RX WARMTH RXW-1LS Blanket Warmer Instruction Manual

Table of Contents

RXW-1LS Blanket Warmer
Instruction Manual Usage and Care Instructions

The use of Non-OEM components is strictly prohibited and will void all warranties, both Express and Implied. Electric RX Warmth Blanket Warmers should only be used with the HBPS-1 (AC Pwr. Supply), and/or HBPC-AMP-72 (12vDC Pwr. Cord) *

Place blanket(s) into the RX Warmth bag. Close front flap securely by pressing Velcro strips together.
Insert 12vDC power cord into your vehicles lighter outlet, or plug the purchased AC power supply into an available AC outlet.
Attach power cord to the RX Warmth bag using the white connector located on the front of the bag.
If using a 12vDC plug, make sure the plug adapter fits securely into the lighter outlet (a loose connection could damage plug and stop power to the Blanket Warmer).

Remove Heating Elements using access panel found on the rear of the bag (zippered opening).
RXWarmth bags can be washed using a commercial washing machine, such as those found at your local
Laundromat. Pre-treat any heavily soiled areas with a dish detergent such as Dawn. This will help loosen existing grease and dirt, In turn making the machine wash more effective.
Wash bags on “Normal” cycle, using HOT water and a standard detergent.
After bags have gone through a complete cycle, check the bags for badly soiled areas which may not have come clean with a single treatment, and wash again.

DRYING INSTRUCTIONS

Make sure the front flap of the HOT BAG is closed, and that the rear access pouch is unzipped and left open.
Dry bags on MED-HIGH heat for approx. 20 minutes.
If bags are still damp, install the heating elements in the bag and plug the bag into a power supply. This will help dry the bags from the inside out, and will reduce the risk of mildew.

DO NOT

Do Not stand bags on end
Do Not set any items on top of the bag.
Do Not use dishwasher or dryer.
Do Not dry clean or steam clean.
Do Not place sharp objects in or on the RX Warmth bag.
Do Not leave RX Warmth bag plugged into 12v outlet when not in use (may discharge battery).

12vDC Power Cord (HBPC-AMP-72): Turn 12vDC plug inside the lighter socket to improve connection. Green LED will illuminate on the power plug when a proper connection is made.
Check fuse located in the cigarette plug (unscrew tip – turn counter clockwise to remove fuse)
Check fuse of your vehicles cigarette lighter, located in the main fuse panel.
Desktop Power Supply (HBPS-1): Check connection to your power supply and wall outlet (applies only when using the AC Power Supply).
Check power cord and plug for broken or frayed wires.
Make sure connector contacts are clean and free of corrosion.

Read User Manual Online (PDF format)