hama 00200133 USB C Multiport Laptop Docking Station Instruction Manual
- June 4, 2024
- Hama
Table of Contents
hama 00200133 USB C Multiport Laptop Docking Station
INSTRUCTION
The maximum supported Resolution
Operating instruction
Package Contents
- USB-C Multiport
- These operating instructions
Safety Notes
- Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
- Do not open the device or continue to operate it if it becomes damaged.
- Do not operate the product outside the power limits given in the specifications.
- Do not modify the product in any way. Doing so voids the warranty.
- Keep this product, as all electrical products, out of the reach of children!Use the product for its intended purpose only.
- Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
- The product is intended for indoor use only.
- Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
- Do not use the product in moist environments and avoid splashes.
- Do not use the product in areas where the use of electronic devices is not permitted.
- Do not drop the product and do not expose it to any major shocks.
- Dispose of packaging material immediately according to locally applicable regulations.
Warning
- Find out the maximum output current capacity of the USB port on your device. To do this, consult the operating instructions or ask the manufacturer.
- Common values are 500 mA for USB-A 2.0, 900 mA for USB-A 3.0, and up to 3000 mA for USB-C.
- Ensure that the cumulative current draw of all USB devices connected to the hub/multiport adaptor does not exceed this value.
Note
- To be able to use the charging function, the device must support Power Delivery (PD) or Thunderbolt-3/4.
- To be able to use the VGA or HDMI™ function, the device must support DisplayPort Alternate Mode or Thunderbolt-3/4.
- VGA & HDMI™2, or HDMI™1 and HDMI™2: MST (Multi-Stream Transport) support for simultaneous use of two monitors displaying different contents.
- Passive VGA/HDMI™ cables (without chipset / signal converter) must be used for MST.
- The MST function is dependent on the graphics card, operating system and monitor used. For more information, consult the operating instructions or contact the manufacturer.
- The MacBook must have an Intel, M1 Pro, M1 Max, M2 processor (CPU). The Apple M1 chip does not support MST!
Startup and Operation
- Switch on your computer and boot the system.
- Connect the product to two free USB ports on your computer.
- You do not have to install drivers; the computer will automatically recognise the product.
- If necessary, follow the instructions for your operating system.
- In order to use your devices, plug them into the product one after the other.
Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/ or safety notes.
Technical Data
- Operating voltage / current consumption 5 – 20 V max. 5 A
- Compatibility USB-C port
- System requirements Mac OS 10.8 ≥
- USB specification USB 3.2 Gen1
Note
- If there is interference or the product no longer responds, unplug the product, wait a few seconds and then plug it in again.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>