (PDF format)
Loading......