Godox EM68 RGB USB Microphone Instruction Manual

Godox EM68 RGB USB Microphone

Foreword

Thank you for purchasing!
EM68 is a professional e-sports microphone with RGB colorful light. Accurate touching sensible mute button can easily deal with accidental noises. Convenient light effect button allows switch among various light effect modes by simply pressing it. It is quite suitable for e-sports, live streaming and indoor interview.
Please read this manual carefully before using to make sure the correct operation and exert the optimum function.

Main Feature

• Touching sensible mute button on the top
• Light effect button freely switches light effect modes
• Auto-sensible and workable after connecting to PC with Type-C data cable
• Attached shock-absorbing bracket makes it placeable and stable

Warning

• This product is high-precision instrument, please avoid falling, collision or pounding.
• Do not disassemble. Should repairs become necessary, this product must be sent to our Company  or an authorized maintenance center.
• Always keep this product dry. Do not use in rain or damp conditions.
• Do not leave or store this product in the environment of direct sunlight, near heating devices, or in hot, humid or dusty.
• Keep out of reach of children.
• Do not use in flammable and explosive environments. Pay attention to the relevant warning signs.
• Do not leave or store the product if the ambient temperature reads over 50°(
• Please read carefully and follow the warnings or instructions provided by the manufacturer

Structure of Product

Dimension of Product

What’s in the Box

• Microphone xl
• Shock-absorbing Bracketx1
• Power Cablexl
• Cable Tie xl
• Instruction Manualxl

Frequency Response

Directivity

Operating Instruction

Mute Button
Connect the microphone to PC with the Type-C data cable, the mute mode is off by default, the light effect is turned on, and the microphone works normally. Slightly touch the mute button on the top, then the mute mode is on, the light effect is turned off, and the microphone can’t pick up the sound.
Light Effect Button
Short press the light effect button to switch between monochrome breathing mode and monochrome gradient mode.
Monochrome breathing mode: Press to switch among breathing modes of 7 colors (red, magenta, blue, cyan, green, yellow, white), the brightness will change gradually from bright to dim. Monochrome gradient mode: Display the above 7 colors respectively, the brightness gradually changes from bright to dim.
Type-C Port
Connect the microphone to the WinPC/Mac OS system with Type-C data cable, it will automatically recognize and start working.

Technical Data

Maintenance

Avoid falling !
Strong collision or vibration may malfunction the device.
Keep dry!
This product is not water-proof. Malfunction, rust, and corrosion may occur and go beyond repair if soaked in water or exposed to high humidity
Avoid sudden temperature changes !
Condensation happens in sudden temperature changes such as the circumstance when taking the product out of a building with higher temperature to outside in winter. Please put the product in a handbag or plastic bag beforehand
Keep away from strong magnetic field !
The strong static or magnetic field produced by devices such as radio transmitters leads to malfunction

Declaration of Conformity

GODOX Photo Equipment Co.,Ltd. hereby declares that the This equipment are in compliance with the essential requirements and other relevant provisions of EU Directive 2014/35/EU, 2014/30/EU. They are allowed to be used in all EU member states.
For more information of Doc, Please click this web link:http://www.godox.com/DOC/GodoxEM68 DOC.pdf

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation
   Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Warranty

Dear customers, as this warrantycard is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you!

( Applicable Products )
The document applies to the products listed on the Product Maintenance information (see below for further information). Other products or accessories (e.g. promotional items, giveaways and additional accessories attached. Etc.) are not included in this warranty scope.
( Warranty Period )
The warranty period of products and accessories is implemented according to the relevant Product Maintenance Information. The warranty period is calculated from the day(purchase date) when the product is bought for the first time, and the purchase date is considered as the date registered on the warranty card when buying the product.
( How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.
( Inapplicable Cases )
The guarantee and service offered by this document are not applicable in the following cases:

1. The product or accessory has expired its warranty period;
2. Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc;
3. Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment;
4. The original identifying information of product or accessory is modified, alternated, or removed;
5. No valid warranty card;
6. Breakage or damage caused by using illegally authorized, nonstandard or non-public released software;
7. Breakage or damage caused by force majeure or accident;
8. Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope.

Maintenance and Service Support Information
The warranty period and service types of products are implemented according to the following Product Maintenance Information:

Product Type| Name| Maintenance Period(month)| Warranty Service Type
---|---|---|---
Parts| Product Main Body| 12| Customer sends the product to designated site
Battery| | Customer sends the product to designated site
Charger, Power Cable. Sync Cable, Electrical Parts etc.| 12| Customer sends the product to designated site
Other Items| Battery Case, Windscreen Foam, Wind Cap,
Locking Device, Lanyard, Tie, Velcro Tape, Clip, Bag, Package etc.| No| Without warranty

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>