KETOSCAN Multi Use Breath Analyzer Instruction Manual
- June 9, 2024
- KETOSCAN
Table of Contents
KETOSCAN Multi-Use Breath Analyzer
Precaution
- Do not use water, alcohol or chemicals to clean device, gently wipe with dry cloth or towel.
- The sensor inside the device must be replaced after 300 tests or once a year, whichever comes first.
- The device will lock after 300 tests (while using the device without the mobile app) and 320 tests (while using mobile app). Once this happens, please buy new sensor module from the place of purchase of the device.
- The accuracy of the sensor can diminish if not used for over 6 months. In this case, please buy new sensor module from the place of purchase of the device.
- There can be an influence to the results when drink beverages such as coffee, juice and so on excluding water and eat food or smoking or brushed the teeth (Including mouthwash) within 30 minutes before the measurement.
- Consuming alcohol before testing will affect results, wait at least 24 hours for alcohol to leave your system before testing.
- Consult a specialist or doctor if the test results exceed 80 ppm continuously.
Components
Product Description
How to replace the sensor module
Display Message
-
Breath sampling error
Insufficient breath sample, wait for device and retest. -
Low Battery warning
Charge the device using the provided USB cable. -
Battery charging
Message displayed while battery is charging. -
Charging complete
Message displayed when battery is fully charged. -
Replace Sensor module
Message alert when sensor module needs to be replaced, please buy new sensor module from the placeof purchase of the device. -
Sensor error
Message alert when sensor where sensor is damaged. please contact the place of purchase of the device. -
Bluetooth mode
The device is connected with KETOSCAN app.
How to use
How to Use Deivce Standalone
- Insert the disposable mouthpiece.
- Press and hold the power button for 2 seconds. complete the “‘sensor conditioning test” by waiting for the countdown and blowing into the device to remove anybuilt-up residue. after the OK display appears, proceed to the “main test” after the countdown.
Sensor conditioning test
Main test
What is ‘Sensor conditioning test’?
Sensor conditioning test function is a patented technology for KETOSCAN device. This function will ask you to blow into the device clearing any residue or miscellaneous gases to ensure accuracy, which is followed by the main test.
How to use Mobile Application
- Download app(KETOSCAN) from Google Play (Android) or App Store (ios).
- Turn on Bluetooth and location/GPS on phone.
- While the KETOSCAN Smart device is on, load the mobile app on your phone, press “Pair Ketoscan'”, and select your device from the list.
- Input required information and start testing.
Note
Reattempt after network initialization when there are many connected Bluetooth
devices in case of Android device.
Create your ID& PW to log into the App for the data storage and recall even
when logging on a different mobile device over time.
Level Guide
Note
It is possible to check the level guide at KETOSCAN dedicated app.
Product Specification
- Sensor Type High Resolution acetone gas sensor
- Display Unit PPM (Parts per million)
- Measurement Range 0.0-99 PPM
- Accuracy Less than 5ppm +/-0.5ppm //On or above 5ppm +/-109% This rate is manufacturing-based and may vary depending on your environment in actual use.
- Battery charge cycle More than 50 measurements
- Analyzing Time Within 4 seconds
- Power Charge USB Type-C 5V more than 500mA
- Mouthpiece Provided disposable mouthpiece or 7mm diameter straw
- Sensor module replacement cycle 300 measurements The module is recommended for replacement every 1 year or 300 tests whichever comes first.)
- Storage Temperature 5’C 50°C
- Operational Temperature 10C 40°C
- Certificate US FDA Class 1/KC/ CE/ FCC
- Display 1,44-inch high brightness TFT-LCD
- USB-C type Connector The USB cable is for charging only and does not communicate data.
- Etc. Vibration motor installed for alarm
SENTECH GMI CORP.Hwagok-ro 416, 17F, #1713-1714 Gangseo-gu, Seoul, Republic of
Korea
Tel :+82 2 6929 1310
www.ketoscan.com
sales@sentechgmi.com
FCC compliance information
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference inna residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment. This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
Radiation Exposure Statement : This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 5 mm between the
radiator and your body. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter
Warranty
Limited ONE year warranty Warranty coverage
SENTECH GMI Corp. warrants this product against defects in materials and workmanship under normal use for a period of ONE (1) YEAR from the date of retail purchase by the original end-user purchaser (“Warranty Period”). Except as provided in the preceding sentence or applicable law, SENTECH GMI Corp. provides this product “as is”. Ifa defect arises and a valid claim is received by SENTECH GMI Corp. within the Warranty Period, at its option, SENTECH GMI Corp. will either (1) repair the product, (2) exchange the product with a product that is new or which has been manufactured from new or serviceable used parts and is at least functionally equivalent to the original product, or (3) refund the purchase price of the product. When a refund is given, the product for which the refund is provided must be returned to SENTECH GMI Corp. or Seller and becomes SENTECH GMI Corp. or Seller property. This warranty is limited to the original end-user purchaser and is not transferable to, or enforceable by, any subsequent owner.