POSEAG Bluetooth 5.2 Neckband Headphones Around The Neck Bluetooth Earphones User Instructions
- June 4, 2024
- POSEAG
Table of Contents
POSEAG
POSEAG Bluetooth 5.2 Neckband Headphones Around The Neck Bluetooth
Earphones
Specifications
- BRAND : POSEAG
- FORM FACTOR : In Ear
- NOISE CONTROL : Sound Isolation
- HEADPHONES JACK : USB
- CABLE FEATURE : Without Cable
- BLUETOOTH VERSION : 5.2
- WIRELESS RANGE : ＞10m (33ft)
- PLAYTIME : ＞30H
- CHARGING TIME : 1H
- WATERPROOF : (IPX7)
- CONTROL TYPE : Button Control
- COMPATIBLE SYSTEM : iOS, Android, Windows
- EARTIPS : 4 pairs (XS/S/M/L)
Introduction
You may play the POSEAG neckband Bluetooth headphones for 30 hours. Additionally featuring USB-C fast charging technology, a 10-minute charge may provide around 10 hours of use. These neckband headsets improve your phone call experience with built-in noise-cancelling microphones for clear calls. With the simple press of a button, you may also accept, end, reject, redial, and mute calls. To provide you more wearing alternatives, these Bluetooth neck headphones come with soft silicone eartips in 4 sizes. Even while practising yoga or exercise, they won’t come off easy.
Additionally, the magnetic construction makes it easier to store them and keeps them from slipping off. Bluetooth 5.2 technology is cutting-edge. To provide you with a faster and more reliable connection, our Bluetooth neckband headphones are outfitted with the most cutting-edge Bluetooth technology. The silicone coating on the neckband earphones makes them lightweight, comfortable, and waterproof, improving your sports experience.
PACKING LIST
DIAGRAM
HOW TO PAIR
FIRST USE
- Tum on the Bluetooth function on your phone
- Power it on, then it will enter the pairing mode automatically. Red and blue lights will start flashing alternately with the voice “Pairing”
- Search for the Bluetooth devices and select Flexus NET”[Enter the code 0000″ if needed)
- When pairing is successful, you will hear the voice “Connected”
PAIR TO ANOTHER DEVICE
- In the state of shut-down. Press and hold on to the MFB button for 5-7 seconds or so. Do not release it until the red and blue lights start flashing alternately with the voice “Pairing
- The rest goes the same as above.
POWER ON/OFF
PLAY/PAUSE/ANSWER/HANG UP/ACTIVATE SIRI/REJECT/REDIAL
VOLUME CONTROL/MUSIC CONTROL
CHARGE BATTERY
MUTE
CORRECT DISPOSAL OF THIS PRODUCT
(Waste Electrical& Electronic Equipment)
This Marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal., please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product or their local government office. For details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the items and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal
FCC STATEMENT
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FOC Rules. Operation is subjected to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received. including interference that may cause undesired operation.
FCC RADIATION EXPOSURE STATEMENT
This equipment compels with FOC radiation exposure limits set forth for an uncontrolled environment.
NOTIFICATION
- Please fully charge it if it was going to lay idle for a long time and place it in a cold and dry place. Please recharge it each 2 months for storage.
- Please fully charge it for the first use
Frequently Asked Questions
How can I tell when the battery in my neckband is full?
It often has a red charging indicator light. The battery is fully charged when the light goes off, indicating. You must learn how to charge a Bluetooth headset properly, that is, just when the battery is running low, if you want to get the most life out of it.
Why won’t my phone and Bluetooth headphones pair?
If your Bluetooth devices aren’t connecting, they probably aren’t in pairing mode or are out of range. Try rebooting your devices or letting your phone or tablet “forget” the connection if you’re experiencing persistent Bluetooth connection issues.
How do I restore the factory settings on my headphones?
Remove the headphones’ charging cable from the device. For 10 seconds, press and hold the power button. When the LED light starts to blink, your headphones have been successfully reset.
Why do my headphones only work on one side?
On the menu, select [Accessibility] by scrolling down. Tap [Hearing improvements] after that. A toggle switch for [Mono audio] will be visible. Make sure [Off] is selected on the toggle switch.
Describe pairing mode.
Bluetooth pairing is a method of registering information to link devices. They can connect by exchanging information about their devices (pairing). A Bluetooth device must first be paired with another Bluetooth device before it can be used. Comparable to sharing phone numbers is pairing.
Why is my phone having trouble identifying my headphones?
Tap Connected devices > Connection options > Bluetooth after opening Settings. Unpair any Bluetooth audio devices that are already paired with your phone or turn the Bluetooth switch to Off. To test whether your headphones are functional, plug them into the audio jack and play something.
What is the Bluetooth pairing passcode?
When partnering with another Bluetooth® device, use the code 0000. Depending on the Bluetooth device being used, the passcode may display as Pass key, PIN code, PIN number, or Password.
How can I tell whether my earbuds have enough power?
Bluetooth headsets all function differently. However, once your headsets have reached full charge, the earbuds usually start to glow. Red and green lights are most frequently used in headsets. A low battery level is indicated by the red light, while a full charge is indicated by the green light.
How do I get my Bluetooth headphones to stop indicating low battery?
To view the system apps, click “Show system” and then open Apps Info. Find “System UI” and click it. It will then show the Notifications option. If the low battery alarm is selected, clicking the check box next to “Battery” will enable notifications to be turned off.
How much juice am I carrying?
Open the Settings app on your phone. View your remaining charge and estimated battery life under “Battery.” To learn more, select Battery.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>