Quictent 20×40 Foot Tent Instruction Manual
- June 12, 2024
- Quictent
Table of Contents
20×40 Foot Tent
Instruction Manual Assembling Instructions
For 20×40 foot Tent (6x12m)
20×40 Foot Tent
1| 1870mm| foot pole| 14pes| | B| | 4-connector| 15pcs
---|---|---|---|---|---|---|---|---
2| 1870mm| roof pole| 32pcs| | C’| | Earth pin| 36pcs
3| 1325mm| roof pole| 14pes| | D| | Nylon cable ties| 240pcs
A| | 3-connector| 6pcs| | E| | Rope 8m| 4pcs
- Before install your tent please prepare gloves to Avoid the anti-rust oil on the tubes surface.
- Recommended to have 6-8 people to assemble tent to avoid damage
- Now completely unpack tent from all boxes and inspect all pieces compare to above parts list
Step 1 Assembly of roof structure
– Use tube #2 and #3, connector A and B to set up the roof structure
– Need to make sure that the hole in the longer end of the connector is
pointed downward for connection to the foot pole
– #3 poles are shrinkable on one end, the shrinkable end should connect with
connector A or B, and one side of #2 pole should slide into the #3 pole, and
the other side of #2 pole connect with connector A or B.
Step 2 Cover the canopy
– unfold canopy and put over roof frame structure
– use nylon cable ties “D” to connect canopy and frame on front and back, when
the tent stand up, both roof sides are too high to reach
Step 3 Set up the tent
– with a person at each pole connector on one side of the roof structure, lift
the roof structure and insert #1 pole into the pole connector, allow structure
to be supported by the foot poles. Move to the opposite side of the roof
structure to
install other foot poles.
– To secure the roof cover with nylon cable ties “D”
– To secure the tent with earth pins “C” in each foot poles and ropes in 4
corners of the tent
Step 4 Install sidewalls as needed
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>