Shenzhen Xindaxing Electronic Technology YYM806M Aroma Diffuser Instruction Manual
- June 4, 2024
- Shenzhen Xindaxing Electronic Technology
Table of Contents
Aroma Diffuser
Instruction Manual
Tips: Please read the instruction manual of this product carefully before
use and keep it properly.
The aroma diffuser adopts the principle of ultrasonic waves to atomize the
water and essential oils in the water tank to produce a cool, moist, and
aromatic mist.
Product specification parameters
| Item No | YYM806M | YYM816 |
|---|---|---|
| Product Size | 120x160mm | 120x150mm |
| Product Net Weight | Approx 220g | Approx 240g |
| Material | PP/ABS/PC | PP/ABS/PC |
| Time model | 1 H/3H/6H/ON | |
| --- | --- | |
| Tank capacity | 180nnL | |
| LED color | seven kinds of color | |
| Output | DC5V 800mA(supports PC—USB) | |
| Accessory | Power cord |
Resonant
frequency| 3 MHz ultrasonic wave
The amount of mist output| Approx 25mL/H
Basic operation
- Place the aroma diffuser on a flat surface and remove the cover, then connect the adapter to the DC socket.
- Put the water into the cup container first, and then pour the water into the water tank of the aroma diffuser. If you need fragrance, you can put a few drops of essential oil in the water tank.
- Close the water tank cover and connect the AC adapter to the AC socket.
- Switch button: turn on the spray, which can be timed (1H- 3H-6H-ON continuous spray-off), Long press to turn off the spray.
- Light button: Colorful night light button, set the color of the colorful night light you want (gradient-bright-dark bright). Long press to turn off the night light.
Note
- When the water is completely atomized, the aroma diffuser will automatically shut down.
- It is recommended to use purified water or distilled water. Note that the maximum water level of the water tank cannot exceed 180 ml.
- Pay attention to the direction when pouring water to prevent water from flowing into the air outlet.
- The aroma diffuser must be used on a flat surface, away from heat sources, and in a humid environment.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>