Qijun Toys Industry 1836-1-2-3 Infrared Sensing Remote Control Tank Instructions
- June 9, 2024
- Qijun Toys Industry
Table of Contents
- Qijun Toys Industry 1836-1-2-3 Infrared Sensing Remote Control Tank
- Parts List
- Battery Installation Instructions
- Function Introduce
- Charge Instructions
- Function Instructions
- lnfrared Sensing Mode
- RE MARK
- FCC Compliance Statements
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Qijun Toys Industry 1836-1-2-3 Infrared Sensing Remote Control Tank
Parts List
Battery Installation Instructions
Remote Control:
- please use a screwdriver to loosen the screws on the battery cover and open it.
- please put 2pcs 1.5V AA battery according positive and negative into the battery holder.
- close the battery cover and tighten the screws
RC Tank:
- Please open the battery cover on vehicle bottom, connect the built-in battery into the power interface and put into the batter holder.
- close the cover and tighten the screws.
Function Introduce
Charge Instructions
- Before use the new battery, please charge it.
- connect the bettery and the charger, then plug the charger into the socket.(As shown in figure 1)
- fully charged need 90-150 minute. There have indicator light on the charging plug, the red light on and green light flash when charging,the green light on and red light off once fully charged. don’t over charge, this couldn’t increase the electric quantity.
- Check the toys, batteries, charging wires and plugs regularly. If any of these accessories is damaged, stop using them until they are repaired or replaced
Function Instructions
Frequency connection: Put the power switch of vehicle to “ON”, the light flash slowly and the vehicle into frequency connection model; and press the switch button of the remote control at the same time, frequency connection succeed. The vehicle default drive modle, the function can be normal control.
Power
Music Switch
| Press the power bey of remote control,the indicator light flash and remote
control enters the frequency connection modle.ln drive mode, short press the
button, on/off music.
---|---
Forward Backward| Press the forward button of keyboard, vehicle
drives forward; press backward key, the vehicle drives backward; long press
the button, the vehicle keep drives forward or backward.
Sidle Left Sidle Right| Press the “sidle left” button of
keyboard, the vehicle sidle to the left;and press the “sidle right” button,it
sidle to the right.
Switc h ing Mode| Press the button.vehicle switch mode of
tank rotation or turret diversion.
Tank Rotation Turret Diversion
| In the mode of tank rotation.twist the button to right, vehicle rotate to the right;twist the button to left, vehicle rotate to the left In the mode of turret diversion, twist the button to right, turret tum to the right of 180°;
twist the button to left,turret tum to the left of 180°.
Turret Shooting| Press the button to start function of turret
shooting. Eva bullet turret shooting eva bullet.water bullet turret shooting
water bullet,bubble turret spray bubble.Press and hold the button, turret
continuous fire.
In frared Emission Button| In the mode of infrared sensing,
press and hold the key to emitting infrared ray (full function please refer
diagrams of “six.Infrared sensing mode”).
One Ki De mo Music witch| Press the button, vehicle into one
key demo mode and play music(ensure music has open),press the button again to
switch music and only press other button could exit the automatic demo mode.
lnfrared Sensing Mode
- Press and hold the infrared emission button, And send infrared rays in the direction of Sensor 1, vehicle will follow the light and drives forward.
- Press and hold the infrared emission button, and send infrared rays in the direction of sensor 2, vehicle will follow the light and drives backward.
- Press and hold the infrared emission button, and send infrared rays in the direction of sensor 3, vehicle will follow the light and sidle to right.
- Press and hold the infrared emission button, and send infrared rays in the direction of sensor 4, vehicle will follow the light and sidle to left.
- Press and hold the infrared emission button, and send infrared rays in the direction of sensor 5, vehicle will follow the light and turn right.
- Press And Hold The Infrared Emission Button, And Send Infrared Rays In The Direction Of Sensor 6, Vehicle Will Follow The Light And Turn Left.
RE MARK
- when the distance between infrared ray spot and sensor is 30-50cm, the induction control effect should be the best
- under the infrared sensing mode,there has no functions if you want to operate other keys of the remote control. And release the infrared emission button to exit the infrared sensing mode.
FCC Compliance Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment