DOSMONO C406 2.4G Wireless Smart Mouse User Manual
- June 9, 2024
- DOSMONO
Table of Contents
C406 2.4G Wireless Smart Mouse
User Manual
Al voice mouse
Product introduction
Al voice mouse is a wireless mouse built-in voice input, voice translation, and voice search, which supports 112 languages voice typing and 112 languages translation.
Hardware installation
- Take out the USB signal receiver under the back of the mouse and insert i t into the USB interface of Desktop computer / laptop computer / TV box.
- While holding down the left and right mouse buttons, set the switch on the back to “ON” ,then match the computer).
- The mouse automatically recognizes and installs the hardware driver. After installation, the left button, right mouse button, wheel button can be used.
Remark : If the mouse can’t work and the light sensor flashes quickly, it may be caused by the battery is dead, please charge it as soon.
Software Installation
- Press and hold the wheel button for more than 5 seconds, the computer will automatically open the software download URL in the browser, and select the corresponding software according to the corresponding version of the computer.
- After downloading, follow the prompts to install.then you can use it.
Precautions
-
The mouse currently supports WIN7, WIN8, WIN10,XP system and MAC system.
-
When replacing the mouse on the same computer, after the hardware driver is installed, double-click the software program icon to use the mouse normally.
-
The software o f the mouse may be updated sometimes.
If the mouse couldn’ t work normally, try to uninstall the computer software program and reinstall the software program to use it. -
Download the voice mouse software from http://www.dosmono.corehold.com/index.php
-
After the software is downloaded and installed, please run the program. When the icon in the lower right corner of the screen is colored, it means that the program is running normally.When it is gray, please proceed as follows:
(1) Please check i f the USB receiver is plugged in.
(2) Please try running the application again. -
This mouse supports 112 languages voice typing and voice translation: Mandarin, English, Cantonese, Japanese, Korean,Russian, French, Spanish, Arabic, ortuguese, Bulgarian,Czech, Danish, German, Greek, Estonian,Finnish, Hungarian, Indonesian, Italian, Latin, Dutch, Romanian, Slovenian, Polish, Swedish, Thai, Malay, Vietnamese,etc.
-
1f the program is blocked by security software (360 or Kingsoft Internet Security, etc.)Installation or accidental blocking, please close the anti-virus software and re- install. It is recommended that you add the in stallation program to the white list.
Operating instructions
Al intelligent voice mouse supports XP, Windows or MAC system computer.
Voice typing
In the editable text area of Word, Notepad and other software, press and hold
the voice typing button, and then say the text you want to enter.
Voice assistant
Long press the voice assistant key to say the operation command, such as “Open
My Computer”,”What’s the Weather like today in Shenzhen’, etc .Voice assistant
can be used on any interface.
Voice translation
In the editable text are a of software such as Word and Notepad, press and
hold the voice translation key, and then enter the text to be translated by
voice.
Software use
Right-click the mouse software icon in the lower right corner of the screen to
open the software main interface, and you can personalize the application and
mouse functions.
WARNING!
It is forbidden to disassemble, hit squeeze or throw into fire. If severe
swell- ing occurs, do not continue to use it. Do not place it in a high
temperature environ- ment. Do not use the battery after it is immersed in
water.Only dedicated chargers can be used.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>