rapoo E6080 Bluetooth Keyboard User Guide
- June 6, 2024
- rapoo
Table of Contents
rapoo E6080 Bluetooth Keyboard
Package contents
Overview
Fn+F1 =Back
Fn+F2 =Forward
Fn+F3 =Homepage
Fn+F4 =Email
Fn+F5 =Multimedia player
Fn+F6 =Play / Pause
Fn+F7 =Stop
Fn+F8 =Previous track
Fn+F9 =Next track
Fn+F10 =Volume –
Fn+F11 =Volume+
Fn+F12 =Mute
Bluetooth mode
1. Press and hold Fn+1、Fn+2 or Fn+3at least 3 seconds to pair 3 different
devices via Bluetooth. The keyboard is discoverable for 60 seconds.
2. Complete Bluetooth pairing on your device.
Bluetooth pairing
Windows®7 and 8
- Click the “Start” button, then select Control Panel > Add a device
- Select the RAPOO BT3.0 KB/RAPOO BLE KB from the list.*
- Click Next and follow any other instructions that may appear on the screen.
Windows®10
- Click the “Start” button, then select Settings > Devices > Bluetooth.
- Select the RAPOO BT3.0 KB/RAPOO BLE KB from the list.*
- Click Pair and follow any other instructions that may appear on the screen.
Note: RAPOO BLE requires Win8 or later version
Switching among paired devices
Press key combinations of the keyboard, Fn+1, Fn+2 and Fn+3 to switch among
paired devices.
Pair 3 devices via Bluetooth.
Charging indicator
When E6080 is charging, red LED is on. When it is fully charged, red LED is
off.
System Requirements
Windows® XP / Vista / 7 / 8 / 10 or later, USB port
Warranty
The device is provided with two-year limited hardware warranty from the purchase day. Please see www.rapoo.com for more information.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
This equipment complies with Part 15 of the FCC Rules.Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Caution
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void
the user authority to operate the equipment.
ISEDC RSS warning
This device complies with Industry Canada licence-exempt RSS standard (s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
ISEDC Radiation Exposure Statement:
This equipment complies with ISEDC RF radiation exposure limits set forth for
an uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
It is forbidden to reproduce any part of this quick start guide without the permission of Shenzhen Rapoo Technology Co., Ltd.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>