MEMOQ SR-600 Wristwatch Type Voice Recorder User Manual

: June 9, 2024
: MEMOQ

MEMOQ SR-600 Wristwatch Type Voice Recorder User Manual

Instructions for use

The product has a built-in battery and can be used after charging.
Charging starts when the product’s USB terminal is connected to the PC’s USB port or a charging adapter (optional)

Caution : Be sure to use a certified charging adapter (rated output DC5V/500mA or higher).
Damage to the product due to a defective charging adapter may result in paid repair.

Charging

Caution :Charging will not start if the USB terminal is connected in the wrong direction

During recording, you can check the remaining battery status according to the battery icon displayed on the watch screen.
When charging is complete, the screen turns off, and you can turn it on again by pressing the recording button.

Connecting PC USB

Caution : Do not connect to the PC USB port or charing adapter(option) when the USB terminal is wet.
Caution : When you separate product from PC, please be sure to perform “hardware safety removal”.
When you remove product from PC by force, fatal error on product can occur.

How to use time setting program

After connecting the product’s USB terminal to the PC’s USB port, run the “TIME SETUP” program stored in the product.
After checking the settings according to the usage environment, click the “START” button.
If the “DATE_TIME.CFG” file is normally created in the product, disconnect the product from the USB port to complete the setting.

Caution : The date and time set on the PC are displayed.
If the date and time are displayed differently, please check the PC settings.
Caution : If the product is not separated immediately after clicking the START button, a time error will occur as much as the delayed time.
Caution : If the product is not separated from the PC after clicking the START button, the setting will not be completed

1. MODE (Record Quality)

Recording sound quality setting.
· PCM(No compression : 705kbps/44.1kHz), XHQ(Ultra high sound quality : 128kbps/32kHz),
HQ(High sound quality : 64kbps/16kHz), SP(Low sound quality : 32kbps/8kHz),
LP(Long time sound quality : 16kbps/8kHz)

2. VOS ON/ OFF

VOS Recording : If there is no sound during recording, the recording pauses, and when sound is heard, the recording resumes.
· VOS OFF ,VOS ON

Tip : Unnecessary silent sections are not recorded, saving listening time and memory usage.
Caution : The battery life is the same regardless of VOS ON/OFF, the difference is that it creates a file by saving only the part where the sound is detected.
Caution : There is a risk that it may not be recorded depending on the volume, we recommend VOS OFF recording for important recordings.

3. VOS LEVEL

Set the volume required to resume recording from a pause during VOS recording
· +2 Very sensitive(About 52dBA), +1 Sensitive (About 55dBA), 0 Normal (About 58dBA), 1 Insensitive(About 61dBA), -2 Very insensitive(About 64dBA)

4. MIC Sens

Set the microphone sensitivit · High sensitivity, Middle sensitivity, Low sensitivity
Tip : When the recording sound is low, set it to the ‘High’, and when the recording sound is loud,
set it to the ‘Low’. Please change it after testing it to match the sound.

5. Scheduled recording

Recording starts automatically once a day at a set time

Start time : Time to start scheduled recording (24-hour system), Minute (60 minutes)
· Duration : Time to continue scheduled recording (1/2/5/10/20 hours)
Caution : VOS recording can’t be used during scheduled recording.
Caution : PCM mode can’t be selected during scheduled recording.
Caution : If the date and time settings are not correct, scheduled recording may malfunction.
Caution : If the battery is low, scheduled recording will not work. Please use it after charging.
Caution : If the scheduled recording set time overlaps during normal recording, the scheduled recording will be ignored.

6.Theme

Set the watch display style

How to record

Turn on the power (start recording)

Press and hold the recording button to turn on the power and recording starts immediately.
If you press the recording button briefly while the watch screen is displayed, the recording detail screen is displayed.
The screen turns off automatically after about 20 seconds.
To turn on the screen again, you can display the watch screen by briefly pressing the recording button.

Turn off the power (End recording)

Recorded files are created sequentially from R-00001 in the Voice folder, and up to 9,999 files can be created.
It is saved in R-00001_2201011200 (YY/MM/DD/HH/MM) format, and the file names are classified according to
Normal Recording (REC)/VOS Recording (VOS)/Scheduled Recording (SCHED

Ex)

R-00001_2201011200_VOS.MP3 (VOS recording)
R-00001_2201011200_REC.MP3 (Normal recording)
R-00001_2201011200_SCHED.MP3 (Scheduled recording)

Caution : If the battery is discharged, the set date & time will be reset to 00:00 on January 01, please use it after resetting it after charging.
Caution : If the watch strap and the body are not properly installed, the microphone hole may be covered and the microphone sensitivity may deteriorate.
Caution : If water or foreign matter gets into the microphone hole, the sound may become low or recording may not be possible. Always dry and clean before use.

Specifications

Model	SR-600
Memory	8 GB

Recording time

Hours of battery use

| | About 27 hours

|

About 33 hours

Warranty Card

Product name	Voice Recordeer
Model No.	SR-600
Purchasing Date
Purchasing Place
Telephone No
Others
Warranty period	1 Year
Customer	Name
Address
Telephone

Paid service

Defect caused by careless
Defect caused by user’s internal
Defect caused by natural disasters like fire, salt damage, flood, earthquake,
Defect out of warranty

If parts need to be replaced

Cautions in use

We are not responsible for the loss of recordings caused by wrong usage, A/S, other
We are not responsible for the damage or third party’s claims caused by the usage of this
Disassembly, remodeling, impact, the usage in place of low temperature, high temperature, high humidity can be the cause of Please save the important recordings into PC frequently.

Water resistance

This product supports water resistance
For normal use of water resistance, read the following carefully.
Failure to comply with the following may result in damage to the product or no performance guarantees.
Avoid exposure to contaminated water, chemicals etc.
Do not use products when diving or water sports.
Don’t put excessive water pressure on the product. (For example, water from a faucet)
If the product is damaged or damaged by an external impact, the water resistance may deteriorate.
Don’t take it apart yourself. Damage to the water resistance may occur.
If the product is submerged or the microphone is wet, smooth operation may be difficult.
Dry the product completely before using it.

Name of each part & components

Recording sign
Main
body
Watch strap
Battery Indicator
Recording button
Watch strap
Microphone hole
Watch screen
Day and date display
USB terminal

Installing and separating the watch strap

※Install the main body to watch strap Push the front of the main body from bottom to top and install it to the watch strap.
※Separate the main body from watch strap. Push the front of the main body outwards the watch strap to separate the product from the watch strap to connect it to PC.