hama 00137239 Power Strip Instruction Manual
- June 9, 2024
- Hama
Table of Contents
00137239 Power Strip
Instruction Manual
Power Strip
Steckdosenleiste
00 137239
Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely.
Please keep these instructions in a safe place for future reference. If you
sell the device, please pass these operating instructions on to the new
owner.
- Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Package Contents
- Power Strip
- These operating instructions
Safety Notes
- The product is intended for private, non-commercial use only.
- The product is intended for indoor use only.
- Use the product for its intended purpose only.
- Children are not permitted to play with the device.
- Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
- The product may only be operated with the type of power supply network described on the name plate.
- Only connect the product to a socket that has been approved for the device. The electrical socket must always be easily accessible.
- The overvoltage protector may be operated only on a 16 A fused mains socket with a properly installed protective conductor.
- Do not connect to extension cables, power strips or adapters.
- Lay all cables so that they do not pose a tripping hazard.
- Do not bend or crush the cable.
- Never connect multiple units of this product in series.
- Disconnect the product from the network using the power button – if this is not available, unplug the power cord from the socket.
- Always pull directly on the plug when disconnecting the cable, never on the cable itself.
- Do not continue to operate the device if it becomes visibly damaged.
- Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
- If the device is used commercially, increased duty of care requirements apply.
- Therefore, please observe the accident prevention regulations of the German employer’s liability insurance association for electrical systems and equipment. Please also observe all accident prevention regulations from other applicable employer’s liability insurance associations and accident insurance companies, as well as any legal regulations applicable to the particular industry and/or location.
Proper use
The built-in overvoltage protector is designed for mains-related overvoltage caused by switching processes or distant lightning strikes. Additional measures must be taken to safeguard against direct lightning strikes. Coarse protection (requirement clause) must be provided for in the building’s electrical system. The primary intended purpose of the product is to protect high-quality telephone and computer systems and audio, video and satellite devices.
Connection
All devices must be switched off before devices can be connected. The overvoltage protector may be connected only between the electrical consumer and an earthed socket. In the operational state, the indicator light for the overvoltage protector lights up.
Warning
If the indicator light is not lit after switching on, the overvoltage
protector is defective – it may no onger be used and must be exchanged for a
new overvoltage protector.
Care and Maintenance
- Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.
- Make sure that water does not get into the product
Warranty Disclaimer
Hama GmbH & Co. KG assumes no liability and provides no warranty for damage
resulting from improper installation/mounting, improper use of the product or
from failure to observe the operating instructions and/or safety notes.
Insurance cover of 20 million euros
Our product liability insurance provides cover of up to 20 million euros for
personal injury and damage to property. The prerequisites are proper product
use (please note the safety information) and proof that the damage is
attributable to non-compliance with the described protective function (please
see the technical specifications on the type plate and inthese operating
instructions).
Service and Support
Please contact Hama Product Consulting if you have any questions about this
product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com
Technical Data
| Overvoltage protection | Up= 1,8 kV/ Uc= 250 V~ /Uoc= 3 kV/ Typ III |
|---|---|
| Total leakage current | 13,500 A (3 x 4,500 A) |
| Cable length | 1,4 m |
| Mains supply | 20-240 V / 50-60 Hz / 16 A |
| Cable crosssectional area | 1,5 mm² |
| Connected load |
Recycling Information
Note on environmental protection:
After the implementation of the European Directive 2012/19/EU and 2006/66/EU
in the national legal system, the following applies: Electric and electronic
devices as well as batteries must not be disposed of with household waste.
Consumers are obliged by law to return electrical and electronic devices as
well as batteries at the end of their service lives to the public collecting
points set up for this purpose or point of sale. Details to this are defined
by the national law of the respective country. This symbol on the product,
the instruction manual or the package indicates that a product is subject to
these regulations. By recycling, reusing the materials or other forms of
utilising old devices/Batteries, you are making an important contribution to
protecting our environment.
Hama GmbH & Co KG
86652 Monheim / Germany
www.hama.com
All listed brands are trademarks of the corresponding companies. Errors and
omissions excepted,
and subject to technical changes. Our general terms of delivery and payment
are applied.
00137239/08.16
Documents / Resources
| hama
00137239 Power
Strip
[pdf] Instruction Manual
00137239 Power Strip, 00137239, Power Strip, Strip
---|---
| hama
00137239 Power
Strip
[pdf] User Manual
00137239 Power Strip, 00137239, Power Strip, Strip