BISSELL 3649 SERIES CrossWave HF3 Cordless Multi Surface Wet Dry Vac User Manual

BISSELL 3649 SERIES CrossWave HF3 Cordless Multi Surface Wet Dry Vac

Meet your new BISSELL product!
Go to support.BISSELL.ca for a comprehensive walkthrough of your new purchase, including videos, tips, support, and more. Want to get started right away? This guide has all the information you need to set up your new product. Let’s take a loo

Product Overview

1. Clean-Out Cycle Button
2. Mode Button
3. Power Button
4. Clean Water Tank
5. Dirty Water Tank Release Button
6. Dirty Water Tank
7. Brush Roll Window

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING YOUR APPLIANCE.
When using an electrical appliance, basic precautions should be observed, including the following:

WARNING

• Unplug from electrical socket when not in use, before cleaning maintaining or servicing the appliance.
• Use indoors only.
• Do not immerse. Use only on hard floor surfaces moistened by cleaning process.
• Use only cleaning products intended for use with this appliance to prevent internal component damage. See the Cleaning Formulas section of this guide.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Do not use for any purpose other than described in this user guide. Use only manufacturer’s recommended attachments.
• Do not charge with damaged cable or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors or dropped into water, have it repaired by a qualified technician.
• Do not pull or carry by cord, use cord as a handle, close door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts of the appliance and its accessories.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.) or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without filters in place.
• Risk of injury from moving parts. Brush roll may start unexpectedly. Turn OFF before cleaning or servicing.
• Turn OFF all controls, including the Power Switch and disconnect charger from electrical outlet before making any adjustments, performing maintenance, troubleshooting, changing accessories or storing appliance. Such preventative safety measures reduce the risk of starting the appliance accidentally.
• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Use only with Shi Ying Yuan SAW15A-260-0500UD charger or Yinli YLJXA-T260050 charger.
• Battery pack, charging port on the appliance and charger output are not to be short-circuited.
• Do not use appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
• Do not expose battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 130°C/265°F may cause explosion.
• Follow all charging instructions and do not charge the appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
• Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
• Do not modify or attempt to repair the appliance except as indicated in the instructions for use or care.
• Keep the temperature range of between 4- 40°C/40-104°F when charging battery, storing unit or during use.
• Do not charge the machine outdoors.
• Do not turn your appliance ON until you are familiar with all instructions and operating procedures.
• This appliance contains batteries that are non-replaceable.
• Do not incinerate the appliance even if it is severely damaged. The batteries can explode in a fire.
• The battery must be removed from the appliance before it is scrapped.
• Keep appliance on a level surface.
• Do not use appliance in an enclosed space filled with vapors given off by oil-based paint, paint thinner, some moth-proofing substances, flammable dust, or other explosive or toxic vapors.
• Do not use to pick up toxic material (chorine bleach, ammonia, drain cleaner, etc.)
• Do not pick up hard or sharp objects such as glass, nails, screws, coins, etc.
• Plastic film can be dangerous. To avoid danger of suffocation, keep away from children.

What’s in the Box

User Interface

1. Water Spray Rate Indicator
2. Brush Roll Obstruction Indicator
3. Dirty Water Tank Full/Missing Indicator
4. Error Indicator
5. Battery Level Indicator
6. Power Activation Switch (machine must be reclined)
7. Water Spray Rate Selection Button
8. Self-Cleaning Cycle Activation Switch

Assembly & Charging the Battery

1. Firmly insert the handle into body of machine until it clicks into place.
2. Plug charging adapter into docking station.
3. Plug the adapter into wall outlet.
4. Place on the docking station to charge.
5. Fully charge machine before first use. Battery icon lights will indicate charge.

Filling the Clean Water Tank

Keep plenty of CrossWave® formulas on hand so you can clean whenever it fits your schedule. Only use CrossWave formulas in your machine. Other formulas or household cleaners may harm the machine. Do not use hard floor formula on area rugs or carpet.

1. Choose your formula.* Scan the QR code with your smartphone camera or visit BISSELL.ca for formulas.
2. The clean water tank is the top tank on the front of the machine. Press down on the button at the top of the tank and pull to remove.
3.  Lift the flap and hold open.
4. Add warm (140°F/60°C max) tap water as indicated by the fill line on the tank.
5. Add BISSELL formula as indicated by the fill lines on the tank.
6. Release flap and press into place. Insert tank by lining up bottom edge and pressing until it clicks into place.

Cleaning Your Floors

1. Recline the machine. Press the power button ON.
   Note: The unit must be reclined before power button will activate.

2. Press the WATER FLOW button to switch between LO and HI Modes.

   • LO Mode: Blue light solid
   • HI Mode: Blue light solid

3. Solution will dispense automatically. Make forward and backward passes to clean your floors.

4. The dirty water tank indicator will flash red when tank is full or removed.

5. Turn the machine OFF by pressing the power button and return machine to the upright position.

Using the Self-Cleaning Cycle

1. Place the machine on the docking station. Make sure there is cleaning formula in the clean water tank and the dirty water tank is empty.
2. Press the self-cleaning button to start the cycle. The button light will pulse while cycle is running.
3. Once complete, remove the brush roll to dry. See “After-Cleaning Care” for instructions.

After-Cleaning Care

1. Empty the dirty water tank. To remove, press the button on the top of the tank, grab the front handle and pull tank out.

2. Hold the top of the tank near the sides of the filter and pull up to remove.

3. Use the strainer on the clean-out brush to strain debris out of dirty water while pouring into a utility sink or similar waste water receptacle. Dispose of debris in trash and rinse the tank.

4.  Remove the pleated filter from the top of the tank by pulling up.

5. Wash filters with warm water and mild detergent. Rinse the bottom of the tank cover. Note: Filters must be completely dry before reinstalling.

6. Remove the brush roll cover.

7.  Pull the brush roll tab to remove. Pull the yellow tab of the brush roll filter to remove.

8. The brush roll, window and brush roll filter can be hand washed. Use the cleaning tool to scrub parts.

9. Use the hook on the cleaning tool to remove hair and debris from brush roll.

10. Remove the machine from the dock and wipe out the tray.

11. Leave all parts out to dry before reassembling.

12. Place the end of the brush into the left side of the foot. Press the tab of the brush down so it locks into place.

13. Replace the brush roll window by aligning window with foot. Press the window down until it clicks into place.

14. Reassemble the dirty water tank.
    Note: Filters must be completely dry before reinstalling.

15. Insert the bottom of the tank first. Pivot the top toward the machine until it clicks into place.

Storing Your Machine
Store your machine in a protected, dry area. Since this product uses water, it must not be stored where there is danger of freezing. Freezing will damage internal components and may void the warranty.
NOTICE To reduce the risk of a leaking condition, do not store machine where freezing may occur. Damage to internal components may result.
WARNING To reduce the risk of fi re, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting on the dock.

Troubleshooting

Below are some of the issues you may run into. If you don’t see the issue you’re experiencing below, visit support.BISSELL.ca or contact Consumer Care.

WARNING To reduce the risk of fi re, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting on the dock.

Warranty

Limited 18-month warranty. Visit support.BISSELL.ca or call 1-800-263-2535 for complete warranty information.

NOTICE Disconnecting the battery will destroy the appliance and invalidate the warranty.

Every Purchase Saves Pets™

BISSELL proudly supports BISSELL Pet Foundation® and its mission to help save homeless pets. When you buy a BISSELL® product, you help save pets, too. We’re proud to design products that help make pet messes, odours and pet homelessness disappear. Visit BISSELLsavespets.ca to learn more.

References

• BISSELL® | Vacuum Cleaner, Carpet Cleaner, Steam Cleaner and Parts
• Our Pet Focus | Learn About BISSELL® Pet Initiatives
• Support Home Page
• Support Home Page
• Call2Recycle | Leading the Charge For Battery Recycling

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>