connexx CX39A21DC HD LED TV Instruction Manual

: June 4, 2024
: connexx

connexx CX39A21DC HD LED TV

connexx-CX39A21DC-HD-LED-TV-product-image

Important Safety Instructions

Warnings and Precautions
To prevent any injuries, the following safety precautions should be observed in the installation, use, servicing and maintenance of this equipment. Before operating this equipment, please read this manual completely, and keep it for future reference.

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Do not clean with strong chemical agents
The appliance is intended for household use only, and not for commercial or industrial use.
Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Care required with the use of this apparatus in tropical climates. Do not use the appliance under temperatures over 40°C.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use the attachments/accessories specified by the manufacturer.
Use only with a stand, or bracket, specified by the manufacturer, or sold with the apparatus.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Do not operate the unit if it is not working normally or has been damaged in anyway. Turn the unit off, unplug it from the power source and consult service personnel. Do not attempt to service this unit yourself.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Do not listen to headphones at high volumes; the excessive sound pressure from earphones can cause hearing loss.
Keep the player clean and never store it next to a heat source or in dirty, humid or wet places. Keep it out of direct sunlight.
Press the Player’s button gently. Pressing them or the screen too hard can damage the player.
Do not subject the product to harsh impacts. Do not drop the appliance. This may result in damage to the product. Do not touch, push or rub the surface of the LCD screen with any sharp or hard objects. When the surface of the LCD screen becomes dusty, wipe it with an absorbent cotton cloth or other soft material like chamois. Do not use acetone, toluene or alcohol to clean the surface of the screen. These chemicals will cause damage to the surface.
Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
WARNING: To reduce the risk of fire or electric shock, this apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
WARNING TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

Caution:

These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

About Your TV

Specifications

Model: CX39A21DC
Screen Size: 39”
Panel Resolution: 1366*768
Viewing Angle: 178(H)*178(V)
Aspect Ratio: 16:9
USB Port: Supports JPEG image/MP3 audio

Includes

Remote Control and 2 AAA Batteries
Base Stand and Screws
Instruction Manual
Wall-mount Screws (BM6*10mm)

Setup

Connecting the Stand

When placing TV on at surface, be careful not to push, scratch, or otherwise damage the front of the TV and LCD screen. Using a screwdriver, tighten the screws by hand. Using a power drill could damage the TV stand. connexx-
CX39A21DC-HD-LED-TV-1

Remote Batteries

Requires 2, AAA-size batteries (included)

Mounting the TV on a wall

If you mount this TV on the wall, follow the instructions exactly as set out by the manufacturer. Incomplete or improper installation may cause injury to you, and/or damage to the LED TV. When you have appropriate wall mount brackets, please install them by using the VESA screws included in TV PE bag.

Install Steps

connexx-CX39A21DC-HD-LED-TV-2

Assemble the wall mount adapter.
Install the wall mount adapter on a wall with screws.
Install the wall mount brackets onto rear cabinet with the VESA screws.
Buckle the brackets with TV into the wall mount adapter.

Please refer to the table below to ensure the correct size VESA mount is used with the TV.

TV size in inches

| VESA screw hole specs|

Screw Size mm

|

Quantity pcs

---|---|---|---
Width mm| Height mm
19-24| 100| 100| BM48| 4
28| 100| 100| BM610| 4
32| 200| 100| BM610| 4
39-43| 200| 200| BM610| 4
50-55| 400| 200| BM610| 4
65| 400| 400| BM610| 4

Orientation

TV Controls

INPUT Press to select the input source
MENU Press to enter the main menu
CH+ Press to skip to the next channel
CH- Press to skip to the previous channel
VOL+ Press to increase the volume
VOL- Press to decrease the volume

Inputs

DC 12V IN: Power (DC 12V or plugpack) input.
Headphone Jack: Headphone output jack.
PC Audio Input Jack: Connects to the Audio out jack of a computer.
VGA Input Jack: Connects to the VGA output jack on a personal computer.
Mini Line Out: Connects to the Audio in ports of an audio device.
HDMI 1 Input Jack: HDMI in.
HDMI 2 (ARC) Input Jack: HDMI in.
HDMI 3 Input Jack: HDMI in.
RF Input: Connects to the ANTENNA, CABLE, or CABLE BOX.
CVBS/Y/Pb/Pr: Composite/Component Video & Audio in
Optical Out: Connects to the Optical Audio in port of an audio device.
Audio Input Jack: Connects to the Audio out ports of an audio device.
USB: USB Port for media playback when Media is the TV’s selected source.

Remote

Remote Control

connexx-CX39A21DC-HD-LED-TV-4

REMOTE CONTROL OUTLOOK & FUNCTION KEY DEFINITION

(POWER] Press this button to switch to standby mode, and press it again to turn TV on.
(INPUT) Press to select the input source.
(S.MODEl This button is used to select the sound mode.
(P.MODEJ This button is used to adjust user picture mode, press this button repeatedly and select one of four settings.
[FREEZE] Static picture.
[SLEEP] Let you select amount of time be for your TV turn itself off automatically.
0-9 l Press 0-9 to select a TV channel directly when you are watching TV. To enter page number in teletext mode and so on.
-/–] Press this button to enter a program number with different digits.e.g .-for1 ,–for11,—for111.
[ C;J l To swap to the previous program from current program.
[INFO] The button is used to display current channel information.
[VOL+/-] Press to increase/ decrease the sound level.
[PROG+/-] Press to scan through orto select a channel.
[MUTE] Press this button to shut off sound of the TV temporarily, press again to restore TV sound.
[MENU] Brings up the main menu to the screen in TV mode.
[EXIT] Press EXIT to exit menu or sub menu.
[ A/Ti ◄ t ►t l Allows you to navigate the on-screen menus and adjust the system settings to your preference.
[CCD] Select closed caption mode. Press the key repeatedly to choose one of the modes among Off, CC1, CC2, CC3, CC4, Text1, Text2, Text3, Text4. [ ►II] Play/pause or begin to timeshift.
[ EPG J Press to show the Electronic Program Guide menu. [ ■ l Stop playing or stop recording.
[ .,_ l] During playback, press to select the previous track/chapter.
[ I◄◄] Switch to the previous display.
[ ►►ll] Move to the next display.
[GOTO] Jump to a specific time on a DVD/ VCD/MP3/WMA or CD.
[A-Bl] Press to start the A-B repeat function.
[REPEAT] Press to select repeat playback modes.
[ZOOM] This button is used to set display window.
[CH. LIST] Display program list.
[FAY.LIST] Press to select the channel in FAV List.
[ FAV l Press to select the favorite channel.
[MTS] Select MTS sound system. Press the key repeatedly to choose one of the modes among Mono, Stereo, Sap.

Setup Wizard

Connect RF cable to your TV Aerial socket.
TV Location

Set the TV Mode to Home or Retail display use.
Press button to select(Home / Store).
Press / button to select and press ENTER/ utton to enter the sub-menu.
Note: This page is only enable when you have Energy Star request.

Select Language
Pres button to select the language to be used for menus and message.
Press / button to select and press ENTER/ button to enter the sub-menu.

Select Time
Press / button to select the time zone, daylight saving time and time format you want.
Pres button on the remote control to adjust.
Press / button on the remote control to select and press ENTER/ button to enter the sub-menu.

Auto Scan
Pres button to select the antenna type.
Press / button to select and press ENTER/ button to start auto scan.
Press M Press button to select.

Press ENTER / to enter.
Press MENU again to exit or back to parent menu.
Press button to select among Menu Language Transparent SD Time out lose aptiover Scan input Labe
the setting restore Default up Wizard Voice Guidance Video Description.

Press ENTER / to enter.
Press button to adjust.
Press MENU again or back to parent menu.

Press M Press button to select.
Press ENTER / to enter.
Press MENU again to exit or back to parent menu.
Press button to select among Picture Mod Brightness ontras olo Tin harpnes olor Temperature
Advance ettings.

Press ENTER / to enter.
Press button to adjust.
Press MENU again or back to parent menu.

Press M button to select.
Press ENTER / to enter.
Press MENU again to exit or back to parent menu.
Press button to select among Sound Mode Trebl as alanc MTS Audio Languag Digital Audio Output
Surround Sound AVL.

Press ENTER / to enter.
Press button to adjust.
Press MENU again or back to parent menu.

Press M Press button to select.
Press ENTER / to enter.
Press MENU again to exit or back to parent menu.
Press button to select among Sleep Time Time Zon aylight Saving Tim Time Forma Auto Cloc lock.
Press ENTER / to enter.

Press button to adjust.
Press MENU again or back to parent menu.

Press M Press button to select.
Press ENTER / to enter.
Press MENU again to exit or back to parent menu.
Press button to select among Change Password Key Loc ystem Loc nput Bloc S Ratin anada Ratin
RRT Settin eset RRT.
Press ENTER / to enter.
Press button to adjust.
Press MENU again or back to parent menu.
Enter your 4-digital password. Default password is 0000,and if forget what you set, please call the service center.

Press M Press button to select.
Press ENTER / to enter.
Press MENU again to exit or back to parent menu.
Press button to select among Air Cabl Auto Sca avorite Channel Lis how Hid hannel Numbe hannel Label .
Press ENTER / to enter.
Press button to adjust.
Press MENU again or back to parent menu.

Note: Before operating Media menu,Plug in USB device, then press INPUT button to set the Input Source to Media .
Media in the Source menu, then press Enter button to enter.
Press ◄ /► button to select PHOTO in the main menu, then press Enter button to enter. Press Menu button to return back to the previous menu and exit menu to quit.
Press ◄ / ► button to select drive disk you want to watch, then press Enter button to enter.
Press ◄ / ► button to select return option to back to the previous menu.

Press ◄ / ► button to select the file you want to watch in the file selecting menu, then press Enter button to display picture.

When highlighting the option you select, the file information will appear on the right and picture will be previewed in the center
Press ◄ /► button to select the file folder you want to search in the file selecting menu, then press Enter button on your remote control to enter sub-menu.
Press ◄ /► button to select the file you want to delete in the file selecting menu, then press red button on your remote control and press Enter button to delete files

Press ◄ /► button to select MUSIC in the main menu, then press Enter button to enter. Press Menu button to return back to the previous menu and exit menu to quit.
Press ◄ / ► button to select drive disk you want to watch, then press Enter button to enter.

Press ◄ / ► button to select return option to back to the previous menu.
Press ◄ / ► button to select the file you want to watch in the file selecting menu, then press Enter button to add the file to play list, press media button to display and operate file details. When highlighting the option you select, the file information will appear on the right

Press ◄ /► button to select menu in the bottom you want to run, then press Enter button to operate.
Press Menu button to back to the previous menu and exit button to quit the entire menu.

Press T button to hide the menu int the bottom.

Troubleshooting

Problem	Solution/Issue
TV does not operate	Make sure the power cord is plugged in. Try

another AC outlet. Unplug unit for an hour, then plug it back in.
Normal picture, but no sound| Check the volume settings. Sound muted? Press MUTE button. Try another channel. Check audio cable connections.
The remote control does not work| Make the remote control is in range with no obstructions. Check the batteries. Correct operating mode set: TV, VCR etc.
Poor sound or no sound| Station or Cable TV experiencing problems, tune to another station. Check sound adjustments (Volume or Mute). Check for sources of possible interference.
Poor picture or no picture| Station or Cable TV experiencing problems, tune to another station. Make sure channels are set into memory. Check antenna or Cable TV connections, adjust antenna. Check for sources of possible interference. Check picture control adjustments.
Poor TV reception| Adjust the antenna position to a stronger signal receiving angle. Check the Antenna connection is tight to the TV. Check there is power supplied to the Antenna distribution box. RV. Ensure the internal RV coax jump cable is connected to the correct port.
**Poor Cable / Satellite TV Reception| Check incoming Cable is connected correctly to RV. Ensure cable splitter box has power. RV. Ensure the internal RV coax jump cable is connected to the correct port. Check Dish has not obstruction.
**| Sleep Timer is set. Power interrupted.
TV AV input plays black and white| Check RCA connections on the back of the TV and from the source to ensure they are connected to the correct connections. Ensure the yellow connection is in the correct port.

Customer Support

Warranty

Limited 1 Year Warranty
The Manufacturer warrants this product to be free from defects in workmanship and materials,
under normal use and conditions, for a period of 1 year for parts and 90 days for labor from the original date of purchase. The Manufacturer agrees, at its option during the warranty period, to repair any defect in parts, material or workmanship, or to furnish a repaired or refurbished product of equal value in exchange without charge
(except for a fee for shipping, handling, packing, return postage, and insurance which will be incurred by the
not transferable to any person or entity other than the original purchaser, and does not cover the costs incurred from installation, removal, or reinstallation of the product.
The extent of the Manufacturer’s liability under this warranty is limited to the repair or replacement provided above. In no event shall the Manufacturer’s liability exceed the purchase price paid by the purchaser for the product.
Services provided under the terms of this warranty are your exclusive remedy.
Coverage Does NOT Include:

Any product which has been subject to damage due to an act of God, misuse, neglect, accident, abuse, commercial use.
Damage due to improper installation, operation or maintenance, or attempted repair by anyone other than the Manufacturer.
Damage to external media devices such as DVDs, CDs, iPod, iPhone, MP3 players, and/or memory devices.
Cosmetic damage, accidental damage, set-up adjustments, panel damage by non-moving images for a long
Re-manufactured units, product sold “As Is”, or closeout product.
The cost of shipping this product to the Service Center and its return to the owner.

How to Obtain Service
FOR WARRANTY SERVICE AND INSTRUCTIONS ON HOW TO RETURN YOUR PRODUCT CALL:
U.S.800-442-7717
International(574) 522-7781
Our technical support team is available Monday – Friday, 8 am to 5 pm EST
Please make sure to place the product in its original packaging, or packaging that provides the same amount of protection as the original packaging.
River Park Inc.
21953 Protecta Drive | Elkhart, IN 46516 http://www.riverparkinc.com
U.S.800-442-7717
International(574) 522-7781