velleman VMA450 LCD Module User Manual
- June 3, 2024
- Velleman
Table of Contents
velleman VMA450 LCD Module
Introduction
To all residents of the European Union
- Important environmental information about this product
- This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service.
- Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
- Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, do not install or use it and contact your dealer.
Safety Instructions
- Read and understand this manual and all safety signs before using this appliance.
- Indoor use only.
- This device can be used by children aged from 8 years and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the device in a safe way and understand the hazards involved. Children shall not play with the device. Cleaning and user maintenance shall not be made by children without supervision.
General Guidelines
- Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
- All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to the device is not covered by the warranty.
- Only use the device for its intended purpose. Using the device in an unauthorised way will void the warranty.
- Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any ensuing defects or problems.
- Nor Velleman nv nor its dealers can be held responsible for any damage (extraordinary, incidental or indirect) – of any nature (financial, physical…) arising from the possession, use or failure of this product.
- Keep this manual for future reference.
What is Arduino®
- Arduino® is an open-source prototyping platform based in easy-to-use hardware and software.
- Arduino® boards are able to read inputs – light-on sensor, a finger on a button or a Twitter message – and turn it into an output – activating of a motor, turning on an
- LED, publishing something online. You can tell your board what to do by sending a set of instructions to the microcontroller on the board. To do so, you use the Arduino programming language (based on Wiring) and the Arduino® software IDE (based on Processing).
- Surf to www.arduino.cc and www.arduino.org for more information.
Overview
General
The VMA450 is an Arduino® compatible LCD display module with high speed I²C
interface. It can display 20 x 4 characters (white characters on a blue
background).
Specifications
Specifications
- supply voltage color…………………………………………………………………………………………………………………………………… 5 VDC
- background…………………………………………………………………………………………………………………………………….. blue
- characters…………………………………………………………………………………………………………………………………….. white
- contrast…………………………………………………………………………………………………………………. adjustable by trimmer
- interface………………………………………………………………………………………………………………………………………………….. I²C
- I²C address………………………………………………………………………… 0x20 to 0x27 adjustable (default = 0x27)
- number of characters……………………………………………………………………………………….. 20 characters x 4 lines
- dot size………………………………………………………………………………………………….. 0.55 x 0.55 mm (0.02 x 0.02″)
- dot pitch……………………………………………………………………………………………. 0.60 x 0.60 mm (0.023 x 0.023″)
- character seize…………………………………………………………………………………….. 2.96 x 4.75 mm (0.11 x 0.19″)
- character pitch…………………………………………………………………………………….. 3.55 x 5.35 mm (0.14 x 0.21″)
- dimensions…………………………………………………………………………….. 98 x 60 x 24 mm (3.86 x 2.36 x 0.94″)
1 | jumper for LCD backlight |
---|---|
2 | PCF8574 |
3 | 16-pin LCD header |
4 | LCD contrast adjustment |
5 | PWR/I2C interface |
--- | --- |
6 | power LED |
7 | I2C address setting |
I2C Address Setting Table
inputs | I2C bus slave address |
---|---|
A2 | A1 |
L | L |
L | L |
L | H |
L | H |
H | L |
H | L |
H | H |
H | H |
The default address is 0x27, with no jumpers.
Connection VMA450 to a VMA100/Arduino® UNO
VMA100/Arduino ® UNO
5V
GND
A4
A5
VMA450
VCC
GND
SDA
SCL
Operation
- Connect the VMA450 to the VMA100/Arduino® Uno.
- Download the library file LiquidCrystal_I2C.zip from our website www.velleman.eu.
- Open the Arduino® IDE and connect the VMA100/Arduino® Uno to your laptop/desktop.
- Load the LiquidCrystal_I2C.ZIP into the IDE.
- Now, go to Examples and load one of the 4 examples from this library, g. HelloWorld.
- Compile and upload the HelloWorld sketch.
- The result should be like the below:
Use this device with original accessories only. Velleman nv cannot be held responsible in the event of damage or injury resulting from (incorrect) use of this device. For more info concerning this product and the latest version of this manual, please visit our website www.velleman.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights
reserved. No part of this manual may be copied, reproduced, translated or
reduced to any electronic medium or otherwise without the prior written
consent of the copyright holder.
Velleman® Service and Quality Warranty
Since its foundation in 1972, Velleman® acquired extensive experience in the
electronics world and currently distributes its products in over 85 countries.
All our products fulfil strict quality requirements and legal stipulations in
the EU. In order to ensure the quality, our products regularly go through an
extra quality check, both by an internal quality department and by specialized
external organisations. If, all precautionary measures notwithstanding,
problems should occur, please make appeal to our warranty (see guarantee
conditions).
General Warranty Conditions Concerning Consumer Products(for EU):
-
All consumer products are subject to a 24-month warranty on production flaws and defective material as from the original date of purchase.
-
Velleman® can decide to replace an article with an equivalent article, or to refund the retail value totally or partially when the complaint is valid and a free repair or replacement of the article is impossible, or if the expenses are out of proportion. You will be delivered a replacing article or a refund at the value of 100% of the purchase price in case of a flaw occurred in the first year after the date of purchase and delivery, or a replacing article at 50% of the purchase price or a refund at the value of 50% of the retail value in case of a flaw occurred in the second year after the date of purchase and delivery.
-
Not covered by warranty:
-
all direct or indirect damage caused after delivery to the article (e.g. by oxidation, shocks, falls, dust, dirt, humidity…), and by the article, as well as its contents (e.g. data loss), compensation for loss of profits;
-
consumable goods, parts or accessories that are subject to an aging process during normal use, such as batteries (rechargeable, non-rechargeable, built-in or replaceable), lamps, rubber parts, drive belts…
(unlimited list); -
flaws resulting from fire, water damage, lightning, accident, natural disaster, etc.…;
-
flaws caused deliberately, negligently or resulting from improper handling, negligent maintenance, abusive use or use contrary to the manufacturer’s instructions;
-
damage caused by a commercial, professional or collective use of the article (the warranty validity will be reduced to six (6) months when the article is used professionally);
-
damage resulting from an inappropriate packing and shipping of the article;
-
all damage caused by modification, repair or alteration performed by a third party without written permission by Velleman®.
-
Articles to be repaired must be delivered to your Velleman® dealer, solidly packed (preferably in the original packaging), and be completed with the original receipt of purchase and a clear flaw description.
-
Hint: In order to save on cost and time, please reread the manual and check if the flaw is caused by obvious causes prior to presenting the article for repair. Note that returning a non-defective article can also involve handling costs.
-
Repairs occurring after warranty expiration are subject to shipping costs.
-
The above conditions are without prejudice to all commercial warranties.
-
The above enumeration is subject to modification according to the article (see the article’s manual).
-
Made in PRC
-
Imported by Velleman nv
-
Legen Heirweg 33, 9890 Gavere, Belgiumwww.velleman.eu
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>